blob: edd3abb9a9f19f8ff3fa531a9422ce22d47cda7c [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright 2016 Freescale Semiconductor, Inc.
* Copyright 2017-2018 NXP.
*
*/
#include <dt-bindings/clock/imx6sll-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "imx6sll-pinfunc.h"
/ {
#address-cells = <1>;
#size-cells = <1>;
aliases {
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
spi0 = &ecspi1;
spi1 = &ecspi2;
spi3 = &ecspi3;
spi4 = &ecspi4;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
operating-points = <
/* kHz uV */
996000 1275000
792000 1175000
396000 1075000
198000 975000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC-PU uV */
996000 1175000
792000 1175000
396000 1175000
198000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
clocks = <&clks IMX6SLL_CLK_ARM>,
<&clks IMX6SLL_CLK_PLL2_PFD2>,
<&clks IMX6SLL_CLK_STEP>,
<&clks IMX6SLL_CLK_PLL1_SW>,
<&clks IMX6SLL_CLK_PLL1_SYS>;
clock-names = "arm", "pll2_pfd2_396m", "step",
"pll1_sw", "pll1_sys";
nvmem-cells = <&cpu_speed_grade>;
nvmem-cell-names = "speed_grade";
};
};
ckil: clock-ckil {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "ckil";
};
osc: clock-osc-24m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "osc";
};
ipp_di0: clock-ipp-di0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
clock-output-names = "ipp_di0";
};
ipp_di1: clock-ipp-di1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
clock-output-names = "ipp_di1";
};
tempmon: temperature-sensor {
compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gpc>;
fsl,tempmon = <&anatop>;
nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
nvmem-cell-names = "calib", "temp_grade";
clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&gpc>;
ranges;
ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
};
intc: interrupt-controller@a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
interrupt-parent = <&intc>;
};
L2: l2-cache@a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
arm,tag-latency = <4 2 3>;
arm,data-latency = <4 2 3>;
};
aips1: bus@2000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
spba: spba-bus@2000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
spdif: spdif@2004000 {
compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
<&clks IMX6SLL_CLK_OSC>,
<&clks IMX6SLL_CLK_SPDIF>,
<&clks IMX6SLL_CLK_DUMMY>,
<&clks IMX6SLL_CLK_DUMMY>,
<&clks IMX6SLL_CLK_DUMMY>,
<&clks IMX6SLL_CLK_IPG>,
<&clks IMX6SLL_CLK_DUMMY>,
<&clks IMX6SLL_CLK_DUMMY>,
<&clks IMX6SLL_CLK_SPBA>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
"rxtx7", "dma";
status = "disabled";
};
ecspi1: spi@2008000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_ECSPI1>,
<&clks IMX6SLL_CLK_ECSPI1>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi2: spi@200c000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_ECSPI2>,
<&clks IMX6SLL_CLK_ECSPI2>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi3: spi@2010000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_ECSPI3>,
<&clks IMX6SLL_CLK_ECSPI3>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi4: spi@2014000 {
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_ECSPI4>,
<&clks IMX6SLL_CLK_ECSPI4>;
clock-names = "ipg", "per";
status = "disabled";
};
uart4: serial@2018000 {
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
"fsl,imx21-uart";
reg = <0x02018000 0x4000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
<&clks IMX6SLL_CLK_UART4_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
uart1: serial@2020000 {
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
"fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
<&clks IMX6SLL_CLK_UART1_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
uart2: serial@2024000 {
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
"fsl,imx21-uart";
reg = <0x02024000 0x4000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
<&clks IMX6SLL_CLK_UART2_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
ssi1: ssi-controller@2028000 {
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x02028000 0x4000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
<&clks IMX6SLL_CLK_SSI1>;
clock-names = "ipg", "baud";
status = "disabled";
};
ssi2: ssi-controller@202c000 {
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
<&clks IMX6SLL_CLK_SSI2>;
clock-names = "ipg", "baud";
status = "disabled";
};
ssi3: ssi-controller@2030000 {
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
reg = <0x02030000 0x4000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
<&clks IMX6SLL_CLK_SSI3>;
clock-names = "ipg", "baud";
status = "disabled";
};
uart3: serial@2034000 {
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
"fsl,imx21-uart";
reg = <0x02034000 0x4000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
dma-name = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
<&clks IMX6SLL_CLK_UART3_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
};
pwm1: pwm@2080000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM1>,
<&clks IMX6SLL_CLK_PWM1>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
pwm2: pwm@2084000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM2>,
<&clks IMX6SLL_CLK_PWM2>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
pwm3: pwm@2088000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM3>,
<&clks IMX6SLL_CLK_PWM3>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
pwm4: pwm@208c000 {
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PWM4>,
<&clks IMX6SLL_CLK_PWM4>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
};
gpt1: timer@2098000 {
compatible = "fsl,imx6sl-gpt";
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
<&clks IMX6SLL_CLK_GPT_SERIAL>;
clock-names = "ipg", "per";
};
gpio1: gpio@209c000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
};
gpio2: gpio@20a0000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 50 32>;
};
gpio3: gpio@20a4000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
<&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
<&iomuxc 21 6 11>;
};
gpio4: gpio@20a8000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
<&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
<&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
<&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
<&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
<&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
<&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
<&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
<&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
};
gpio5: gpio@20ac000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_GPIO5>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
<&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
