blob: 45f8e1b02241f26d8136dbecf6183671cb780e14 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
/* Copyright 2002 Andi Kleen */
#include <linux/linkage.h>
#include <asm/errno.h>
#include <asm/cpufeatures.h>
#include <asm/mcsafe_test.h>
#include <asm/alternative-asm.h>
#include <asm/export.h>
.pushsection .noinstr.text, "ax"
/*
* We build a jump to memcpy_orig by default which gets NOPped out on
* the majority of x86 CPUs which set REP_GOOD. In addition, CPUs which
* have the enhanced REP MOVSB/STOSB feature (ERMS), change those NOPs
* to a jmp to memcpy_erms which does the REP; MOVSB mem copy.
*/
.weak memcpy
/*
* memcpy - Copy a memory block.
*
* Input:
* rdi destination
* rsi source
* rdx count
*
* Output:
* rax original destination
*/
SYM_FUNC_START_ALIAS(__memcpy)
SYM_FUNC_START_LOCAL(memcpy)
ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
"jmp memcpy_erms", X86_FEATURE_ERMS
movq %rdi, %rax
movq %rdx, %rcx
shrq $3, %rcx
andl $7, %edx
rep movsq
movl %edx, %ecx
rep movsb
ret
SYM_FUNC_END(memcpy)
SYM_FUNC_END_ALIAS(__memcpy)
EXPORT_SYMBOL(memcpy)
EXPORT_SYMBOL(__memcpy)
/*
* memcpy_erms() - enhanced fast string memcpy. This is faster and
* simpler than memcpy. Use memcpy_erms when possible.
*/
SYM_FUNC_START(memcpy_erms)
movq %rdi, %rax
movq %rdx, %rcx
rep movsb
ret
SYM_FUNC_END(memcpy_erms)
SYM_FUNC_START(memcpy_orig)
movq %rdi, %rax
cmpq $0x20, %rdx
jb .Lhandle_tail
/*
* We check whether memory false dependence could occur,
* then jump to corresponding copy mode.
*/
cmp %dil, %sil
jl .Lcopy_backward
subq $0x20, %rdx
.Lcopy_forward_loop:
subq $0x20, %rdx
/*
* Move in blocks of 4x8 bytes:
*/
movq 0*8(%rsi), %r8
movq 1*8(%rsi), %r9
movq 2*8(%rsi), %r10
movq 3*8(%rsi), %r11
leaq 4*8(%rsi), %rsi
movq %r8, 0*8(%rdi)
movq %r9, 1*8(%rdi)
movq %r10, 2*8(%rdi)
movq %r11, 3*8(%rdi)
leaq 4*8(%rdi), %rdi
jae .Lcopy_forward_loop
addl $0x20, %edx
jmp .Lhandle_tail
.Lcopy_backward:
/*
* Calculate copy position to tail.
*/
addq %rdx, %rsi
addq %rdx, %rdi
subq $0x20, %rdx
/*
* At most 3 ALU operations in one cycle,
* so append NOPS in the same 16 bytes trunk.
*/
.p2align 4
.Lcopy_backward_loop:
subq $0x20, %rdx
movq -1*8(%rsi), %r8
movq -2*8(%rsi), %r9
movq -3*8(%rsi), %r10
movq -4*8(%rsi), %r11
leaq -4*8(%rsi), %rsi
movq %r8, -1*8(%rdi)
movq %r9, -2*8(%rdi)
movq %r10, -3*8(%rdi)
movq %r11, -4*8(%rdi)
leaq -4*8(%rdi), %rdi
jae .Lcopy_backward_loop
/*
* Calculate copy position to head.
*/
addl $0x20, %edx
subq %rdx, %rsi
subq %rdx, %rdi
.Lhandle_tail:
cmpl $16, %edx
jb .Lless_16bytes
/*
* Move data from 16 bytes to 31 bytes.
*/
movq 0*8(%rsi), %r8
movq 1*8(%rsi), %r9
movq -2*8(%rsi, %rdx), %r10
movq -1*8(%rsi, %rdx), %r11
movq %r8, 0*8(%rdi)
movq %r9, 1*8(%rdi)
movq %r10, -2*8(%rdi, %rdx)
movq %r11, -1*8(%rdi, %rdx)
retq
.p2align 4
.Lless_16bytes:
cmpl $8, %edx
jb .Lless_8bytes
/*
* Move data from 8 bytes to 15 bytes.
