blob: 5512d5edc70737ad5cf174c2bf9e753128afdaae [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2011 Jonathan Cameron
*
* Buffer handling elements of industrial I/O reference driver.
* Uses the kfifo buffer.
*
* To test without hardware use the sysfs trigger.
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/bitmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/buffer.h>
#include <linux/iio/kfifo_buf.h>
#include "iio_simple_dummy.h"
/* Some fake data */
static const s16 fakedata[] = {
[DUMMY_INDEX_VOLTAGE_0] = 7,
[DUMMY_INDEX_DIFFVOLTAGE_1M2] = -33,
[DUMMY_INDEX_DIFFVOLTAGE_3M4] = -2,
[DUMMY_INDEX_ACCELX] = 344,
};
/**
* iio_simple_dummy_trigger_h() - the trigger handler function
* @irq: the interrupt number
* @p: private data - always a pointer to the poll func.
*
* This is the guts of buffered capture. On a trigger event occurring,
* if the pollfunc is attached then this handler is called as a threaded
* interrupt (and hence may sleep). It is responsible for grabbing data
* from the device and pushing it into the associated buffer.
*/
static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
int len = 0;
u16 *data;
data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
if (!data)
goto done;
if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) {
/*
* Three common options here:
* hardware scans: certain combinations of channels make
* up a fast read. The capture will consist of all of them.
* Hence we just call the grab data function and fill the
* buffer without processing.
* software scans: can be considered to be random access
* so efficient reading is just a case of minimal bus
* transactions.
* software culled hardware scans:
* occasionally a driver may process the nearest hardware
* scan to avoid storing elements that are not desired. This
* is the fiddliest option by far.
* Here let's pretend we have random access. And the values are
* in the constant table fakedata.
*/
int i, j;
for (i = 0, j = 0;
i < bitmap_weight(indio_dev->active_scan_mask,
indio_dev->masklength);
i++, j++) {
j = find_next_bit(indio_dev->active_scan_mask,
indio_dev->masklength, j);
/* random access read from the 'device' */
data[i] = fakedata[j];
len += 2;
}
}
iio_push_to_buffers_with_timestamp(indio_dev, data,
iio_get_time_ns(indio_dev));
kfree(data);
done:
/*
* Tell the core we are done with this trigger and ready for the
* next one.
*/
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static const struct iio_buffer_setup_ops iio_simple_dummy_buffer_setup_ops = {
};
int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev)
{
int ret;
struct iio_buffer *buffer;
/* Allocate a buffer to use - here a kfifo */
buffer = iio_kfifo_allocate();
if (!buffer) {
ret = -ENOMEM;
goto error_ret;
}
iio_device_attach_buffer(indio_dev, buffer);
/*
* Tell the core what device type specific functions should
* be run on either side of buffer capture enable / disable.
*/
indio_dev->setup_ops = &iio_simple_dummy_buffer_setup_ops;
/*
* Configure a polling function.
* When a trigger event with this polling function connected
* occurs, this function is run. Typically this grabs data
* from the device.
*
* NULL for the bottom half. This is normally implemented only if we
* either want to ping a capture now pin (no sleeping) or grab
* a timestamp as close as possible to a data ready trigger firing.
*
* IRQF_ONESHOT ensures irqs are masked such that only one instance
* of the handler can run at a time.
*
* "iio_simple_dummy_consumer%d" formatting string for the irq 'name'
* as seen under /proc/interrupts. Remaining parameters as per printk.
*/
indio_dev->pollfunc = iio_alloc_pollfunc(NULL,
&iio_simple_dummy_trigger_h,
IRQF_ONESHOT,
indio_dev,
"iio_simple_dummy_consumer%d",
indio_dev->id);
if (!indio_dev->pollfunc) {
ret = -ENOMEM;
goto error_free_buffer;
}
/*
* Notify the core that this device is capable of buffered capture
* driven by a trigger.
*/
indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
return 0;
error_free_buffer:
iio_kfifo_free(indio_dev->buffer);
error_ret:
return ret;
}
/**
* iio_simple_dummy_unconfigure_buffer() - release buffer resources
* @indio_dev: device instance state
*/
void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev)
{
iio_dealloc_pollfunc(indio_dev->pollfunc);
iio_kfifo_free(indio_dev->buffer);
}