blob: 7d385c3b22393c8182c136278cb6f9f243542bb6 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
#
# X86 Platform Specific Drivers
#
menuconfig X86_PLATFORM_DEVICES
bool "X86 Platform Specific Device Drivers"
default y
depends on X86
help
Say Y here to get to see options for device drivers for various
x86 platforms, including vendor-specific laptop extension drivers.
This option alone does not add any kernel code.
If you say N, all options in this submenu will be skipped and disabled.
if X86_PLATFORM_DEVICES
config ACPI_WMI
tristate "WMI"
depends on ACPI
help
This driver adds support for the ACPI-WMI (Windows Management
Instrumentation) mapper device (PNP0C14) found on some systems.
ACPI-WMI is a proprietary extension to ACPI to expose parts of the
ACPI firmware to userspace - this is done through various vendor
defined methods and data blocks in a PNP0C14 device, which are then
made available for userspace to call.
The implementation of this in Linux currently only exposes this to
other kernel space drivers.
This driver is a required dependency to build the firmware specific
drivers needed on many machines, including Acer and HP laptops.
It is safe to enable this driver even if your DSDT doesn't define
any ACPI-WMI devices.
config WMI_BMOF
tristate "WMI embedded Binary MOF driver"
depends on ACPI_WMI
default ACPI_WMI
help
Say Y here if you want to be able to read a firmware-embedded
WMI Binary MOF data. Using this requires userspace tools and may be
rather tedious.
To compile this driver as a module, choose M here: the module will
be called wmi-bmof.
config HUAWEI_WMI
tristate "Huawei WMI laptop extras driver"
depends on ACPI_BATTERY
depends on ACPI_WMI
depends on INPUT
select INPUT_SPARSEKMAP
select LEDS_CLASS
select LEDS_TRIGGERS
select LEDS_TRIGGER_AUDIO
select NEW_LEDS
help
This driver provides support for Huawei WMI hotkeys, battery charge
control, fn-lock, mic-mute LED, and other extra features.
To compile this driver as a module, choose M here: the module
will be called huawei-wmi.
config UV_SYSFS
tristate "Sysfs structure for UV systems"
depends on X86_UV
depends on SYSFS
help
This driver supports a sysfs tree describing information about
UV systems at /sys/firmware/sgi_uv/.
To compile this driver as a module, choose M here: the module will
be called uv_sysfs.
config INTEL_WMI_SBL_FW_UPDATE
tristate "Intel WMI Slim Bootloader firmware update signaling driver"
depends on ACPI_WMI
help
Say Y here if you want to be able to use the WMI interface to signal
Slim Bootloader to trigger update on next reboot.
To compile this driver as a module, choose M here: the module will
be called intel-wmi-sbl-fw-update.
config INTEL_WMI_THUNDERBOLT
tristate "Intel WMI thunderbolt force power driver"
depends on ACPI_WMI
help
Say Y here if you want to be able to use the WMI interface on select
systems to force the power control of Intel Thunderbolt controllers.
This is useful for updating the firmware when devices are not plugged
into the controller.
To compile this driver as a module, choose M here: the module will
be called intel-wmi-thunderbolt.
config MXM_WMI
tristate "WMI support for MXM Laptop Graphics"
depends on ACPI_WMI
help
MXM is a standard for laptop graphics cards, the WMI interface
is required for switchable nvidia graphics machines
config PEAQ_WMI
tristate "PEAQ 2-in-1 WMI hotkey driver"
depends on ACPI_WMI
depends on INPUT
help
Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s.
config XIAOMI_WMI
tristate "Xiaomi WMI key driver"
depends on ACPI_WMI
depends on INPUT
help
Say Y here if you want to support WMI-based keys on Xiaomi notebooks.
To compile this driver as a module, choose M here: the module will
be called xiaomi-wmi.
config GIGABYTE_WMI
tristate "Gigabyte WMI temperature driver"
depends on ACPI_WMI
depends on HWMON
help
Say Y here if you want to support WMI-based temperature reporting on
Gigabyte mainboards.
To compile this driver as a module, choose M here: the module will
be called gigabyte-wmi.
config ACERHDF
tristate "Acer Aspire One temperature and fan driver"
depends on ACPI && THERMAL
select THERMAL_GOV_BANG_BANG
help
This is a driver for Acer Aspire One netbooks. It allows to access
the temperature sensor and to control the fan.
After loading this driver the BIOS is still in control of the fan.
To let the kernel handle the fan, do:
echo -n enabled > /sys/class/thermal/thermal_zoneN/mode
where N=0,1,2... depending on the number of thermal nodes and the
detection order of your particular system. The "type" parameter
in the same node directory will tell you if it is "acerhdf".
For more information about this driver see
<https://piie.net/files/acerhdf_README.txt>
If you have an Acer Aspire One netbook, say Y or M
here.
config ACER_WIRELESS
tristate "Acer Wireless Radio Control Driver"
depends on ACPI
depends on INPUT
help
The Acer Wireless Radio Control handles the airplane mode hotkey
present on new Acer laptops.
