blob: d210843863df084b646b5f07224117c7086562fd [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/phy/phy-cadence-sierra.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Cadence Sierra PHY binding
description:
This binding describes the Cadence Sierra PHY. Sierra PHY supports multilink
multiprotocol combinations including protocols such as PCIe, USB etc.
maintainers:
- Swapnil Jakhade <sjakhade@cadence.com>
- Yuti Amonkar <yamonkar@cadence.com>
properties:
compatible:
enum:
- cdns,sierra-phy-t0
- ti,sierra-phy-t0
'#address-cells':
const: 1
'#size-cells':
const: 0
resets:
minItems: 1
maxItems: 2
items:
- description: Sierra PHY reset.
- description: Sierra APB reset. This is optional.
reset-names:
minItems: 1
maxItems: 2
items:
- const: sierra_reset
- const: sierra_apb
reg:
maxItems: 1
description:
Offset of the Sierra PHY configuration registers.
reg-names:
const: serdes
clocks:
maxItems: 2
clock-names:
items:
- const: cmn_refclk_dig_div
- const: cmn_refclk1_dig_div
cdns,autoconf:
type: boolean
description:
A boolean property whose presence indicates that the PHY registers will be
configured by hardware. If not present, all sub-node optional properties
must be provided.
patternProperties:
'^phy@[0-9a-f]$':
type: object
description:
Each group of PHY lanes with a single master lane should be represented as
a sub-node. Note that the actual configuration of each lane is determined
by hardware strapping, and must match the configuration specified here.
properties:
reg:
description:
The master lane number. This is the lowest numbered lane in the lane group.
minimum: 0
maximum: 15
resets:
minItems: 1
maxItems: 4
description:
Contains list of resets, one per lane, to get all the link lanes out of reset.
"#phy-cells":
const: 0
cdns,phy-type:
description:
Specifies the type of PHY for which the group of PHY lanes is used.
Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4]
cdns,num-lanes:
description:
Number of lanes in this group. The group is made up of consecutive lanes.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 16
required:
- reg
- resets
- "#phy-cells"
additionalProperties: false
required:
- compatible
- "#address-cells"
- "#size-cells"
- reg
- resets
- reset-names
additionalProperties: false
examples:
- |
#include <dt-bindings/phy/phy.h>
bus {
#address-cells = <2>;
#size-cells = <2>;
sierra-phy@fd240000 {
compatible = "cdns,sierra-phy-t0";
reg = <0x0 0xfd240000 0x0 0x40000>;
resets = <&phyrst 0>, <&phyrst 1>;
reset-names = "sierra_reset", "sierra_apb";
clocks = <&cmn_refclk_dig_div>, <&cmn_refclk1_dig_div>;
clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
#address-cells = <1>;
#size-cells = <0>;
pcie0_phy0: phy@0 {
reg = <0>;
resets = <&phyrst 2>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
};
pcie0_phy1: phy@2 {
reg = <2>;
resets = <&phyrst 4>;
cdns,num-lanes = <1>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
};
};
};