blob: 33974ad10afe4749a5cc961fe6cca8778fbc5090 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Qualcomm QMP USB3 DP PHY controller
maintainers:
- Manu Gautam <mgautam@codeaurora.org>
properties:
compatible:
enum:
- qcom,sc7180-qmp-usb3-dp-phy
- qcom,sc7180-qmp-usb3-phy
- qcom,sdm845-qmp-usb3-dp-phy
- qcom,sdm845-qmp-usb3-phy
reg:
items:
- description: Address and length of PHY's USB serdes block.
- description: Address and length of the DP_COM control block.
- description: Address and length of PHY's DP serdes block.
reg-names:
items:
- const: usb
- const: dp_com
- const: dp
"#clock-cells":
enum: [ 1, 2 ]
"#address-cells":
enum: [ 1, 2 ]
"#size-cells":
enum: [ 1, 2 ]
ranges: true
clocks:
items:
- description: Phy aux clock.
- description: Phy config clock.
- description: 19.2 MHz ref clk.
- description: Phy common block aux clock.
clock-names:
items:
- const: aux
- const: cfg_ahb
- const: ref
- const: com_aux
resets:
items:
- description: reset of phy block.
- description: phy common block reset.
reset-names:
items:
- const: phy
- const: common
vdda-phy-supply:
description:
Phandle to a regulator supply to PHY core block.
vdda-pll-supply:
description:
Phandle to 1.8V regulator supply to PHY refclk pll block.
vddp-ref-clk-supply:
description:
Phandle to a regulator supply to any specific refclk pll block.
#Required nodes:
patternProperties:
"^usb3-phy@[0-9a-f]+$":
type: object
description:
The USB3 PHY.
properties:
reg:
items:
- description: Address and length of TX.
- description: Address and length of RX.
- description: Address and length of PCS.
- description: Address and length of TX2.
- description: Address and length of RX2.
- description: Address and length of pcs_misc.
clocks:
items:
- description: pipe clock
clock-names:
items:
- const: pipe0
clock-output-names:
items:
- const: usb3_phy_pipe_clk_src
'#clock-cells':
const: 0
'#phy-cells':
const: 0
required:
- reg
- clocks
- clock-names
- '#clock-cells'
- '#phy-cells'
"^dp-phy@[0-9a-f]+$":
type: object
description:
The DP PHY.
properties:
reg:
items:
- description: Address and length of TX.
- description: Address and length of RX.
- description: Address and length of PCS.
- description: Address and length of TX2.
- description: Address and length of RX2.
'#clock-cells':
const: 1
'#phy-cells':
const: 0
required:
- reg
- '#clock-cells'
- '#phy-cells'
required:
- compatible
- reg
- "#clock-cells"
- "#address-cells"
- "#size-cells"
- ranges
- clocks
- clock-names
- resets
- reset-names
- vdda-phy-supply
- vdda-pll-supply
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
usb_1_qmpphy: phy-wrapper@88e9000 {
compatible = "qcom,sdm845-qmp-usb3-dp-phy";
reg = <0x088e9000 0x18c>,
<0x088e8000 0x10>,
<0x088ea000 0x40>;
reg-names = "usb", "dp_com", "dp";
#clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x088e9000 0x2000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "com_aux";
resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
<&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
vdda-phy-supply = <&vdda_usb2_ss_1p2>;
vdda-pll-supply = <&vdda_usb2_ss_core>;
usb3-phy@200 {
reg = <0x200 0x128>,
<0x400 0x200>,
<0xc00 0x218>,
<0x600 0x128>,
<0x800 0x200>,
<0xa00 0x100>;
#clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
};
dp-phy@88ea200 {
reg = <0xa200 0x200>,
<0xa400 0x200>,
<0xaa00 0x200>,
<0xa600 0x200>,
<0xa800 0x200>;
#clock-cells = <1>;
#phy-cells = <0>;
};
};