Say Y or M here if you have an Acer notebook with an airplane mode
hotkey.
If you choose to compile this driver as a module the module will be
called acer-wireless.
config ACER_WMI
tristate "Acer WMI Laptop Extras"
depends on ACPI
select LEDS_CLASS
select NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on SERIO_I8042
depends on INPUT
depends on RFKILL || RFKILL = n
depends on ACPI_WMI
select INPUT_SPARSEKMAP
# Acer WMI depends on ACPI_VIDEO when ACPI is enabled
select ACPI_VIDEO if ACPI
help
This is a driver for newer Acer (and Wistron) laptops. It adds
wireless radio and bluetooth control, and on some laptops,
exposes the mail LED and LCD backlight.
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
config AMD_PMC
tristate "AMD SoC PMC driver"
depends on ACPI && PCI
help
The driver provides support for AMD Power Management Controller
primarily responsible for S2Idle transactions that are driven from
a platform firmware running on SMU. This driver also provides a debug
mechanism to investigate the S2Idle transactions and failures.
Say Y or M here if you have a notebook powered by AMD RYZEN CPU/APU.
If you choose to compile this driver as a module the module will be
called amd-pmc.
config ADV_SWBUTTON
tristate "Advantech ACPI Software Button Driver"
depends on ACPI && INPUT
help
Say Y here to enable support for Advantech software defined
button feature. More information can be found at
<http://www.advantech.com.tw/products/>
To compile this driver as a module, choose M here. The module will
be called adv_swbutton.
config APPLE_GMUX
tristate "Apple Gmux Driver"
depends on ACPI && PCI
depends on PNP
depends on BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE
depends on ACPI_VIDEO=n || ACPI_VIDEO
help
This driver provides support for the gmux device found on many
Apple laptops, which controls the display mux for the hybrid
graphics as well as the backlight. Currently only backlight
control is supported by the driver.
config ASUS_LAPTOP
tristate "Asus Laptop Extras"
depends on ACPI
select LEDS_CLASS
select NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
depends on RFKILL || RFKILL = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
help
This is a driver for Asus laptops, Lenovo SL and the Pegatron
Lucid tablet. It may also support some MEDION, JVC or VICTOR
laptops. It makes all the extra buttons generate standard
ACPI events and input events, and on the Lucid the built-in
accelerometer appears as an input device. It also adds
support for video output switching, LCD backlight control,
Bluetooth and Wlan control, and most importantly, allows you
to blink those fancy LEDs.
For more information see <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here.
config ASUS_WIRELESS
tristate "Asus Wireless Radio Control Driver"
depends on ACPI
depends on INPUT
select NEW_LEDS
select LEDS_CLASS
help
The Asus Wireless Radio Control handles the airplane mode hotkey
present on some Asus laptops.
Say Y or M here if you have an ASUS notebook with an airplane mode
hotkey.
If you choose to compile this driver as a module the module will be
called asus-wireless.
config ASUS_WMI
tristate "ASUS WMI Driver"
depends on ACPI_WMI
depends on ACPI_BATTERY
depends on INPUT
depends on HWMON
depends on BACKLIGHT_CLASS_DEVICE
depends on RFKILL || RFKILL = n
depends on HOTPLUG_PCI
depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
select LEDS_CLASS
select NEW_LEDS
help
Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new
Asus Notebooks).
To compile this driver as a module, choose M here: the module will
be called asus-wmi.
config ASUS_NB_WMI
tristate "Asus Notebook WMI Driver"
depends on ASUS_WMI
depends on SERIO_I8042 || SERIO_I8042 = n
help
This is a driver for newer Asus notebooks. It adds extra features
like wireless radio and bluetooth control, leds, hotkeys, backlight...
For more information, see
<file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
If you have an ACPI-WMI compatible Asus Notebook, say Y or M
here.
config EEEPC_LAPTOP
tristate "Eee PC Hotkey Driver"
depends on ACPI
depends on INPUT
depends on RFKILL || RFKILL = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on HOTPLUG_PCI
depends on BACKLIGHT_CLASS_DEVICE
select HWMON
select LEDS_CLASS
select NEW_LEDS
select INPUT_SPARSEKMAP
help
This driver supports the Fn-Fx keys on Eee PC laptops.
It also gives access to some extra laptop functionalities like
Bluetooth, backlight and allows powering on/off some other
devices.
If you have an Eee PC laptop, say Y or M here. If this driver
doesn't work on your Eee PC, try eeepc-wmi instead.
config EEEPC_WMI
tristate "Eee PC WMI Driver"
depends on ASUS_WMI
help
This is a driver for newer Eee PC laptops. It adds extra features
like wireless radio and bluetooth control, leds, hotkeys, backlight...
For more information, see
<file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M
here.
source "drivers/platform/x86/dell/Kconfig"
config AMILO_RFKILL
tristate "Fujitsu-Siemens Amilo rfkill support"
depends on RFKILL
depends on SERIO_I8042
help
This is a driver for enabling wifi on some Fujitsu-Siemens Amilo
laptops.
config FUJITSU_LAPTOP
tristate "Fujitsu Laptop Extras"
depends on ACPI
depends on INPUT
depends on BACKLIGHT_CLASS_DEVICE
depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
select NEW_LEDS
select LEDS_CLASS
help
This is a driver for laptops built by Fujitsu:
* P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
* Possibly other Fujitsu laptop models
* Tested with S6410 and S7020
It adds support for LCD brightness control and some hotkeys.
