blob: c47b58f3e3f6e62c38371ae5c54168511c1f527d [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: The TI AM654x/J721E SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings
maintainers:
- Grygorii Strashko <grygorii.strashko@ti.com>
- Sekhar Nori <nsekhar@ti.com>
description:
The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports
(one external) and provides Ethernet packet communication for the device.
CPSW2G NUSS features - the Reduced Gigabit Media Independent Interface (RGMII),
Reduced Media Independent Interface (RMII), the Management Data
Input/Output (MDIO) interface for physical layer device (PHY) management,
new version of Common Platform Time Sync (CPTS), updated Address Lookup
Engine (ALE).
One external Ethernet port (port 1) with selectable RGMII/RMII interfaces and
an internal Communications Port Programming Interface (CPPI5) (Host port 0).
Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels
and one RX channels and operating by TI AM654x/J721E NAVSS Unified DMA
Peripheral Root Complex (UDMA-P) controller.
The CPSW2G NUSS is integrated into device MCU domain named MCU_CPSW0.
Additional features
priority level Quality Of Service (QOS) support (802.1p)
Support for Audio/Video Bridging (P802.1Qav/D6.0)
Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F)
Flow Control (802.3x) Support
Time Sensitive Network Support
IEEE P902.3br/D2.0 Interspersing Express Traffic
IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic
Configurable number of addresses plus VLANs
Configurable number of classifier/policers
VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on
ingress, Auto VLAN removal on egress and auto pad to minimum frame size.
RX/TX csum offload
Specifications can be found at
http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf
properties:
"#address-cells": true
"#size-cells": true
compatible:
oneOf:
- const: ti,am654-cpsw-nuss
- const: ti,j721e-cpsw-nuss
reg:
maxItems: 1
description:
The physical base address and size of full the CPSW2G NUSS IO range
reg-names:
items:
- const: cpsw_nuss
ranges: true
dma-coherent: true
clocks:
description: CPSW2G NUSS functional clock
clock-names:
items:
- const: fck
power-domains:
maxItems: 1
dmas:
maxItems: 9
dma-names:
items:
- const: tx0
- const: tx1
- const: tx2
- const: tx3
- const: tx4
- const: tx5
- const: tx6
- const: tx7
- const: rx
ethernet-ports:
type: object
properties:
'#address-cells':
const: 1
'#size-cells':
const: 0
patternProperties:
port@1:
type: object
description: CPSW2G NUSS external ports
$ref: ethernet-controller.yaml#
properties:
reg:
items:
- const: 1
description: CPSW port number
phys:
maxItems: 1
description: phandle on phy-gmii-sel PHY
label:
description: label associated with this port
ti,mac-only:
$ref: /schemas/types.yaml#/definitions/flag
description:
Specifies the port works in mac-only mode.
ti,syscon-efuse:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
Phandle to the system control device node which provides access
to efuse IO range with MAC addresses
required:
- reg
- phys
additionalProperties: false
patternProperties:
"^mdio@[0-9a-f]+$":
type: object
$ref: "ti,davinci-mdio.yaml#"
description:
CPSW MDIO bus.
"^cpts@[0-9a-f]+":
type: object
$ref: "ti,k3-am654-cpts.yaml#"
description:
CPSW Common Platform Time Sync (CPTS) module.
required:
- compatible
- reg
- reg-names
- ranges
- clocks
- clock-names
- power-domains
- dmas
- dma-names
- '#address-cells'
- '#size-cells'
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/k3.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
bus {
#address-cells = <2>;
#size-cells = <2>;
mcu_cpsw: ethernet@46000000 {
compatible = "ti,am654-cpsw-nuss";
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x46000000 0x0 0x200000>;
reg-names = "cpsw_nuss";
ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
dma-coherent;
clocks = <&k3_clks 5 10>;
clock-names = "fck";
power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
pinctrl-names = "default";
pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
dmas = <&mcu_udmap 0xf000>,
<&mcu_udmap 0xf001>,
<&mcu_udmap 0xf002>,
<&mcu_udmap 0xf003>,
<&mcu_udmap 0xf004>,
<&mcu_udmap 0xf005>,
<&mcu_udmap 0xf006>,
<&mcu_udmap 0xf007>,
<&mcu_udmap 0x7000>;
dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
"rx";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
cpsw_port1: port@1 {
reg = <1>;
ti,mac-only;
label = "port1";
ti,syscon-efuse = <&mcu_conf 0x200>;
phys = <&phy_gmii_sel 1>;
phy-mode = "rgmii-rxid";
phy-handle = <&phy0>;
};
};
davinci_mdio: mdio@f00 {
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
reg = <0x0 0xf00 0x0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&k3_clks 5 10>;
clock-names = "fck";
bus_freq = <1000000>;
phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
};
cpts@3d000 {
compatible = "ti,am65-cpts";
reg = <0x0 0x3d000 0x0 0x400>;
clocks = <&k3_clks 18 2>;
clock-names = "cpts";
interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cpts";
ti,cpts-ext-ts-inputs = <4>;
ti,cpts-periodic-outputs = <2>;
};
};