blob: 9c4f9947b194fcaf954ada858b73a41fd680ea15 [file] [log] [blame]
/*
* Copyright (c) 2006-2008 Intel Corporation
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
* Copyright (c) 2008 Red Hat Inc.
*
* DRM core CRTC related functions
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*
* Authors:
* Keith Packard
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/ctype.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/dma-fence.h>
#include <linux/uaccess.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_managed.h>
#include <drm/drm_modeset_lock.h>
#include <drm/drm_atomic.h>
#include <drm/drm_auth.h>
#include <drm/drm_debugfs_crc.h>
#include <drm/drm_drv.h>
#include <drm/drm_print.h>
#include <drm/drm_file.h>
#include "drm_crtc_internal.h"
#include "drm_internal.h"
/**
* DOC: overview
*
* A CRTC represents the overall display pipeline. It receives pixel data from
* &drm_plane and blends them together. The &drm_display_mode is also attached
* to the CRTC, specifying display timings. On the output side the data is fed
* to one or more &drm_encoder, which are then each connected to one
* &drm_connector.
*
* To create a CRTC, a KMS drivers allocates and zeroes an instances of
* &struct drm_crtc (possibly as part of a larger structure) and registers it
* with a call to drm_crtc_init_with_planes().
*
* The CRTC is also the entry point for legacy modeset operations, see
* &drm_crtc_funcs.set_config, legacy plane operations, see
* &drm_crtc_funcs.page_flip and &drm_crtc_funcs.cursor_set2, and other legacy
* operations like &drm_crtc_funcs.gamma_set. For atomic drivers all these
* features are controlled through &drm_property and
* &drm_mode_config_funcs.atomic_check.
*/
/**
* drm_crtc_from_index - find the registered CRTC at an index
* @dev: DRM device
* @idx: index of registered CRTC to find for
*
* Given a CRTC index, return the registered CRTC from DRM device's
* list of CRTCs with matching index. This is the inverse of drm_crtc_index().
* It's useful in the vblank callbacks (like &drm_driver.enable_vblank or
* &drm_driver.disable_vblank), since that still deals with indices instead
* of pointers to &struct drm_crtc."
*/
struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx)
{
struct drm_crtc *crtc;
drm_for_each_crtc(crtc, dev)
if (idx == crtc->index)
return crtc;
return NULL;
}
EXPORT_SYMBOL(drm_crtc_from_index);
int drm_crtc_force_disable(struct drm_crtc *crtc)
{
struct drm_mode_set set = {
.crtc = crtc,
};
WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev));
return drm_mode_set_config_internal(&set);
}
static unsigned int drm_num_crtcs(struct drm_device *dev)
{
unsigned int num = 0;
struct drm_crtc *tmp;
drm_for_each_crtc(tmp, dev) {
num++;
}
return num;
}
int drm_crtc_register_all(struct drm_device *dev)
{
struct drm_crtc *crtc;
int ret = 0;
drm_for_each_crtc(crtc, dev) {
drm_debugfs_crtc_add(crtc);
if (crtc->funcs->late_register)
ret = crtc->funcs->late_register(crtc);
if (ret)
return ret;
}
return 0;
}
void drm_crtc_unregister_all(struct drm_device *dev)
{
struct drm_crtc *crtc;
drm_for_each_crtc(crtc, dev) {
if (crtc->funcs->early_unregister)
crtc->funcs->early_unregister(crtc);
drm_debugfs_crtc_remove(crtc);
}
}
static int drm_crtc_crc_init(struct drm_crtc *crtc)
{
#ifdef CONFIG_DEBUG_FS
spin_lock_init(&crtc->crc.lock);
init_waitqueue_head(&crtc->crc.wq);
crtc->crc.source = kstrdup("auto", GFP_KERNEL);
if (!crtc->crc.source)
return -ENOMEM;
#endif
return 0;
}
static void drm_crtc_crc_fini(struct drm_crtc *crtc)
{
#ifdef CONFIG_DEBUG_FS