If you have a Fujitsu laptop, say Y or M here.
config FUJITSU_TABLET
tristate "Fujitsu Tablet Extras"
depends on ACPI
depends on INPUT
help
This is a driver for tablets built by Fujitsu:
* Lifebook P1510/P1610/P1620/Txxxx
* Stylistic ST5xxx
* Possibly other Fujitsu tablet models
It adds support for the panel buttons, docking station detection,
tablet/notebook mode detection for convertible and
orientation detection for docked slates.
If you have a Fujitsu convertible or slate, say Y or M here.
config GPD_POCKET_FAN
tristate "GPD Pocket Fan Controller support"
depends on ACPI
depends on THERMAL
help
Driver for the GPD Pocket vendor specific FAN02501 ACPI device
which controls the fan speed on the GPD Pocket.
Without this driver the fan on the Pocket will stay off independent
of the CPU temperature. Say Y or M if the kernel may be used on a
GPD pocket.
config HP_ACCEL
tristate "HP laptop accelerometer"
depends on INPUT && ACPI
depends on SERIO_I8042
select SENSORS_LIS3LV02D
select NEW_LEDS
select LEDS_CLASS
help
This driver provides support for the "Mobile Data Protection System 3D"
or "3D DriveGuard" feature of HP laptops. On such systems the driver
should load automatically (via ACPI alias).
Support for a led indicating disk protection will be provided as
hp::hddprotect. For more information on the feature, refer to
Documentation/misc-devices/lis3lv02d.rst.
To compile this driver as a module, choose M here: the module will
be called hp_accel.
config WIRELESS_HOTKEY
tristate "Wireless hotkey button"
depends on ACPI
depends on INPUT
help
This driver provides supports for the wireless buttons found on some AMD,
HP, & Xioami laptops.
On such systems the driver should load automatically (via ACPI alias).
To compile this driver as a module, choose M here: the module will
be called wireless-hotkey.
config HP_WMI
tristate "HP WMI extras"
depends on ACPI_WMI
depends on INPUT
depends on RFKILL || RFKILL = n
select INPUT_SPARSEKMAP
select ACPI_PLATFORM_PROFILE
help
Say Y here if you want to support WMI-based hotkeys on HP laptops and
to read data from WMI such as docking or ambient light sensor state.
To compile this driver as a module, choose M here: the module will
be called hp-wmi.
config TC1100_WMI
tristate "HP Compaq TC1100 Tablet WMI Extras"
depends on !X86_64
depends on ACPI
depends on ACPI_WMI
help
This is a driver for the WMI extensions (wireless and bluetooth power
control) of the HP Compaq TC1100 tablet.
config IBM_RTL
tristate "Device driver to enable PRTL support"
depends on PCI
help
Enable support for IBM Premium Real Time Mode (PRTM).
This module will allow you the enter and exit PRTM in the BIOS via
sysfs on platforms that support this feature. System in PRTM will
not receive CPU-generated SMIs for recoverable errors. Use of this
feature without proper support may void your hardware warranty.
If the proper BIOS support is found the driver will load and create
/sys/devices/system/ibm_rtl/. The "state" variable will indicate
whether or not the BIOS is in PRTM.
state = 0 (BIOS SMIs on)
state = 1 (BIOS SMIs off)
config IDEAPAD_LAPTOP
tristate "Lenovo IdeaPad Laptop Extras"
depends on ACPI
depends on RFKILL && INPUT
depends on SERIO_I8042
depends on BACKLIGHT_CLASS_DEVICE
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on ACPI_WMI || ACPI_WMI = n
select ACPI_PLATFORM_PROFILE
select INPUT_SPARSEKMAP
select NEW_LEDS
select LEDS_CLASS
help
This is a driver for Lenovo IdeaPad netbooks contains drivers for
rfkill switch, hotkey, fan control and backlight control.
config SENSORS_HDAPS
tristate "Thinkpad Hard Drive Active Protection System (hdaps)"
depends on INPUT
help
This driver provides support for the IBM Hard Drive Active Protection
System (hdaps), which provides an accelerometer and other misc. data.
ThinkPads starting with the R50, T41, and X40 are supported. The
accelerometer data is readable via sysfs.
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.
If your ThinkPad is not recognized by the driver, please update to latest
BIOS. This is especially the case for some R52 ThinkPads.
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
config THINKPAD_ACPI
tristate "ThinkPad ACPI Laptop Extras"
depends on ACPI
depends on ACPI_BATTERY
depends on INPUT
depends on RFKILL || RFKILL = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on BACKLIGHT_CLASS_DEVICE
select ACPI_PLATFORM_PROFILE
select HWMON
select NVRAM
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGERS
select LEDS_TRIGGER_AUDIO
help
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
output switching, ThinkLight control, UltraBay eject and more.
