| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * HEART IRQ defines |
| * |
| * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de> |
| * 2014-2016 Joshua Kinard <kumba@gentoo.org> |
| * |
| */ |
| |
| #ifndef __ASM_MACH_IP30_IRQ_H |
| #define __ASM_MACH_IP30_IRQ_H |
| |
| /* |
| * HEART has 64 hardware interrupts, but use 128 to leave room for a few |
| * software interrupts as well (such as the CPU timer interrupt. |
| */ |
| #define NR_IRQS 128 |
| |
| extern void __init ip30_install_ipi(void); |
| |
| /* |
| * HEART has 64 interrupt vectors available to it, subdivided into five |
| * priority levels. They are numbered 0 to 63. |
| */ |
| #define HEART_NUM_IRQS 64 |
| |
| /* |
| * These are the five interrupt priority levels and their corresponding |
| * CPU IPx interrupt pins. |
| * |
| * Level 4 - Error Interrupts. |
| * Level 3 - HEART timer interrupt. |
| * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts. |
| * Level 1 - General device interrupts. |
| * Level 0 - General device GFX flow control interrupts. |
| */ |
| #define HEART_L4_INT_MASK 0xfff8000000000000ULL /* IP6 */ |
| #define HEART_L3_INT_MASK 0x0004000000000000ULL /* IP5 */ |
| #define HEART_L2_INT_MASK 0x0003ffff00000000ULL /* IP4 */ |
| #define HEART_L1_INT_MASK 0x00000000ffff0000ULL /* IP3 */ |
| #define HEART_L0_INT_MASK 0x000000000000ffffULL /* IP2 */ |
| |
| /* HEART L0 Interrupts (Low Priority) */ |
| #define HEART_L0_INT_GENERIC 0 |
| #define HEART_L0_INT_FLOW_CTRL_HWTR_0 1 |
| #define HEART_L0_INT_FLOW_CTRL_HWTR_1 2 |
| |
| /* HEART L2 Interrupts (High Priority) */ |
| #define HEART_L2_INT_RESCHED_CPU_0 46 |
| #define HEART_L2_INT_RESCHED_CPU_1 47 |
| #define HEART_L2_INT_CALL_CPU_0 48 |
| #define HEART_L2_INT_CALL_CPU_1 49 |
| |
| /* HEART L3 Interrupts (Compare/Counter Timer) */ |
| #define HEART_L3_INT_TIMER 50 |
| |
| /* HEART L4 Interrupts (Errors) */ |
| #define HEART_L4_INT_XWID_ERR_9 51 |
| #define HEART_L4_INT_XWID_ERR_A 52 |
| #define HEART_L4_INT_XWID_ERR_B 53 |
| #define HEART_L4_INT_XWID_ERR_C 54 |
| #define HEART_L4_INT_XWID_ERR_D 55 |
| #define HEART_L4_INT_XWID_ERR_E 56 |
| #define HEART_L4_INT_XWID_ERR_F 57 |
| #define HEART_L4_INT_XWID_ERR_XBOW 58 |
| #define HEART_L4_INT_CPU_BUS_ERR_0 59 |
| #define HEART_L4_INT_CPU_BUS_ERR_1 60 |
| #define HEART_L4_INT_CPU_BUS_ERR_2 61 |
| #define HEART_L4_INT_CPU_BUS_ERR_3 62 |
| #define HEART_L4_INT_HEART_EXCP 63 |
| |
| /* |
| * Power Switch is wired via BaseIO BRIDGE slot #6. |
| * |
| * ACFail is wired via BaseIO BRIDGE slot #7. |
| */ |
| #define IP30_POWER_IRQ HEART_L2_INT_POWER_BTN |
| |
| #include <asm/mach-generic/irq.h> |
| |
| #define IP30_HEART_L0_IRQ (MIPS_CPU_IRQ_BASE + 2) |
| #define IP30_HEART_L1_IRQ (MIPS_CPU_IRQ_BASE + 3) |
| #define IP30_HEART_L2_IRQ (MIPS_CPU_IRQ_BASE + 4) |
| #define IP30_HEART_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 5) |
| #define IP30_HEART_ERR_IRQ (MIPS_CPU_IRQ_BASE + 6) |
| |
| #endif /* __ASM_MACH_IP30_IRQ_H */ |