kfree(crtc->crc.source);
#endif
}
static const struct dma_fence_ops drm_crtc_fence_ops;
static struct drm_crtc *fence_to_crtc(struct dma_fence *fence)
{
BUG_ON(fence->ops != &drm_crtc_fence_ops);
return container_of(fence->lock, struct drm_crtc, fence_lock);
}
static const char *drm_crtc_fence_get_driver_name(struct dma_fence *fence)
{
struct drm_crtc *crtc = fence_to_crtc(fence);
return crtc->dev->driver->name;
}
static const char *drm_crtc_fence_get_timeline_name(struct dma_fence *fence)
{
struct drm_crtc *crtc = fence_to_crtc(fence);
return crtc->timeline_name;
}
static const struct dma_fence_ops drm_crtc_fence_ops = {
.get_driver_name = drm_crtc_fence_get_driver_name,
.get_timeline_name = drm_crtc_fence_get_timeline_name,
};
struct dma_fence *drm_crtc_create_fence(struct drm_crtc *crtc)
{
struct dma_fence *fence;
fence = kzalloc(sizeof(*fence), GFP_KERNEL);
if (!fence)
return NULL;
dma_fence_init(fence, &drm_crtc_fence_ops, &crtc->fence_lock,
crtc->fence_context, ++crtc->fence_seqno);
return fence;
}
/**
* DOC: standard CRTC properties
*
* DRM CRTCs have a few standardized properties:
*
* ACTIVE:
* Atomic property for setting the power state of the CRTC. When set to 1
* the CRTC will actively display content. When set to 0 the CRTC will be
* powered off. There is no expectation that user-space will reset CRTC
* resources like the mode and planes when setting ACTIVE to 0.
*
* User-space can rely on an ACTIVE change to 1 to never fail an atomic
* test as long as no other property has changed. If a change to ACTIVE
* fails an atomic test, this is a driver bug. For this reason setting
* ACTIVE to 0 must not release internal resources (like reserved memory
* bandwidth or clock generators).
*
* Note that the legacy DPMS property on connectors is internally routed
* to control this property for atomic drivers.
* MODE_ID:
* Atomic property for setting the CRTC display timings. The value is the
* ID of a blob containing the DRM mode info. To disable the CRTC,
* user-space must set this property to 0.
*
* Setting MODE_ID to 0 will release reserved resources for the CRTC.
* SCALING_FILTER:
* Atomic property for setting the scaling filter for CRTC scaler
*
* The value of this property can be one of the following:
*
* Default:
* Driver's default scaling filter
* Nearest Neighbor:
* Nearest Neighbor scaling filter
*/
__printf(6, 0)
static int __drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
struct drm_plane *primary,
struct drm_plane *cursor,
const struct drm_crtc_funcs *funcs,
const char *name, va_list ap)
{
struct drm_mode_config *config = &dev->mode_config;
int ret;
WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY);
WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR);
/* crtc index is used with 32bit bitmasks */
if (WARN_ON(config->num_crtc >= 32))
return -EINVAL;
WARN_ON(drm_drv_uses_atomic_modeset(dev) &&
(!funcs->atomic_destroy_state ||
!funcs->atomic_duplicate_state));
crtc->dev = dev;
crtc->funcs = funcs;
INIT_LIST_HEAD(&crtc->commit_list);
spin_lock_init(&crtc->commit_lock);
drm_modeset_lock_init(&crtc->mutex);
ret = drm_mode_object_add(dev, &crtc->base, DRM_MODE_OBJECT_CRTC);
if (ret)
return ret;
if (name) {
crtc->name = kvasprintf(GFP_KERNEL, name, ap);
} else {
crtc->name = kasprintf(GFP_KERNEL, "crtc-%d",
drm_num_crtcs(dev));
}
if (!crtc->name) {
drm_mode_object_unregister(dev, &crtc->base);
return -ENOMEM;
}
crtc->fence_context = dma_fence_context_alloc(1);
spin_lock_init(&crtc->fence_lock);
snprintf(crtc->timeline_name, sizeof(crtc->timeline_name),