For more information about this driver see
<file:Documentation/admin-guide/laptops/thinkpad-acpi.rst> and
<http://ibm-acpi.sf.net/> .
This driver was formerly known as ibm-acpi.
Extra functionality will be available if the rfkill (CONFIG_RFKILL)
and/or ALSA (CONFIG_SND) subsystems are available in the kernel.
Note that if you want ThinkPad-ACPI to be built-in instead of
modular, ALSA and rfkill will also have to be built-in.
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
config THINKPAD_ACPI_ALSA_SUPPORT
bool "Console audio control ALSA interface"
depends on THINKPAD_ACPI
depends on SND
depends on SND = y || THINKPAD_ACPI = SND
default y
help
Enables monitoring of the built-in console audio output control
(headphone and speakers), which is operated by the mute and (in
some ThinkPad models) volume hotkeys.
If this option is enabled, ThinkPad-ACPI will export an ALSA card
with a single read-only mixer control, which should be used for
on-screen-display feedback purposes by the Desktop Environment.
Optionally, the driver will also allow software control (the
ALSA mixer will be made read-write). Please refer to the driver
documentation for details.
All IBM models have both volume and mute control. Newer Lenovo
models only have mute control (the volume hotkeys are just normal
keys and volume control is done through the main HDA mixer).
config THINKPAD_ACPI_DEBUGFACILITIES
bool "Maintainer debug facilities"
depends on THINKPAD_ACPI
help
Enables extra stuff in the thinkpad-acpi which is completely useless
for normal use. Read the driver source to find out what it does.
Say N here, unless you were told by a kernel maintainer to do
otherwise.
config THINKPAD_ACPI_DEBUG
bool "Verbose debug mode"
depends on THINKPAD_ACPI
help
Enables extra debugging information, at the expense of a slightly
increase in driver size.
If you are not sure, say N here.
config THINKPAD_ACPI_UNSAFE_LEDS
bool "Allow control of important LEDs (unsafe)"
depends on THINKPAD_ACPI
help
Overriding LED state on ThinkPads can mask important
firmware alerts (like critical battery condition), or misled
the user into damaging the hardware (undocking or ejecting
the bay while buses are still active), etc.
LED control on the ThinkPad is write-only (with very few
exceptions on very ancient models), which makes it
impossible to know beforehand if important information will
be lost when one changes LED state.
Users that know what they are doing can enable this option
and the driver will allow control of every LED, including
the ones on the dock stations.
Never enable this option on a distribution kernel.
Say N here, unless you are building a kernel for your own
use, and need to control the important firmware LEDs.
config THINKPAD_ACPI_VIDEO
bool "Video output control support"
depends on THINKPAD_ACPI
default y
help
Allows the thinkpad_acpi driver to provide an interface to control
the various video output ports.
This feature often won't work well, depending on ThinkPad model,
display state, video output devices in use, whether there is a X
server running, phase of the moon, and the current mood of
Schroedinger's cat. If you can use X.org's RandR to control
your ThinkPad's video output ports instead of this feature,
don't think twice: do it and say N here to save memory and avoid
bad interactions with X.org.
NOTE: access to this feature is limited to processes with the
CAP_SYS_ADMIN capability, to avoid local DoS issues in platforms
where it interacts badly with X.org.
If you are not sure, say Y here but do try to check if you could
be using X.org RandR instead.
config THINKPAD_ACPI_HOTKEY_POLL
bool "Support NVRAM polling for hot keys"
depends on THINKPAD_ACPI
default y
help
Some thinkpad models benefit from NVRAM polling to detect a few of
the hot key press events. If you know your ThinkPad model does not
need to do NVRAM polling to support any of the hot keys you use,
unselecting this option will save about 1kB of memory.
ThinkPads T40 and newer, R52 and newer, and X31 and newer are
unlikely to need NVRAM polling in their latest BIOS versions.
NVRAM polling can detect at most the following keys: ThinkPad/Access
IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
If you are not sure, say Y here. The driver enables polling only if
it is strictly necessary to do so.
config THINKPAD_LMI
tristate "Lenovo WMI-based systems management driver"
depends on ACPI_WMI
select FW_ATTR_CLASS
help
This driver allows changing BIOS settings on Lenovo machines whose
BIOS support the WMI interface.
To compile this driver as a module, choose M here: the module will
be called think-lmi.
source "drivers/platform/x86/intel/Kconfig"
config INTEL_ATOMISP2_LED
tristate "Intel AtomISP2 camera LED driver"
depends on GPIOLIB && LEDS_GPIO
help
Many Bay Trail and Cherry Trail devices come with a camera attached
to Intel's Image Signal Processor. Linux currently does not have a
driver for these, so they do not work as a camera. Some of these
camera's have a LED which is controlled through a GPIO.
Some of these devices have a firmware issue where the LED gets turned
on at boot. This driver will turn the LED off at boot and also allows
controlling the LED (repurposing it) through the sysfs LED interface.
