| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for J721E SoC Family Main Domain peripherals |
| * |
| * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ |
| */ |
| |
| &cbass_main { |
| msmc_ram: sram@70000000 { |
| compatible = "mmio-sram"; |
| reg = <0x0 0x70000000 0x0 0x800000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x70000000 0x800000>; |
| |
| atf-sram@0 { |
| reg = <0x0 0x20000>; |
| }; |
| }; |
| |
| gic500: interrupt-controller@1800000 { |
| compatible = "arm,gic-v3"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ |
| <0x00 0x01900000 0x00 0x100000>; /* GICR */ |
| |
| /* vcpumntirq: virtual CPU interface maintenance interrupt */ |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| |
| gic_its: gic-its@1820000 { |
| compatible = "arm,gic-v3-its"; |
| reg = <0x00 0x01820000 0x00 0x10000>; |
| socionext,synquacer-pre-its = <0x1000000 0x400000>; |
| msi-controller; |
| #msi-cells = <1>; |
| }; |
| }; |
| |
| smmu0: smmu@36600000 { |
| compatible = "arm,smmu-v3"; |
| reg = <0x0 0x36600000 0x0 0x100000>; |
| interrupt-parent = <&gic500>; |
| interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "eventq", "gerror"; |
| #iommu-cells = <1>; |
| }; |
| |
| main_gpio_intr: interrupt-controller0 { |
| compatible = "ti,sci-intr"; |
| ti,intr-trigger-type = <1>; |
| interrupt-controller; |
| interrupt-parent = <&gic500>; |
| #interrupt-cells = <2>; |
| ti,sci = <&dmsc>; |
| ti,sci-dst-id = <14>; |
| ti,sci-rm-range-girq = <0x1>; |
| }; |
| |
| cbass_main_navss: interconnect0 { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| main_navss_intr: interrupt-controller1 { |
| compatible = "ti,sci-intr"; |
| ti,intr-trigger-type = <4>; |
| interrupt-controller; |
| interrupt-parent = <&gic500>; |
| #interrupt-cells = <2>; |
| ti,sci = <&dmsc>; |
| ti,sci-dst-id = <14>; |
| ti,sci-rm-range-girq = <0>, <2>; |
| }; |
| |
| main_udmass_inta: interrupt-controller@33d00000 { |
| compatible = "ti,sci-inta"; |
| reg = <0x0 0x33d00000 0x0 0x100000>; |
| interrupt-controller; |
| interrupt-parent = <&main_navss_intr>; |
| msi-controller; |
| ti,sci = <&dmsc>; |
| ti,sci-dev-id = <209>; |
| ti,sci-rm-range-vint = <0xa>; |
| ti,sci-rm-range-global-event = <0xd>; |
| }; |
| |
| hwspinlock: spinlock@30e00000 { |
| compatible = "ti,am654-hwspinlock"; |
| reg = <0x00 0x30e00000 0x00 0x1000>; |
| #hwlock-cells = <1>; |
| }; |
| }; |
| |
| secure_proxy_main: mailbox@32c00000 { |
| compatible = "ti,am654-secure-proxy"; |
| #mbox-cells = <1>; |
| reg-names = "target_data", "rt", "scfg"; |
| reg = <0x00 0x32c00000 0x00 0x100000>, |
| <0x00 0x32400000 0x00 0x100000>, |
| <0x00 0x32800000 0x00 0x100000>; |
| interrupt-names = "rx_011"; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| main_pmx0: pinmux@11c000 { |
| compatible = "pinctrl-single"; |
| /* Proxy 0 addressing */ |
| reg = <0x0 0x11c000 0x0 0x2b4>; |
| #pinctrl-cells = <1>; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0xffffffff>; |
| }; |
| |
| main_uart0: serial@2800000 { |
| compatible = "ti,j721e-uart", "ti,am654-uart"; |
| reg = <0x00 0x02800000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 146 0>; |
| clock-names = "fclk"; |
| }; |
| |
| main_uart1: serial@2810000 { |
| compatible = "ti,j721e-uart", "ti,am654-uart"; |
| reg = <0x00 0x02810000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 278 0>; |
| clock-names = "fclk"; |
| }; |
| |
| main_uart2: serial@2820000 { |
| compatible = "ti,j721e-uart", "ti,am654-uart"; |
| reg = <0x00 0x02820000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 279 0>; |
| clock-names = "fclk"; |
| }; |
| |
| main_uart3: serial@2830000 { |
| compatible = "ti,j721e-uart", "ti,am654-uart"; |
| reg = <0x00 0x02830000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 280 0>; |
| clock-names = "fclk"; |
| }; |
| |
| main_uart4: serial@2840000 { |
| compatible = "ti,j721e-uart", "ti,am654-uart"; |
| reg = <0x00 0x02840000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 281 0>; |
| clock-names = "fclk"; |
| }; |
| |
| main_uart5: serial@2850000 { |
| compatible = "ti,j721e-uart", "ti,am654-uart"; |
| reg = <0x00 0x02850000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 282 0>; |
| clock-names = "fclk"; |
| }; |
| |
| main_uart6: serial@2860000 { |
| compatible = "ti,j721e-uart", "ti,am654-uart"; |