"CRTC:%d-%s", crtc->base.id, crtc->name);
crtc->base.properties = &crtc->properties;
list_add_tail(&crtc->head, &config->crtc_list);
crtc->index = config->num_crtc++;
crtc->primary = primary;
crtc->cursor = cursor;
if (primary && !primary->possible_crtcs)
primary->possible_crtcs = drm_crtc_mask(crtc);
if (cursor && !cursor->possible_crtcs)
cursor->possible_crtcs = drm_crtc_mask(crtc);
ret = drm_crtc_crc_init(crtc);
if (ret) {
drm_mode_object_unregister(dev, &crtc->base);
return ret;
}
if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
drm_object_attach_property(&crtc->base, config->prop_active, 0);
drm_object_attach_property(&crtc->base, config->prop_mode_id, 0);
drm_object_attach_property(&crtc->base,
config->prop_out_fence_ptr, 0);
drm_object_attach_property(&crtc->base,
config->prop_vrr_enabled, 0);
}
return 0;
}
/**
* drm_crtc_init_with_planes - Initialise a new CRTC object with
* specified primary and cursor planes.
* @dev: DRM device
* @crtc: CRTC object to init
* @primary: Primary plane for CRTC
* @cursor: Cursor plane for CRTC
* @funcs: callbacks for the new CRTC
* @name: printf style format string for the CRTC name, or NULL for default name
*
* Inits a new object created as base part of a driver crtc object. Drivers
* should use this function instead of drm_crtc_init(), which is only provided
* for backwards compatibility with drivers which do not yet support universal
* planes). For really simple hardware which has only 1 plane look at
* drm_simple_display_pipe_init() instead.
* The &drm_crtc_funcs.destroy hook should call drm_crtc_cleanup() and kfree()
* the crtc structure. The crtc structure should not be allocated with
* devm_kzalloc().
*
* The @primary and @cursor planes are only relevant for legacy uAPI, see
* &drm_crtc.primary and &drm_crtc.cursor.
*
* Note: consider using drmm_crtc_alloc_with_planes() instead of
* drm_crtc_init_with_planes() to let the DRM managed resource infrastructure
* take care of cleanup and deallocation.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
struct drm_plane *primary,
struct drm_plane *cursor,
const struct drm_crtc_funcs *funcs,
const char *name, ...)
{
va_list ap;
int ret;
WARN_ON(!funcs->destroy);
va_start(ap, name);
ret = __drm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs,
name, ap);
va_end(ap);
return ret;
}
EXPORT_SYMBOL(drm_crtc_init_with_planes);
static void drmm_crtc_alloc_with_planes_cleanup(struct drm_device *dev,
void *ptr)
{
struct drm_crtc *crtc = ptr;
drm_crtc_cleanup(crtc);
}
void *__drmm_crtc_alloc_with_planes(struct drm_device *dev,
size_t size, size_t offset,
struct drm_plane *primary,
struct drm_plane *cursor,
const struct drm_crtc_funcs *funcs,
const char *name, ...)
{
void *container;
struct drm_crtc *crtc;
va_list ap;
int ret;
if (WARN_ON(!funcs || funcs->destroy))
return ERR_PTR(-EINVAL);
container = drmm_kzalloc(dev, size, GFP_KERNEL);
if (!container)
return ERR_PTR(-ENOMEM);
crtc = container + offset;
va_start(ap, name);
ret = __drm_crtc_init_with_planes(dev, crtc, primary, cursor, funcs,
name, ap);
va_end(ap);
if (ret)
return ERR_PTR(ret);
ret = drmm_add_action_or_reset(dev, drmm_crtc_alloc_with_planes_cleanup,
crtc);
if (ret)
return ERR_PTR(ret);
return container;
}
EXPORT_SYMBOL(__drmm_crtc_alloc_with_planes);
/**
* drm_crtc_cleanup - Clean up the core crtc usage
* @crtc: CRTC to cleanup
*
* This function cleans up @crtc and removes it from the DRM mode setting
* core. Note that the function does *not* free the crtc structure itself,
* this is the responsibility of the caller.