Which GPIO is attached to the LED is usually not described in the
ACPI tables, so this driver contains per-system info about the GPIO
inside the driver, this means that this driver only works on systems
the driver knows about.
To compile this driver as a module, choose M here: the module
will be called intel_atomisp2_led.
config INTEL_ATOMISP2_PM
tristate "Intel AtomISP2 dummy / power-management driver"
depends on PCI && IOSF_MBI && PM
depends on !INTEL_ATOMISP
help
Power-management driver for Intel's Image Signal Processor found on
Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
is to turn the ISP off (put it in D3) to save power and to allow
entering of S0ix modes.
To compile this driver as a module, choose M here: the module
will be called intel_atomisp2_pm.
config INTEL_HID_EVENT
tristate "INTEL HID Event"
depends on ACPI
depends on INPUT
select INPUT_SPARSEKMAP
help
This driver provides support for the Intel HID Event hotkey interface.
Some laptops require this driver for hotkey support.
To compile this driver as a module, choose M here: the module will
be called intel_hid.
config INTEL_INT0002_VGPIO
tristate "Intel ACPI INT0002 Virtual GPIO driver"
depends on GPIOLIB && ACPI && PM_SLEEP
select GPIOLIB_IRQCHIP
help
Some peripherals on Bay Trail and Cherry Trail platforms signal a
Power Management Event (PME) to the Power Management Controller (PMC)
to wakeup the system. When this happens software needs to explicitly
clear the PME bus 0 status bit in the GPE0a_STS register to avoid an
IRQ storm on IRQ 9.
This is modelled in ACPI through the INT0002 ACPI device, which is
called a "Virtual GPIO controller" in ACPI because it defines the
event handler to call when the PME triggers through _AEI and _L02
methods as would be done for a real GPIO interrupt in ACPI.
To compile this driver as a module, choose M here: the module will
be called intel_int0002_vgpio.
config INTEL_MENLOW
tristate "Thermal Management driver for Intel menlow platform"
depends on ACPI_THERMAL
select THERMAL
help
ACPI thermal management enhancement driver on
Intel Menlow platform.
If unsure, say N.
config INTEL_OAKTRAIL
tristate "Intel Oaktrail Platform Extras"
depends on ACPI
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
help
Intel Oaktrail platform need this driver to provide interfaces to
enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y
here; it will only load on supported platforms.
config INTEL_VBTN
tristate "INTEL VIRTUAL BUTTON"
depends on ACPI
depends on INPUT
select INPUT_SPARSEKMAP
help
This driver provides support for the Intel Virtual Button interface.
Some laptops require this driver for power button support.
To compile this driver as a module, choose M here: the module will
be called intel_vbtn.
config MSI_LAPTOP
tristate "MSI Laptop Extras"
depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL
depends on INPUT && SERIO_I8042
select INPUT_SPARSEKMAP
help
This is a driver for laptops built by MSI (MICRO-STAR
INTERNATIONAL):
MSI MegaBook S270 (MS-1013)
Cytron/TCM/Medion/Tchibo MD96100/SAM2000
It adds support for Bluetooth, WLAN and LCD brightness control.
More information about this driver is available at
<http://0pointer.de/lennart/tchibo.html>.
If you have an MSI S270 laptop, say Y or M here.
config MSI_WMI
tristate "MSI WMI extras"
depends on ACPI_WMI
depends on INPUT
depends on BACKLIGHT_CLASS_DEVICE
depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
help
Say Y here if you want to support WMI-based hotkeys on MSI laptops.
To compile this driver as a module, choose M here: the module will
be called msi-wmi.
config XO15_EBOOK
tristate "OLPC XO-1.5 ebook switch"
depends on OLPC || COMPILE_TEST
depends on ACPI && INPUT
help
Support for the ebook switch on the OLPC XO-1.5 laptop.
This switch is triggered as the screen is rotated and folded down to
convert the device into ebook form.
config XO1_RFKILL
tristate "OLPC XO-1 software RF kill switch"
depends on OLPC || COMPILE_TEST
depends on RFKILL
help
Support for enabling/disabling the WLAN interface on the OLPC XO-1
laptop.
config PCENGINES_APU2
tristate "PC Engines APUv2/3 front button and LEDs driver"
depends on INPUT && INPUT_KEYBOARD && GPIOLIB
depends on LEDS_CLASS
select GPIO_AMD_FCH
select KEYBOARD_GPIO_POLLED
select LEDS_GPIO
help
This driver provides support for the front button and LEDs on
PC Engines APUv2/APUv3 board.
To compile this driver as a module, choose M here: the module
will be called pcengines-apuv2.
config SAMSUNG_LAPTOP
tristate "Samsung Laptop driver"
depends on RFKILL || RFKILL = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on BACKLIGHT_CLASS_DEVICE
select LEDS_CLASS
select NEW_LEDS
help
This module implements a driver for a wide range of different
Samsung laptops. It offers control over the different
function keys, wireless LED, LCD backlight level.
