blob: 2006ad5424fa6efdaab87a74c22e360f8fdb19da [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Andreas Färber
*/
#include <dt-bindings/clock/actions,s700-cmu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/actions,s700-reset.h>
/ {
compatible = "actions,s700";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
secmon@1f000000 {
reg = <0x0 0x1f000000 0x0 0x1000000>;
no-map;
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
hosc: hosc {
compatible = "fixed-clock";
clock-frequency = <24000000>;
#clock-cells = <0>;
};
losc: losc {
compatible = "fixed-clock";
clock-frequency = <32768>;
#clock-cells = <0>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gic: interrupt-controller@e00f1000 {
compatible = "arm,gic-400";
reg = <0x0 0xe00f1000 0x0 0x1000>,
<0x0 0xe00f2000 0x0 0x2000>,
<0x0 0xe00f4000 0x0 0x2000>,
<0x0 0xe00f6000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-controller;
#interrupt-cells = <3>;
};
uart0: serial@e0120000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0120000 0x0 0x2000>;
clocks = <&cmu CLK_UART0>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart1: serial@e0122000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0122000 0x0 0x2000>;
clocks = <&cmu CLK_UART1>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart2: serial@e0124000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0124000 0x0 0x2000>;
clocks = <&cmu CLK_UART2>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart3: serial@e0126000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0126000 0x0 0x2000>;
clocks = <&cmu CLK_UART3>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart4: serial@e0128000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0128000 0x0 0x2000>;
clocks = <&cmu CLK_UART4>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart5: serial@e012a000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012a000 0x0 0x2000>;
clocks = <&cmu CLK_UART5>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart6: serial@e012c000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012c000 0x0 0x2000>;
clocks = <&cmu CLK_UART6>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
cmu: clock-controller@e0168000 {
compatible = "actions,s700-cmu";
reg = <0x0 0xe0168000 0x0 0x1000>;
clocks = <&hosc>, <&losc>;
#clock-cells = <1>;
#reset-cells = <1>;
};
i2c0: i2c@e0170000 {
compatible = "actions,s700-i2c";
reg = <0 0xe0170000 0 0x1000>;
clocks = <&cmu CLK_I2C0>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@e0174000 {
compatible = "actions,s700-i2c";
reg = <0 0xe0174000 0 0x1000>;
clocks = <&cmu CLK_I2C1>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@e0178000 {
compatible = "actions,s700-i2c";
reg = <0 0xe0178000 0 0x1000>;
clocks = <&cmu CLK_I2C2>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@e017c000 {
compatible = "actions,s700-i2c";
reg = <0 0xe017c000 0 0x1000>;
clocks = <&cmu CLK_I2C3>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
sps: power-controller@e01b0100 {
compatible = "actions,s700-sps";
reg = <0x0 0xe01b0100 0x0 0x100>;
#power-domain-cells = <1>;
};
timer: timer@e024c000 {
compatible = "actions,s700-timer";
reg = <0x0 0xe024c000 0x0 0x4000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "timer1";
};
pinctrl: pinctrl@e01b0000 {
compatible = "actions,s700-pinctrl";
reg = <0x0 0xe01b0000 0x0 0x1000>;
clocks = <&cmu CLK_GPIO>;
gpio-controller;
gpio-ranges = <&pinctrl 0 0 136>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
};
};
};