*/
void drm_crtc_cleanup(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
/* Note that the crtc_list is considered to be static; should we
* remove the drm_crtc at runtime we would have to decrement all
* the indices on the drm_crtc after us in the crtc_list.
*/
drm_crtc_crc_fini(crtc);
kfree(crtc->gamma_store);
crtc->gamma_store = NULL;
drm_modeset_lock_fini(&crtc->mutex);
drm_mode_object_unregister(dev, &crtc->base);
list_del(&crtc->head);
dev->mode_config.num_crtc--;
WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state);
if (crtc->state && crtc->funcs->atomic_destroy_state)
crtc->funcs->atomic_destroy_state(crtc, crtc->state);
kfree(crtc->name);
memset(crtc, 0, sizeof(*crtc));
}
EXPORT_SYMBOL(drm_crtc_cleanup);
/**
* drm_mode_getcrtc - get CRTC configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Construct a CRTC configuration structure to return to the user.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getcrtc(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_crtc *crtc_resp = data;
struct drm_crtc *crtc;
struct drm_plane *plane;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EOPNOTSUPP;
crtc = drm_crtc_find(dev, file_priv, crtc_resp->crtc_id);
if (!crtc)
return -ENOENT;
plane = crtc->primary;
crtc_resp->gamma_size = crtc->gamma_size;
drm_modeset_lock(&plane->mutex, NULL);
if (plane->state && plane->state->fb)
crtc_resp->fb_id = plane->state->fb->base.id;
else if (!plane->state && plane->fb)
crtc_resp->fb_id = plane->fb->base.id;
else
crtc_resp->fb_id = 0;
if (plane->state) {
crtc_resp->x = plane->state->src_x >> 16;
crtc_resp->y = plane->state->src_y >> 16;
}
drm_modeset_unlock(&plane->mutex);
drm_modeset_lock(&crtc->mutex, NULL);
if (crtc->state) {
if (crtc->state->enable) {
drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode);
crtc_resp->mode_valid = 1;
} else {
crtc_resp->mode_valid = 0;
}
} else {
crtc_resp->x = crtc->x;
crtc_resp->y = crtc->y;
if (crtc->enabled) {
drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode);
crtc_resp->mode_valid = 1;
} else {
crtc_resp->mode_valid = 0;
}
}
if (!file_priv->aspect_ratio_allowed)
crtc_resp->mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK;
drm_modeset_unlock(&crtc->mutex);
return 0;
}
static int __drm_mode_set_config_internal(struct drm_mode_set *set,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_crtc *crtc = set->crtc;
struct drm_framebuffer *fb;
struct drm_crtc *tmp;
int ret;
WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev));
/*
* NOTE: ->set_config can also disable other crtcs (if we steal all
* connectors from it), hence we need to refcount the fbs across all
* crtcs. Atomic modeset will have saner semantics ...
*/
drm_for_each_crtc(tmp, crtc->dev) {
struct drm_plane *plane = tmp->primary;
plane->old_fb = plane->fb;
}
fb = set->fb;
ret = crtc->funcs->set_config(set, ctx);
if (ret == 0) {
struct drm_plane *plane = crtc->primary;
plane->crtc = fb ? crtc : NULL;
plane->fb = fb;
}
drm_for_each_crtc(tmp, crtc->dev) {
struct drm_plane *plane = tmp->primary;
if (plane->fb)
drm_framebuffer_get(plane->fb);
if (plane->old_fb)
drm_framebuffer_put(plane->old_fb);
plane->old_fb = NULL;
}
return ret;
}
/**
* drm_mode_set_config_internal - helper to call &drm_mode_config_funcs.set_config
* @set: modeset config to set
*
* This is a little helper to wrap internal calls to the
* &drm_mode_config_funcs.set_config driver interface. The only thing it adds is
* correct refcounting dance.