| reg = <0x00 0x02860000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 283 0>; |
| clock-names = "fclk"; |
| }; |
| |
| main_uart7: serial@2870000 { |
| compatible = "ti,j721e-uart", "ti,am654-uart"; |
| reg = <0x00 0x02870000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 284 0>; |
| clock-names = "fclk"; |
| }; |
| |
| main_uart8: serial@2880000 { |
| compatible = "ti,j721e-uart", "ti,am654-uart"; |
| reg = <0x00 0x02880000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 285 0>; |
| clock-names = "fclk"; |
| }; |
| |
| main_uart9: serial@2890000 { |
| compatible = "ti,j721e-uart", "ti,am654-uart"; |
| reg = <0x00 0x02890000 0x00 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 286 0>; |
| clock-names = "fclk"; |
| }; |
| |
| main_gpio0: gpio@600000 { |
| compatible = "ti,j721e-gpio", "ti,keystone-gpio"; |
| reg = <0x0 0x00600000 0x0 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&main_gpio_intr>; |
| interrupts = <105 0>, <105 1>, <105 2>, <105 3>, |
| <105 4>, <105 5>, <105 6>, <105 7>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <128>; |
| ti,davinci-gpio-unbanked = <0>; |
| power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 105 0>; |
| clock-names = "gpio"; |
| }; |
| |
| main_gpio1: gpio@601000 { |
| compatible = "ti,j721e-gpio", "ti,keystone-gpio"; |
| reg = <0x0 0x00601000 0x0 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&main_gpio_intr>; |
| interrupts = <106 0>, <106 1>, <106 2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <36>; |
| ti,davinci-gpio-unbanked = <0>; |
| power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 106 0>; |
| clock-names = "gpio"; |
| }; |
| |
| main_gpio2: gpio@610000 { |
| compatible = "ti,j721e-gpio", "ti,keystone-gpio"; |
| reg = <0x0 0x00610000 0x0 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&main_gpio_intr>; |
| interrupts = <107 0>, <107 1>, <107 2>, <107 3>, |
| <107 4>, <107 5>, <107 6>, <107 7>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <128>; |
| ti,davinci-gpio-unbanked = <0>; |
| power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 107 0>; |
| clock-names = "gpio"; |
| }; |
| |
| main_gpio3: gpio@611000 { |
| compatible = "ti,j721e-gpio", "ti,keystone-gpio"; |
| reg = <0x0 0x00611000 0x0 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&main_gpio_intr>; |
| interrupts = <108 0>, <108 1>, <108 2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <36>; |
| ti,davinci-gpio-unbanked = <0>; |
| power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 108 0>; |
| clock-names = "gpio"; |
| }; |
| |
| main_gpio4: gpio@620000 { |
| compatible = "ti,j721e-gpio", "ti,keystone-gpio"; |
| reg = <0x0 0x00620000 0x0 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&main_gpio_intr>; |
| interrupts = <109 0>, <109 1>, <109 2>, <109 3>, |
| <109 4>, <109 5>, <109 6>, <109 7>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <128>; |
| ti,davinci-gpio-unbanked = <0>; |
| power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 109 0>; |
| clock-names = "gpio"; |
| }; |
| |
| main_gpio5: gpio@621000 { |
| compatible = "ti,j721e-gpio", "ti,keystone-gpio"; |
| reg = <0x0 0x00621000 0x0 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&main_gpio_intr>; |
| interrupts = <110 0>, <110 1>, <110 2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <36>; |
| ti,davinci-gpio-unbanked = <0>; |
| power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 110 0>; |
| clock-names = "gpio"; |
| }; |
| |
| main_gpio6: gpio@630000 { |
| compatible = "ti,j721e-gpio", "ti,keystone-gpio"; |
| reg = <0x0 0x00630000 0x0 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&main_gpio_intr>; |
| interrupts = <111 0>, <111 1>, <111 2>, <111 3>, |
| <111 4>, <111 5>, <111 6>, <111 7>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <128>; |
| ti,davinci-gpio-unbanked = <0>; |
| power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 111 0>; |
| clock-names = "gpio"; |
| }; |
| |
| main_gpio7: gpio@631000 { |
| compatible = "ti,j721e-gpio", "ti,keystone-gpio"; |
| reg = <0x0 0x00631000 0x0 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&main_gpio_intr>; |
| interrupts = <112 0>, <112 1>, <112 2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <36>; |
| ti,davinci-gpio-unbanked = <0>; |
| power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 112 0>; |
| clock-names = "gpio"; |
| }; |
| }; |