It may also provide some sysfs files described in
<file:Documentation/ABI/testing/sysfs-driver-samsung-laptop>
To compile this driver as a module, choose M here: the module
will be called samsung-laptop.
config SAMSUNG_Q10
tristate "Samsung Q10 Extras"
depends on ACPI
select BACKLIGHT_CLASS_DEVICE
help
This driver provides support for backlight control on Samsung Q10
and related laptops, including Dell Latitude X200.
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on ACPI
depends on ACPI_WMI
select LEDS_CLASS
select NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
depends on SERIO_I8042 || SERIO_I8042 = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL || RFKILL = n
depends on IIO
select INPUT_SPARSEKMAP
help
This driver adds support for access to certain system settings
on "legacy free" Toshiba laptops. These laptops can be recognized by
their lack of a BIOS setup menu and APM support.
On these machines, all system configuration is handled through the
ACPI. This driver is required for access to controls not covered
by the general ACPI drivers, such as LCD brightness, video output,
etc.
This driver differs from the non-ACPI Toshiba laptop driver (located
under "Processor type and features") in several aspects.
Configuration is accessed by reading and writing text files in the
/proc tree instead of by program interface to /dev. Furthermore, no
power management functions are exposed, as those are handled by the
general ACPI drivers.
More information about this driver is available at
<http://memebeam.org/toys/ToshibaAcpiDriver>.
If you have a legacy free Toshiba laptop (such as the Libretto L1
series), say Y.
config TOSHIBA_BT_RFKILL
tristate "Toshiba Bluetooth RFKill switch support"
depends on ACPI
depends on RFKILL || RFKILL = n
help
This driver adds support for Bluetooth events for the RFKill
switch on modern Toshiba laptops with full ACPI support and
an RFKill switch.
This driver handles RFKill events for the TOS6205 Bluetooth,
and re-enables it when the switch is set back to the 'on'
position.
If you have a modern Toshiba laptop with a Bluetooth and an
RFKill switch (such as the Portege R500), say Y.
config TOSHIBA_HAPS
tristate "Toshiba HDD Active Protection Sensor"
depends on ACPI
help
This driver adds support for the built-in accelerometer
found on recent Toshiba laptops equipped with HID TOS620A
device.
This driver receives ACPI notify events 0x80 when the sensor
detects a sudden move or a harsh vibration, as well as an
ACPI notify event 0x81 whenever the movement or vibration has
been stabilized.
Also provides sysfs entries to get/set the desired protection
level and resetting the HDD protection interface.
If you have a recent Toshiba laptop with a built-in accelerometer
device, say Y.
config TOSHIBA_WMI
tristate "Toshiba WMI Hotkeys Driver (EXPERIMENTAL)"
depends on ACPI_WMI
depends on INPUT
select INPUT_SPARSEKMAP
help
This driver adds hotkey monitoring support to some Toshiba models
that manage the hotkeys via WMI events.
WARNING: This driver is incomplete as it lacks a proper keymap and the
*notify function only prints the ACPI event type value. Be warned that
you will need to provide some information if you have a Toshiba model
with WMI event hotkeys and want to help with the development of this
driver.
If you have a WMI-based hotkeys Toshiba laptop, say Y or M here.
config ACPI_CMPC
tristate "CMPC Laptop Extras"
depends on ACPI && INPUT
depends on RFKILL || RFKILL=n
select BACKLIGHT_CLASS_DEVICE
help
Support for Intel Classmate PC ACPI devices, including some
keys as input device, backlight device, tablet and accelerometer
devices.
config COMPAL_LAPTOP
tristate "Compal (and others) Laptop Extras"
depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL
depends on HWMON
depends on POWER_SUPPLY
help
This is a driver for laptops built by Compal, and some models by
other brands (e.g. Dell, Toshiba).
It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon
and battery charging level control.
config LG_LAPTOP
tristate "LG Laptop Extras"
depends on ACPI
depends on ACPI_WMI
depends on INPUT
select INPUT_SPARSEKMAP
select NEW_LEDS
select LEDS_CLASS
help
This driver adds support for hotkeys as well as control of keyboard
backlight, battery maximum charge level and various other ACPI
features.
If you have an LG Gram laptop, say Y or M here.
config PANASONIC_LAPTOP
tristate "Panasonic Laptop Extras"
depends on INPUT && ACPI
depends on BACKLIGHT_CLASS_DEVICE
select INPUT_SPARSEKMAP
help
This driver adds support for access to backlight control and hotkeys
on Panasonic Let's Note laptops.
If you have a Panasonic Let's note laptop (such as the R1(N variant),
R2, R3, R5, T2, W2 and Y2 series), say Y.
config SONY_LAPTOP
tristate "Sony Laptop Extras"
depends on ACPI
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
depends on RFKILL
help
This mini-driver drives the SNC and SPIC devices present in the ACPI
BIOS of the Sony Vaio laptops.
It gives access to some extra laptop functionalities like Bluetooth,
screen brightness control, Fn keys and allows powering on/off some
devices.
