| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Microsoft Surface Platform-Specific Drivers |
| # |
| |
| menuconfig SURFACE_PLATFORMS |
| bool "Microsoft Surface Platform-Specific Device Drivers" |
| depends on ACPI |
| default y |
| help |
| Say Y here to get to see options for platform-specific device drivers |
| for Microsoft Surface devices. This option alone does not add any |
| kernel code. |
| |
| If you say N, all options in this submenu will be skipped and disabled. |
| |
| if SURFACE_PLATFORMS |
| |
| config SURFACE3_WMI |
| tristate "Surface 3 WMI Driver" |
| depends on ACPI_WMI |
| depends on DMI |
| depends on INPUT |
| depends on SPI |
| help |
| Say Y here if you have a Surface 3. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called surface3-wmi. |
| |
| config SURFACE_3_BUTTON |
| tristate "Power/home/volume buttons driver for Microsoft Surface 3 tablet" |
| depends on KEYBOARD_GPIO && I2C |
| help |
| This driver handles the power/home/volume buttons on the Microsoft Surface 3 tablet. |
| |
| config SURFACE_3_POWER_OPREGION |
| tristate "Surface 3 battery platform operation region support" |
| depends on I2C |
| help |
| This driver provides support for ACPI operation |
| region of the Surface 3 battery platform driver. |
| |
| config SURFACE_ACPI_NOTIFY |
| tristate "Surface ACPI Notify Driver" |
| depends on SURFACE_AGGREGATOR |
| help |
| Surface ACPI Notify (SAN) driver for Microsoft Surface devices. |
| |
| This driver provides support for the ACPI interface (called SAN) of |
| the Surface System Aggregator Module (SSAM) EC. This interface is used |
| on 5th- and 6th-generation Microsoft Surface devices (including |
| Surface Pro 5 and 6, Surface Book 2, Surface Laptops 1 and 2, and in |
| reduced functionality on the Surface Laptop 3) to execute SSAM |
| requests directly from ACPI code, as well as receive SSAM events and |
| turn them into ACPI notifications. It essentially acts as a |
| translation layer between the SSAM controller and ACPI. |
| |
| Specifically, this driver may be needed for battery status reporting, |
| thermal sensor access, and real-time clock information, depending on |
| the Surface device in question. |
| |
| config SURFACE_AGGREGATOR_CDEV |
| tristate "Surface System Aggregator Module User-Space Interface" |
| depends on SURFACE_AGGREGATOR |
| help |
| Provides a misc-device interface to the Surface System Aggregator |
| Module (SSAM) controller. |
| |
| This option provides a module (called surface_aggregator_cdev), that, |
| when loaded, will add a client device (and its respective driver) to |
| the SSAM controller. Said client device manages a misc-device |
| interface (/dev/surface/aggregator), which can be used by user-space |
| tools to directly communicate with the SSAM EC by sending requests and |
| receiving the corresponding responses. |
| |
| The provided interface is intended for debugging and development only, |
| and should not be used otherwise. |
| |
| config SURFACE_GPE |
| tristate "Surface GPE/Lid Support Driver" |
| depends on DMI |
| help |
| This driver marks the GPEs related to the ACPI lid device found on |
| Microsoft Surface devices as wakeup sources and prepares them |
| accordingly. It is required on those devices to allow wake-ups from |
| suspend by opening the lid. |
| |
| config SURFACE_HOTPLUG |
| tristate "Surface Hot-Plug Driver" |
| depends on GPIOLIB |
| help |
| Driver for out-of-band hot-plug event signaling on Microsoft Surface |
| devices with hot-pluggable PCIe cards. |
| |
| This driver is used on Surface Book (2 and 3) devices with a |
| hot-pluggable discrete GPU (dGPU). When not in use, the dGPU on those |
| devices can enter D3cold, which prevents in-band (standard) PCIe |
| hot-plug signaling. Thus, without this driver, detaching the base |
| containing the dGPU will not correctly update the state of the |
| corresponding PCIe device if it is in D3cold. This driver adds support |
| for out-of-band hot-plug notifications, ensuring that the device state |
| is properly updated even when the device in question is in D3cold. |
| |
| Select M or Y here, if you want to (fully) support hot-plugging of |
| dGPU devices on the Surface Book 2 and/or 3 during D3cold. |
| |
| config SURFACE_PRO3_BUTTON |
| tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3/4 tablet" |
| depends on INPUT |
| help |
| This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3/4 tablet. |
| |
| source "drivers/platform/surface/aggregator/Kconfig" |
| |
| endif # SURFACE_PLATFORMS |
