blob: bb3528315f20c324b7fd41a4aba804e0cba2987a [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (C) 2014--2020 Intel Corporation
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/mipi-ccs.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MIPI CCS, SMIA++ and SMIA compliant camera sensors
maintainers:
- Sakari Ailus <sakari.ailus@linux.intel.com>
description:
CCS (Camera Command Set) is a raw Bayer camera sensor standard defined by the
MIPI Alliance; see
<URL:https://www.mipi.org/specifications/camera-command-set>.
SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension of
that.
More detailed documentation can be found in
Documentation/devicetree/bindings/media/video-interfaces.txt .
properties:
compatible:
oneOf:
- items:
- const: mipi-ccs-1.1
- const: mipi-ccs
- items:
- const: mipi-ccs-1.0
- const: mipi-ccs
- const: nokia,smia
reg:
maxItems: 1
vana-supply:
description: Analogue voltage supply (VANA), sensor dependent.
vcore-supply:
description: Core voltage supply (VCore), sensor dependent.
vio-supply:
description: I/O voltage supply (VIO), sensor dependent.
clocks:
description: External clock to the sensor.
maxItems: 1
clock-frequency:
description: Frequency of the external clock to the sensor in Hz.
reset-gpios:
description: Reset GPIO. Also commonly called XSHUTDOWN in hardware
documentation.
maxItems: 1
flash-leds:
description: Flash LED phandles. See ../video-interfaces.txt for details.
lens-focus:
description: Lens focus controller phandles. See ../video-interfaces.txt
for details.
rotation:
description: Rotation of the sensor. See ../video-interfaces.txt for
details.
enum: [ 0, 180 ]
port:
type: object
properties:
endpoint:
type: object
properties:
link-frequencies:
$ref: /schemas/types.yaml#/definitions/uint64-array
description: List of allowed data link frequencies.
data-lanes:
minItems: 1
maxItems: 8
bus-type:
description: The type of the data bus.
oneOf:
- const: 1 # CSI-2 C-PHY
- const: 3 # CCP2
- const: 4 # CSI-2 D-PHY
required:
- link-frequencies
- data-lanes
- bus-type
required:
- compatible
- reg
- clock-frequency
- clocks
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c2 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
camera-sensor@10 {
compatible = "mipi-ccs-1.0", "mipi-ccs";
reg = <0x10>;
reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
vana-supply = <&vaux3>;
clocks = <&omap3_isp 0>;
clock-frequency = <9600000>;
port {
ccs_ep: endpoint {
data-lanes = <1 2>;
remote-endpoint = <&csi2a_ep>;
link-frequencies = /bits/ 64 <199200000 210000000
499200000>;
bus-type = <4>;
};
};
};
};
...