Read <file:Documentation/admin-guide/laptops/sony-laptop.rst> for more information.
config SONYPI_COMPAT
bool "Sonypi compatibility"
depends on SONY_LAPTOP
help
Build the sonypi driver compatibility code into the sony-laptop driver.
config SYSTEM76_ACPI
tristate "System76 ACPI Driver"
depends on ACPI
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGERS
help
This is a driver for System76 laptops running open firmware. It adds
support for Fn-Fx key combinations, keyboard backlight, and airplane mode
LEDs.
If you have a System76 laptop running open firmware, say Y or M here.
config TOPSTAR_LAPTOP
tristate "Topstar Laptop Extras"
depends on ACPI
depends on INPUT
select INPUT_SPARSEKMAP
select LEDS_CLASS
select NEW_LEDS
help
This driver adds support for hotkeys found on Topstar laptops.
If you have a Topstar laptop, say Y or M here.
config I2C_MULTI_INSTANTIATE
tristate "I2C multi instantiate pseudo device driver"
depends on I2C && ACPI
help
Some ACPI-based systems list multiple i2c-devices in a single ACPI
firmware-node. This driver will instantiate separate i2c-clients
for each device in the firmware-node.
To compile this driver as a module, choose M here: the module
will be called i2c-multi-instantiate.
config MLX_PLATFORM
tristate "Mellanox Technologies platform support"
depends on I2C && REGMAP
help
This option enables system support for the Mellanox Technologies
platform. The Mellanox systems provide data center networking
solutions based on Virtual Protocol Interconnect (VPI) technology
enable seamless connectivity to 56/100Gb/s InfiniBand or 10/40/56GbE
connection.
If you have a Mellanox system, say Y or M here.
config TOUCHSCREEN_DMI
bool "DMI based touchscreen configuration info"
depends on ACPI && DMI && I2C=y && TOUCHSCREEN_SILEAD
select EFI_EMBEDDED_FIRMWARE if EFI
help
Certain ACPI based tablets with e.g. Silead or Chipone touchscreens
do not have enough data in ACPI tables for the touchscreen driver to
handle the touchscreen properly, as OEMs expect the data to be baked
into the tablet model specific version of the driver shipped with the
the OS-image for the device. This option supplies the missing info.
Enable this for x86 tablets with Silead or Chipone touchscreens.
config FW_ATTR_CLASS
tristate
config INTEL_IMR
bool "Intel Isolated Memory Region support"
depends on X86_INTEL_QUARK && IOSF_MBI
help
This option provides a means to manipulate Isolated Memory Regions.
IMRs are a set of registers that define read and write access masks
to prohibit certain system agents from accessing memory with 1 KiB
granularity.
IMRs make it possible to control read/write access to an address
by hardware agents inside the SoC. Read and write masks can be
defined for:
- eSRAM flush
- Dirty CPU snoop (write only)
- RMU access
- PCI Virtual Channel 0/Virtual Channel 1
- SMM mode
- Non SMM mode
Quark contains a set of eight IMR registers and makes use of those
registers during its bootup process.
If you are running on a Galileo/Quark say Y here.
config INTEL_IPS
tristate "Intel Intelligent Power Sharing"
depends on ACPI && PCI
help
Intel Calpella platforms support dynamic power sharing between the
CPU and GPU, maximizing performance in a given TDP. This driver,
along with the CPU frequency and i915 drivers, provides that
functionality. If in doubt, say Y here; it will only load on
supported platforms.
config INTEL_RST
tristate "Intel Rapid Start Technology Driver"
depends on ACPI
help
This driver provides support for modifying parameters on systems
equipped with Intel's Rapid Start Technology. When put in an ACPI
sleep state, these devices will wake after either a configured
timeout or when the system battery reaches a critical state,
automatically copying memory contents to disk. On resume, the
firmware will copy the memory contents back to RAM and resume the OS
as usual.
config INTEL_SMARTCONNECT
tristate "Intel Smart Connect disabling driver"
depends on ACPI
help
Intel Smart Connect is a technology intended to permit devices to
update state by resuming for a short period of time at regular
intervals. If a user enables this functionality under Windows and
then reboots into Linux, the system may remain configured to resume
on suspend. In the absence of any userspace to support it, the system
will then remain awake until something triggers another suspend.
This driver checks to determine whether the device has Intel Smart
Connect enabled, and if so disables it.
source "drivers/platform/x86/intel_speed_select_if/Kconfig"
config INTEL_TURBO_MAX_3
bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
depends on X86_64 && SCHED_MC_PRIO
help
This driver reads maximum performance ratio of each CPU and set up
the scheduler priority metrics. In this way scheduler can prefer
CPU with higher performance to schedule tasks.
This driver is only required when the system is not using Hardware
P-States (HWP). In HWP mode, priority can be read from ACPI tables.
config INTEL_UNCORE_FREQ_CONTROL
tristate "Intel Uncore frequency control driver"
depends on X86_64
help
This driver allows control of uncore frequency limits on
supported server platforms.
Uncore frequency controls RING/LLC (last-level cache) clocks.
To compile this driver as a module, choose M here: the module
will be called intel-uncore-frequency.
config INTEL_BXTWC_PMIC_TMU
tristate "Intel BXT Whiskey Cove TMU Driver"
depends on REGMAP
depends on MFD_INTEL_PMC_BXT
depends on INTEL_SOC_PMIC_BXTWC
help
Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature.