*
* This should only be used by non-atomic legacy drivers.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_set_config_internal(struct drm_mode_set *set)
{
WARN_ON(drm_drv_uses_atomic_modeset(set->crtc->dev));
return __drm_mode_set_config_internal(set, NULL);
}
EXPORT_SYMBOL(drm_mode_set_config_internal);
/**
* drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
* CRTC viewport
* @crtc: CRTC that framebuffer will be displayed on
* @x: x panning
* @y: y panning
* @mode: mode that framebuffer will be displayed under
* @fb: framebuffer to check size of
*/
int drm_crtc_check_viewport(const struct drm_crtc *crtc,
int x, int y,
const struct drm_display_mode *mode,
const struct drm_framebuffer *fb)
{
int hdisplay, vdisplay;
drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay);
if (crtc->state &&
drm_rotation_90_or_270(crtc->primary->state->rotation))
swap(hdisplay, vdisplay);
return drm_framebuffer_check_src_coords(x << 16, y << 16,
hdisplay << 16, vdisplay << 16,
fb);
}
EXPORT_SYMBOL(drm_crtc_check_viewport);
/**
* drm_mode_setcrtc - set CRTC configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Build a new CRTC configuration based on user request.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_setcrtc(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_config *config = &dev->mode_config;
struct drm_mode_crtc *crtc_req = data;
struct drm_crtc *crtc;
struct drm_plane *plane;
struct drm_connector **connector_set = NULL, *connector;
struct drm_framebuffer *fb = NULL;
struct drm_display_mode *mode = NULL;
struct drm_mode_set set;
uint32_t __user *set_connectors_ptr;
struct drm_modeset_acquire_ctx ctx;
int ret;
int i;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EOPNOTSUPP;
/*
* Universal plane src offsets are only 16.16, prevent havoc for
* drivers using universal plane code internally.
*/
if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
return -ERANGE;
crtc = drm_crtc_find(dev, file_priv, crtc_req->crtc_id);
if (!crtc) {
DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id);
return -ENOENT;
}
DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
plane = crtc->primary;
/* allow disabling with the primary plane leased */
if (crtc_req->mode_valid && !drm_lease_held(file_priv, plane->base.id))
return -EACCES;
DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx,
DRM_MODESET_ACQUIRE_INTERRUPTIBLE, ret);
if (crtc_req->mode_valid) {
/* If we have a mode we need a framebuffer. */
/* If we pass -1, set the mode with the currently bound fb */
if (crtc_req->fb_id == -1) {
struct drm_framebuffer *old_fb;
if (plane->state)
old_fb = plane->state->fb;
else
old_fb = plane->fb;
if (!old_fb) {
DRM_DEBUG_KMS("CRTC doesn't have current FB\n");
ret = -EINVAL;
goto out;
}
fb = old_fb;
/* Make refcounting symmetric with the lookup path. */
drm_framebuffer_get(fb);
} else {
fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id);
if (!fb) {
DRM_DEBUG_KMS("Unknown FB ID%d\n",
crtc_req->fb_id);
ret = -ENOENT;
goto out;
}
}
mode = drm_mode_create(dev);
if (!mode) {
ret = -ENOMEM;
goto out;
}
if (!file_priv->aspect_ratio_allowed &&
(crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) {
DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n");
ret = -EINVAL;
goto out;
}
ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode);
if (ret) {
DRM_DEBUG_KMS("Invalid mode (ret=%d, status=%s)\n",
ret, drm_get_mode_status_name(mode->status));
drm_mode_debug_printmodeline(mode);
goto out;
}
/*
* Check whether the primary plane supports the fb pixel format.
