blob: ff9546e95d05d880abd62d09587f3834412b77d8 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Aptina MT9V111 CMOS sensor
maintainers:
- Jacopo Mondi <jacopo@jmondi.org>
description: |
The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
The sensor has an active pixel array of 640x480 pixels and can output a number
of image resolutions and formats controllable through a simple two-wires
interface.
properties:
compatible:
const: aptina,mt9v111
reg:
maxItems: 1
clocks:
maxItems: 1
enable-gpios:
description: Enable signal, pin name "OE#". Active low.
maxItems: 1
standby-gpios:
description: |
Low power state control signal, pin name "STANDBY". Active high.
maxItems: 1
reset-gpios:
description: Chip reset signal, pin name "RESET#". Active low.
maxItems: 1
port:
type: object
description: |
Output video port. See ../video-interfaces.txt.
required:
- compatible
- reg
- clocks
- port
additionalProperties: false
examples:
- |
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
camera@48 {
compatible = "aptina,mt9v111";
reg = <0x48>;
clocks = <&camera_clk>;
port {
mt9v111_out: endpoint {
remote-endpoint = <&ceu_in>;
};
};
};
};
...