Merge branch 'omap-for-v5.8/fixes-rc1' into fixes
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 3b177c9..2b630d3 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -335,7 +335,7 @@
<0x47400010 0x4>;
reg-names = "rev", "sysc";
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
- SYSC_OMAP2_SOFTRESET)>;
+ SYSC_OMAP4_SOFTRESET)>;
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
@@ -347,7 +347,7 @@
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x47400000 0x5000>;
+ ranges = <0x0 0x47400000 0x8000>;
usb0_phy: usb-phy@1300 {
compatible = "ti,am335x-usb-phy";
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index d692e3b..2ff9485 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -91,22 +91,6 @@
backlight = <&lcd_bl>;
- panel-timing {
- clock-frequency = <33000000>;
- hactive = <800>;
- vactive = <480>;
- hfront-porch = <210>;
- hback-porch = <16>;
- hsync-len = <30>;
- vback-porch = <10>;
- vfront-porch = <22>;
- vsync-len = <13>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 4d5a7ca..6c83812 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -134,22 +134,6 @@
enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- panel-timing {
- clock-frequency = <9000000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <2>;
- hback-porch = <2>;
- hsync-len = <41>;
- vfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 27259fd..7d4e0df 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -47,22 +47,6 @@
backlight = <&lcd_bl>;
- panel-timing {
- clock-frequency = <33000000>;
- hactive = <800>;
- vactive = <480>;
- hfront-porch = <210>;
- hback-porch = <16>;
- hsync-len = <30>;
- vback-porch = <10>;
- vfront-porch = <22>;
- vsync-len = <13>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index f89a64c..2cf6a52 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -245,26 +245,6 @@
rx-num-evt = <32>;
};
-&mailbox5 {
- status = "okay";
- mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
- status = "okay";
- };
- mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
- status = "okay";
- };
-};
-
-&mailbox6 {
- status = "okay";
- mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
- status = "okay";
- };
- mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
- status = "okay";
- };
-};
-
&pcie1_rc {
status = "okay";
};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 62ca895..0c6f266 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1207,9 +1207,8 @@
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
- clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>,
- <&timer_sys_clk_div>;
- clock-names = "fck", "timer_sys_ck";
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x36000 0x1000>;
@@ -3352,8 +3351,8 @@
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
- clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>, <&timer_sys_clk_div>;
- clock-names = "fck", "timer_sys_ck";
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x20000 0x1000>;
@@ -3361,8 +3360,8 @@
timer5: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -3379,9 +3378,8 @@
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
- clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>,
- <&timer_sys_clk_div>;
- clock-names = "fck", "timer_sys_ck";
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x22000 0x1000>;
@@ -3389,8 +3387,8 @@
timer6: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -3498,8 +3496,8 @@
timer14: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
ti,timer-pwm;
};
@@ -3526,8 +3524,8 @@
timer15: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
ti,timer-pwm;
};
@@ -3554,8 +3552,8 @@
timer16: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
ti,timer-pwm;
};
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index e39eee6..08a7d3c 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -13,8 +13,10 @@
#interrupt-cells = <2>;
#address-cells = <1>;
#size-cells = <0>;
- spi-max-frequency = <3000000>;
+ spi-max-frequency = <9600000>;
spi-cs-high;
+ spi-cpol;
+ spi-cpha;
cpcap_adc: adc {
compatible = "motorola,mapphone-cpcap-adc";
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 82706af..c630457 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3489,7 +3489,7 @@
};
static const struct omap_hwmod_reset omap_reset_quirks[] = {
- { .match = "dss", .len = 3, .reset = omap_dss_reset, },
+ { .match = "dss_core", .len = 8, .reset = omap_dss_reset, },
{ .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, },
{ .match = "i2c", .len = 3, .reset = omap_i2c_reset, },
{ .match = "wd_timer", .len = 8, .reset = omap2_wd_timer_reset, },
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 3affd18..bb54fb5 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -221,6 +221,35 @@
return sysc_read(ddata, offset);
}
+/* Poll on reset status */
+static int sysc_wait_softreset(struct sysc *ddata)
+{
+ u32 sysc_mask, syss_done, rstval;
+ int syss_offset, error = 0;
+
+ syss_offset = ddata->offsets[SYSC_SYSSTATUS];
+ sysc_mask = BIT(ddata->cap->regbits->srst_shift);
+
+ if (ddata->cfg.quirks & SYSS_QUIRK_RESETDONE_INVERTED)
+ syss_done = 0;
+ else
+ syss_done = ddata->cfg.syss_mask;
+
+ if (syss_offset >= 0) {
+ error = readx_poll_timeout(sysc_read_sysstatus, ddata, rstval,
+ (rstval & ddata->cfg.syss_mask) ==
+ syss_done,
+ 100, MAX_MODULE_SOFTRESET_WAIT);
+
+ } else if (ddata->cfg.quirks & SYSC_QUIRK_RESET_STATUS) {
+ error = readx_poll_timeout(sysc_read_sysconfig, ddata, rstval,
+ !(rstval & sysc_mask),
+ 100, MAX_MODULE_SOFTRESET_WAIT);
+ }
+
+ return error;
+}
+
static int sysc_add_named_clock_from_child(struct sysc *ddata,
const char *name,
const char *optfck_name)
@@ -925,18 +954,47 @@
struct sysc *ddata;
const struct sysc_regbits *regbits;
u32 reg, idlemodes, best_mode;
+ int error;
ddata = dev_get_drvdata(dev);
+
+ /*
+ * Some modules like DSS reset automatically on idle. Enable optional
+ * reset clocks and wait for OCP softreset to complete.