This driver enables the alarm wakeup functionality in the TMU unit
of Whiskey Cove PMIC.
config INTEL_CHTDC_TI_PWRBTN
tristate "Intel Cherry Trail Dollar Cove TI power button driver"
depends on INTEL_SOC_PMIC_CHTDC_TI
depends on INPUT
help
This option adds a power button driver driver for Dollar Cove TI
PMIC on Intel Cherry Trail devices.
To compile this driver as a module, choose M here: the module
will be called intel_chtdc_ti_pwrbtn.
config INTEL_MRFLD_PWRBTN
tristate "Intel Merrifield Basin Cove power button driver"
depends on INTEL_SOC_PMIC_MRFLD
depends on INPUT
help
This option adds a power button driver for Basin Cove PMIC
on Intel Merrifield devices.
To compile this driver as a module, choose M here: the module
will be called intel_mrfld_pwrbtn.
config INTEL_PMC_CORE
tristate "Intel PMC Core driver"
depends on PCI
depends on ACPI
help
The Intel Platform Controller Hub for Intel Core SoCs provides access
to Power Management Controller registers via various interfaces. This
driver can utilize debugging capabilities and supported features as
exposed by the Power Management Controller. It also may perform some
tasks in the PMC in order to enable transition into the SLPS0 state.
It should be selected on all Intel platforms supported by the driver.
Supported features:
- SLP_S0_RESIDENCY counter
- PCH IP Power Gating status
- LTR Ignore / LTR Show
- MPHY/PLL gating status (Sunrisepoint PCH only)
- SLPS0 Debug registers (Cannonlake/Icelake PCH)
- Low Power Mode registers (Tigerlake and beyond)
- PMC quirks as needed to enable SLPS0/S0ix
config INTEL_PMT_CLASS
tristate
help
The Intel Platform Monitoring Technology (PMT) class driver provides
the basic sysfs interface and file hierarchy used by PMT devices.
For more information, see:
<file:Documentation/ABI/testing/sysfs-class-intel_pmt>
To compile this driver as a module, choose M here: the module
will be called intel_pmt_class.
config INTEL_PMT_TELEMETRY
tristate "Intel Platform Monitoring Technology (PMT) Telemetry driver"
depends on MFD_INTEL_PMT
select INTEL_PMT_CLASS
help
The Intel Platform Monitory Technology (PMT) Telemetry driver provides
access to hardware telemetry metrics on devices that support the
feature.
To compile this driver as a module, choose M here: the module
will be called intel_pmt_telemetry.
config INTEL_PMT_CRASHLOG
tristate "Intel Platform Monitoring Technology (PMT) Crashlog driver"
depends on MFD_INTEL_PMT
select INTEL_PMT_CLASS
help
The Intel Platform Monitoring Technology (PMT) crashlog driver provides
access to hardware crashlog capabilities on devices that support the
feature.
To compile this driver as a module, choose M here: the module
will be called intel_pmt_crashlog.
config INTEL_PUNIT_IPC
tristate "Intel P-Unit IPC Driver"
help
This driver provides support for Intel P-Unit Mailbox IPC mechanism,
which is used to bridge the communications between kernel and P-Unit.
config INTEL_SCU_IPC
bool
config INTEL_SCU
bool
select INTEL_SCU_IPC
config INTEL_SCU_PCI
bool "Intel SCU PCI driver"
depends on PCI
select INTEL_SCU
help
This driver is used to bridge the communications between kernel
and SCU on some embedded Intel x86 platforms. It also creates
devices that are connected to the SoC through the SCU.
Platforms supported:
Medfield
Clovertrail
Merrifield
Broxton
Apollo Lake
config INTEL_SCU_PLATFORM
tristate "Intel SCU platform driver"
depends on ACPI
select INTEL_SCU
help
This driver is used to bridge the communications between kernel
and SCU (sometimes called PMC as well). The driver currently
supports Intel Elkhart Lake and compatible platforms.
config INTEL_SCU_WDT
bool
default INTEL_SCU_PCI
depends on INTEL_MID_WATCHDOG
help
This is a specific platform code to instantiate watchdog device
on ACPI-based Intel MID platforms.
config INTEL_SCU_IPC_UTIL
tristate "Intel SCU IPC utility driver"
depends on INTEL_SCU
help
The IPC Util driver provides an interface with the SCU enabling
low level access for debug work and updating the firmware. Say
N unless you will be doing this on an Intel MID platform.
config INTEL_TELEMETRY
tristate "Intel SoC Telemetry Driver"
depends on X86_64
depends on MFD_INTEL_PMC_BXT
depends on INTEL_PUNIT_IPC
help
This driver provides interfaces to configure and use
telemetry for INTEL SoC from APL onwards. It is also
used to get various SoC events and parameters
directly via debugfs files. Various tools may use
this interface for SoC state monitoring.
endif # X86_PLATFORM_DEVICES
config PMC_ATOM
def_bool y
depends on PCI
select COMMON_CLK