*/
movq 0*8(%rsi), %r8
movq -1*8(%rsi, %rdx), %r9
movq %r8, 0*8(%rdi)
movq %r9, -1*8(%rdi, %rdx)
retq
.p2align 4
.Lless_8bytes:
cmpl $4, %edx
jb .Lless_3bytes
/*
* Move data from 4 bytes to 7 bytes.
*/
movl (%rsi), %ecx
movl -4(%rsi, %rdx), %r8d
movl %ecx, (%rdi)
movl %r8d, -4(%rdi, %rdx)
retq
.p2align 4
.Lless_3bytes:
subl $1, %edx
jb .Lend
/*
* Move data from 1 bytes to 3 bytes.
*/
movzbl (%rsi), %ecx
jz .Lstore_1byte
movzbq 1(%rsi), %r8
movzbq (%rsi, %rdx), %r9
movb %r8b, 1(%rdi)
movb %r9b, (%rdi, %rdx)
.Lstore_1byte:
movb %cl, (%rdi)
.Lend:
retq
SYM_FUNC_END(memcpy_orig)
.popsection
#ifndef CONFIG_UML
MCSAFE_TEST_CTL
/*
* __memcpy_mcsafe - memory copy with machine check exception handling
* Note that we only catch machine checks when reading the source addresses.
* Writes to target are posted and don't generate machine checks.
*/
SYM_FUNC_START(__memcpy_mcsafe)
cmpl $8, %edx
/* Less than 8 bytes? Go to byte copy loop */
jb .L_no_whole_words
/* Check for bad alignment of source */
testl $7, %esi
/* Already aligned */
jz .L_8byte_aligned
/* Copy one byte at a time until source is 8-byte aligned */
movl %esi, %ecx
andl $7, %ecx
subl $8, %ecx
negl %ecx
subl %ecx, %edx
.L_read_leading_bytes:
movb (%rsi), %al
MCSAFE_TEST_SRC %rsi 1 .E_leading_bytes
MCSAFE_TEST_DST %rdi 1 .E_leading_bytes
.L_write_leading_bytes:
movb %al, (%rdi)
incq %rsi
incq %rdi
decl %ecx
jnz .L_read_leading_bytes
.L_8byte_aligned:
movl %edx, %ecx
andl $7, %edx
shrl $3, %ecx
jz .L_no_whole_words
.L_read_words:
movq (%rsi), %r8
MCSAFE_TEST_SRC %rsi 8 .E_read_words
MCSAFE_TEST_DST %rdi 8 .E_write_words
.L_write_words:
movq %r8, (%rdi)
addq $8, %rsi
addq $8, %rdi
decl %ecx
jnz .L_read_words
/* Any trailing bytes? */
.L_no_whole_words:
andl %edx, %edx
jz .L_done_memcpy_trap
/* Copy trailing bytes */
movl %edx, %ecx
.L_read_trailing_bytes:
movb (%rsi), %al
MCSAFE_TEST_SRC %rsi 1 .E_trailing_bytes
MCSAFE_TEST_DST %rdi 1 .E_trailing_bytes
.L_write_trailing_bytes:
movb %al, (%rdi)
incq %rsi
incq %rdi
decl %ecx
jnz .L_read_trailing_bytes
/* Copy successful. Return zero */
.L_done_memcpy_trap:
xorl %eax, %eax
.L_done:
ret
SYM_FUNC_END(__memcpy_mcsafe)
EXPORT_SYMBOL_GPL(__memcpy_mcsafe)
.section .fixup, "ax"
/*
* Return number of bytes not copied for any failure. Note that
* there is no "tail" handling since the source buffer is 8-byte
* aligned and poison is cacheline aligned.
*/
.E_read_words:
shll $3, %ecx
.E_leading_bytes:
addl %edx, %ecx
.E_trailing_bytes:
mov %ecx, %eax
jmp .L_done
/*
* For write fault handling, given the destination is unaligned,
* we handle faults on multi-byte writes with a byte-by-byte
* copy up to the write-protected page.
*/
.E_write_words:
shll $3, %ecx
addl %edx, %ecx
movl %ecx, %edx
jmp mcsafe_handle_tail
.previous
_ASM_EXTABLE_FAULT(.L_read_leading_bytes, .E_leading_bytes)
_ASM_EXTABLE_FAULT(.L_read_words, .E_read_words)
_ASM_EXTABLE_FAULT(.L_read_trailing_bytes, .E_trailing_bytes)
_ASM_EXTABLE(.L_write_leading_bytes, .E_leading_bytes)
_ASM_EXTABLE(.L_write_words, .E_write_words)
_ASM_EXTABLE(.L_write_trailing_bytes, .E_trailing_bytes)
#endif