+ */
+ if (ddata->cfg.quirks & SYSC_QUIRK_OPT_CLKS_IN_RESET) {
+ error = sysc_enable_opt_clocks(ddata);
+ if (error) {
+ dev_err(ddata->dev,
+ "Optional clocks failed for enable: %i\n",
+ error);
+ return error;
+ }
+ }
+ error = sysc_wait_softreset(ddata);
+ if (error)
+ dev_warn(ddata->dev, "OCP softreset timed out\n");
+ if (ddata->cfg.quirks & SYSC_QUIRK_OPT_CLKS_IN_RESET)
+ sysc_disable_opt_clocks(ddata);
+
+ /*
+ * Some subsystem private interconnects, like DSS top level module,
+ * need only the automatic OCP softreset handling with no sysconfig
+ * register bits to configure.
+ */
if (ddata->offsets[SYSC_SYSCONFIG] == -ENODEV)
return 0;
regbits = ddata->cap->regbits;
reg = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
- /* Set CLOCKACTIVITY, we only use it for ick */
+ /*
+ * Set CLOCKACTIVITY, we only use it for ick. And we only configure it
+ * based on the SYSC_QUIRK_USE_CLOCKACT flag, not based on the hardware
+ * capabilities. See the old HWMOD_SET_DEFAULT_CLOCKACT flag.
+ */
if (regbits->clkact_shift >= 0 &&
- (ddata->cfg.quirks & SYSC_QUIRK_USE_CLOCKACT ||
- ddata->cfg.sysc_val & BIT(regbits->clkact_shift)))
+ (ddata->cfg.quirks & SYSC_QUIRK_USE_CLOCKACT))
reg |= SYSC_CLOCACT_ICK << regbits->clkact_shift;
/* Set SIDLE mode */
@@ -991,6 +1049,9 @@
sysc_write_sysconfig(ddata, reg);
}
+ /* Flush posted write */
+ sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
+
if (ddata->module_enable_quirk)
ddata->module_enable_quirk(ddata);
@@ -1071,6 +1132,9 @@
reg |= 1 << regbits->autoidle_shift;
sysc_write_sysconfig(ddata, reg);
+ /* Flush posted write */
+ sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
+
return 0;
}
@@ -1488,7 +1552,7 @@
bool lcd_en, digit_en, lcd2_en = false, lcd3_en = false;
const int lcd_en_mask = BIT(0), digit_en_mask = BIT(1);
int manager_count;
- bool framedonetv_irq;
+ bool framedonetv_irq = true;
u32 val, irq_mask = 0;
switch (sysc_soc->soc) {
@@ -1505,6 +1569,7 @@
break;
case SOC_AM4:
manager_count = 1;
+ framedonetv_irq = false;
break;
case SOC_UNKNOWN:
default:
@@ -1822,11 +1887,10 @@
*/
static int sysc_reset(struct sysc *ddata)
{
- int sysc_offset, syss_offset, sysc_val, rstval, error = 0;
- u32 sysc_mask, syss_done;
+ int sysc_offset, sysc_val, error;
+ u32 sysc_mask;
sysc_offset = ddata->offsets[SYSC_SYSCONFIG];
- syss_offset = ddata->offsets[SYSC_SYSSTATUS];
if (ddata->legacy_mode ||
ddata->cap->regbits->srst_shift < 0 ||
@@ -1835,11 +1899,6 @@
sysc_mask = BIT(ddata->cap->regbits->srst_shift);
- if (ddata->cfg.quirks & SYSS_QUIRK_RESETDONE_INVERTED)
- syss_done = 0;
- else
- syss_done = ddata->cfg.syss_mask;
-
if (ddata->pre_reset_quirk)
ddata->pre_reset_quirk(ddata);
@@ -1856,18 +1915,9 @@
if (ddata->post_reset_quirk)
ddata->post_reset_quirk(ddata);
- /* Poll on reset status */
- if (syss_offset >= 0) {
- error = readx_poll_timeout(sysc_read_sysstatus, ddata, rstval,
- (rstval & ddata->cfg.syss_mask) ==
- syss_done,
- 100, MAX_MODULE_SOFTRESET_WAIT);
-
- } else if (ddata->cfg.quirks & SYSC_QUIRK_RESET_STATUS) {
- error = readx_poll_timeout(sysc_read_sysconfig, ddata, rstval,
- !(rstval & sysc_mask),
- 100, MAX_MODULE_SOFTRESET_WAIT);
- }
+ error = sysc_wait_softreset(ddata);
+ if (error)
+ dev_warn(ddata->dev, "OCP softreset timed out\n");
if (ddata->reset_done_quirk)
ddata->reset_done_quirk(ddata);
diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index 96c6f77..c9b3f9e 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -256,10 +256,10 @@
goto exit;
/* wait for the status to be set */
- ret = readl_relaxed_poll_timeout(reset->prm->base +
- reset->prm->data->rstst,
- v, v & BIT(st_bit), 1,
- OMAP_RESET_MAX_WAIT);
+ ret = readl_relaxed_poll_timeout_atomic(reset->prm->base +
+ reset->prm->data->rstst,
+ v, v & BIT(st_bit), 1,
+ OMAP_RESET_MAX_WAIT);
if (ret)
pr_err("%s: timedout waiting for %s:%lu\n", __func__,
reset->prm->data->name, id);