* Drivers not implementing the universal planes API use a
* default formats list provided by the DRM core which doesn't
* match real hardware capabilities. Skip the check in that
* case.
*/
if (!plane->format_default) {
ret = drm_plane_check_pixel_format(plane,
fb->format->format,
fb->modifier);
if (ret) {
struct drm_format_name_buf format_name;
DRM_DEBUG_KMS("Invalid pixel format %s, modifier 0x%llx\n",
drm_get_format_name(fb->format->format,
&format_name),
fb->modifier);
goto out;
}
}
ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
mode, fb);
if (ret)
goto out;
}
if (crtc_req->count_connectors == 0 && mode) {
DRM_DEBUG_KMS("Count connectors is 0 but mode set\n");
ret = -EINVAL;
goto out;
}
if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n",
crtc_req->count_connectors);
ret = -EINVAL;
goto out;
}
if (crtc_req->count_connectors > 0) {
u32 out_id;
/* Avoid unbounded kernel memory allocation */
if (crtc_req->count_connectors > config->num_connector) {
ret = -EINVAL;
goto out;
}
connector_set = kmalloc_array(crtc_req->count_connectors,
sizeof(struct drm_connector *),
GFP_KERNEL);
if (!connector_set) {
ret = -ENOMEM;
goto out;
}
for (i = 0; i < crtc_req->count_connectors; i++) {
connector_set[i] = NULL;
set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;
if (get_user(out_id, &set_connectors_ptr[i])) {
ret = -EFAULT;
goto out;
}
connector = drm_connector_lookup(dev, file_priv, out_id);
if (!connector) {
DRM_DEBUG_KMS("Connector id %d unknown\n",
out_id);
ret = -ENOENT;
goto out;
}
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id,
connector->name);
connector_set[i] = connector;
}
}
set.crtc = crtc;
set.x = crtc_req->x;
set.y = crtc_req->y;
set.mode = mode;
set.connectors = connector_set;
set.num_connectors = crtc_req->count_connectors;
set.fb = fb;
if (drm_drv_uses_atomic_modeset(dev))
ret = crtc->funcs->set_config(&set, &ctx);
else
ret = __drm_mode_set_config_internal(&set, &ctx);
out:
if (fb)
drm_framebuffer_put(fb);
if (connector_set) {
for (i = 0; i < crtc_req->count_connectors; i++) {
if (connector_set[i])
drm_connector_put(connector_set[i]);
}
}
kfree(connector_set);
drm_mode_destroy(dev, mode);
/* In case we need to retry... */
connector_set = NULL;
fb = NULL;
mode = NULL;
DRM_MODESET_LOCK_ALL_END(dev, ctx, ret);
return ret;
}
int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value)
{
int ret = -EINVAL;
struct drm_crtc *crtc = obj_to_crtc(obj);
if (crtc->funcs->set_property)
ret = crtc->funcs->set_property(crtc, property, value);
if (!ret)
drm_object_property_set_value(obj, property, value);
return ret;
}
/**
* drm_crtc_create_scaling_filter_property - create a new scaling filter
* property
*
* @crtc: drm CRTC
* @supported_filters: bitmask of supported scaling filters, must include
* BIT(DRM_SCALING_FILTER_DEFAULT).
*
* This function lets driver to enable the scaling filter property on a given
* CRTC.
*
* RETURNS:
* Zero for success or -errno
*/
int drm_crtc_create_scaling_filter_property(struct drm_crtc *crtc,
unsigned int supported_filters)
{
struct drm_property *prop =
drm_create_scaling_filter_prop(crtc->dev, supported_filters);
if (IS_ERR(prop))
return PTR_ERR(prop);
drm_object_attach_property(&crtc->base, prop,
DRM_SCALING_FILTER_DEFAULT);
crtc->scaling_filter_property = prop;
return 0;
}
EXPORT_SYMBOL(drm_crtc_create_scaling_filter_property);