<&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
<&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
<&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
<&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
<&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
<&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
<&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
<&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
<&iomuxc 21 137 1>;
};
gpio6: gpio@20b0000 {
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
reg = <0x020b0000 0x4000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_GPIO6>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
kpp: keypad@20b8000 {
compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_KPP>;
status = "disabled";
};
wdog1: watchdog@20bc000 {
compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_WDOG1>;
};
wdog2: watchdog@20c0000 {
compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_WDOG2>;
status = "disabled";
};
clks: clock-controller@20c4000 {
compatible = "fsl,imx6sll-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>;
assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>;
};
anatop: anatop@20c8000 {
compatible = "fsl,imx6sll-anatop",
"fsl,imx6q-anatop",
"syscon", "simple-mfd";
reg = <0x020c8000 0x4000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg_3p0: regulator-3p0@20c8120 {
compatible = "fsl,anatop-regulator";
reg = <0x20c8120>;
regulator-name = "vdd3p0";
regulator-min-microvolt = <2625000>;
regulator-max-microvolt = <3400000>;
anatop-reg-offset = <0x120>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
anatop-min-voltage = <2625000>;
anatop-max-voltage = <3400000>;
anatop-enable-bit = <0>;
};
};
usbphy1: usb-phy@20c9000 {
compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
"fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_USBPHY1>;
phy-3p0-supply = <&reg_3p0>;
fsl,anatop = <&anatop>;
};
usbphy2: usb-phy@20ca000 {
compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
"fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_USBPHY2>;
phy-reg_3p0-supply = <&reg_3p0>;
fsl,anatop = <&anatop>;
};
snvs: snvs@20cc000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x020cc000 0x4000>;
snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap = <&snvs>;
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
snvs_poweroff: snvs-poweroff {
compatible = "syscon-poweroff";
regmap = <&snvs>;
offset = <0x38>;
mask = <0x61>;
status = "disabled";
};
snvs_pwrkey: snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
};
};
src: reset-controller@20d8000 {
compatible = "fsl,imx6sll-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
gpc: interrupt-controller@20dc000 {
compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&intc>;
};
iomuxc: pinctrl@20e0000 {
compatible = "fsl,imx6sll-iomuxc";
reg = <0x020e0000 0x4000>;
};
gpr: iomuxc-gpr@20e4000 {
compatible = "fsl,imx6sll-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e4000 0x4000>;
};
csi: csi@20e8000 {
compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
reg = <0x020e8000 0x4000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_DUMMY>,
<&clks IMX6SLL_CLK_CSI>,
<&clks IMX6SLL_CLK_DUMMY>;
clock-names = "disp-axi", "csi_mclk", "disp_dcic";
status = "disabled";
};
sdma: dma-controller@20ec000 {
compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_IPG>,
<&clks IMX6SLL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
iram = <&ocram>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
pxp: pxp@20f0000 {
compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
reg = <0x20f0000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_PXP>;
clock-names = "axi";
};
lcdif: lcd-controller@20f8000 {
compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
reg = <0x020f8000 0x4000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
<&clks IMX6SLL_CLK_LCDIF_APB>,
<&clks IMX6SLL_CLK_DUMMY>;
clock-names = "pix", "axi", "disp_axi";
status = "disabled";
};
dcp: crypto@20fc000 {
compatible = "fsl,imx28-dcp";
reg = <0x020fc000 0x4000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_DCP>;
clock-names = "dcp";
};
};
aips2: bus@2100000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
usbotg1: usb@2184000 {
compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
"fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
fsl,anatop = <&anatop>;
ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled";
};
usbotg2: usb@2184200 {
compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
"fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
status = "disabled";
};
usbmisc: usbmisc@2184800 {
#index-cells = <1>;
compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
"fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
};
usdhc1: mmc@2190000 {
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_USDHC1>,
<&clks IMX6SLL_CLK_USDHC1>,
<&clks IMX6SLL_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-step = <2>;
fsl,tuning-start-tap = <20>;
status = "disabled";
};
usdhc2: mmc@2194000 {
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_USDHC2>,
<&clks IMX6SLL_CLK_USDHC2>,
<&clks IMX6SLL_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-step = <2>;
fsl,tuning-start-tap = <20>;
status = "disabled";
};
usdhc3: mmc@2198000 {
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_USDHC3>,
<&clks IMX6SLL_CLK_USDHC3>,
<&clks IMX6SLL_CLK_USDHC3>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-step = <2>;
fsl,tuning-start-tap = <20>;
status = "disabled";
};
i2c1: i2c@21a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_I2C1>;
status = "disabled";
};
i2c2: i2c@21a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
reg = <0x021a4000 0x4000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_I2C2>;
status = "disabled";
};
i2c3: i2c@21a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
reg = <0x021a8000 0x4000>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_I2C3>;
status = "disabled";
};
mmdc: memory-controller@21b0000 {
compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
};
ocotp: ocotp-ctrl@21bc000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx6sll-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6SLL_CLK_OCOTP>;
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
tempmon_calib: calib@38 {
reg = <0x38 4>;
};
tempmon_temp_grade: temp-grade@20 {
reg = <0x20 4>;
};
};
audmux: audmux@21d8000 {
compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
};
uart5: serial@21f4000 {
compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
"fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
<&clks IMX6SLL_CLK_UART5_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
};
};
};