| /* |
| * Allwinner A1X SoCs IRQ chip driver. |
| * |
| * Copyright (C) 2012 Maxime Ripard |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * Based on code from |
| * Allwinner Technology Co., Ltd. <www.allwinnertech.com> |
| * Benn Huang <benn@allwinnertech.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/irqchip.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| |
| #include <asm/exception.h> |
| |
| #define SUN4I_IRQ_VECTOR_REG 0x00 |
| #define SUN4I_IRQ_PROTECTION_REG 0x08 |
| #define SUN4I_IRQ_NMI_CTRL_REG 0x0c |
| #define SUN4I_IRQ_PENDING_REG(x) (0x10 + 0x4 * x) |
| #define SUN4I_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x) |
| #define SUN4I_IRQ_ENABLE_REG(data, x) ((data)->enable_reg_offset + 0x4 * x) |
| #define SUN4I_IRQ_MASK_REG(data, x) ((data)->mask_reg_offset + 0x4 * x) |
| #define SUN4I_IRQ_ENABLE_REG_OFFSET 0x40 |
| #define SUN4I_IRQ_MASK_REG_OFFSET 0x50 |
| #define SUNIV_IRQ_ENABLE_REG_OFFSET 0x20 |
| #define SUNIV_IRQ_MASK_REG_OFFSET 0x30 |
| |
| struct sun4i_irq_chip_data { |
| void __iomem *irq_base; |
| struct irq_domain *irq_domain; |
| u32 enable_reg_offset; |
| u32 mask_reg_offset; |
| }; |
| |
| static struct sun4i_irq_chip_data *irq_ic_data; |
| |
| static void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs); |
| |
| static void sun4i_irq_ack(struct irq_data *irqd) |
| { |
| unsigned int irq = irqd_to_hwirq(irqd); |
| |
| if (irq != 0) |
| return; /* Only IRQ 0 / the ENMI needs to be acked */ |
| |
| writel(BIT(0), irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(0)); |
| } |
| |
| static void sun4i_irq_mask(struct irq_data *irqd) |
| { |
| unsigned int irq = irqd_to_hwirq(irqd); |
| unsigned int irq_off = irq % 32; |
| int reg = irq / 32; |
| u32 val; |
| |
| val = readl(irq_ic_data->irq_base + |
| SUN4I_IRQ_ENABLE_REG(irq_ic_data, reg)); |
| writel(val & ~(1 << irq_off), |
| irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(irq_ic_data, reg)); |
| } |
| |
| static void sun4i_irq_unmask(struct irq_data *irqd) |
| { |
| unsigned int irq = irqd_to_hwirq(irqd); |
| unsigned int irq_off = irq % 32; |
| int reg = irq / 32; |
| u32 val; |
| |
| val = readl(irq_ic_data->irq_base + |
| SUN4I_IRQ_ENABLE_REG(irq_ic_data, reg)); |
| writel(val | (1 << irq_off), |
| irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(irq_ic_data, reg)); |
| } |
| |
| static struct irq_chip sun4i_irq_chip = { |
| .name = "sun4i_irq", |
| .irq_eoi = sun4i_irq_ack, |
| .irq_mask = sun4i_irq_mask, |
| .irq_unmask = sun4i_irq_unmask, |
| .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED, |
| }; |
| |
| static int sun4i_irq_map(struct irq_domain *d, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| irq_set_chip_and_handler(virq, &sun4i_irq_chip, handle_fasteoi_irq); |
| irq_set_probe(virq); |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops sun4i_irq_ops = { |
| .map = sun4i_irq_map, |
| .xlate = irq_domain_xlate_onecell, |
| }; |
| |
| static int __init sun4i_of_init(struct device_node *node, |
| struct device_node *parent) |
| { |
| irq_ic_data->irq_base = of_iomap(node, 0); |
| if (!irq_ic_data->irq_base) |
| panic("%pOF: unable to map IC registers\n", |
| node); |
| |
| /* Disable all interrupts */ |
| writel(0, irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(irq_ic_data, 0)); |
| writel(0, irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(irq_ic_data, 1)); |
| writel(0, irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(irq_ic_data, 2)); |
| |
| /* Unmask all the interrupts, ENABLE_REG(x) is used for masking */ |
| writel(0, irq_ic_data->irq_base + SUN4I_IRQ_MASK_REG(irq_ic_data, 0)); |
| writel(0, irq_ic_data->irq_base + SUN4I_IRQ_MASK_REG(irq_ic_data, 1)); |
| writel(0, irq_ic_data->irq_base + SUN4I_IRQ_MASK_REG(irq_ic_data, 2)); |
| |
| /* Clear all the pending interrupts */ |
| writel(0xffffffff, irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(0)); |
| writel(0xffffffff, irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(1)); |
| writel(0xffffffff, irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(2)); |
| |
| /* Enable protection mode */ |
| writel(0x01, irq_ic_data->irq_base + SUN4I_IRQ_PROTECTION_REG); |
| |
| /* Configure the external interrupt source type */ |
| writel(0x00, irq_ic_data->irq_base + SUN4I_IRQ_NMI_CTRL_REG); |
| |
| irq_ic_data->irq_domain = irq_domain_add_linear(node, 3 * 32, |
| &sun4i_irq_ops, NULL); |
| if (!irq_ic_data->irq_domain) |
| panic("%pOF: unable to create IRQ domain\n", node); |
| |
| set_handle_irq(sun4i_handle_irq); |
| |
| return 0; |
| } |
| |
| static int __init sun4i_ic_of_init(struct device_node *node, |
| struct device_node *parent) |
| { |
| irq_ic_data = kzalloc(sizeof(struct sun4i_irq_chip_data), GFP_KERNEL); |
| if (!irq_ic_data) { |
| pr_err("kzalloc failed!\n"); |
| return -ENOMEM; |
| } |
| |
| irq_ic_data->enable_reg_offset = SUN4I_IRQ_ENABLE_REG_OFFSET; |
| irq_ic_data->mask_reg_offset = SUN4I_IRQ_MASK_REG_OFFSET; |
| |
| return sun4i_of_init(node, parent); |
| } |
| |
| IRQCHIP_DECLARE(allwinner_sun4i_ic, "allwinner,sun4i-a10-ic", sun4i_ic_of_init); |
| |
| static int __init suniv_ic_of_init(struct device_node *node, |
| struct device_node *parent) |
| { |
| irq_ic_data = kzalloc(sizeof(struct sun4i_irq_chip_data), GFP_KERNEL); |
| if (!irq_ic_data) { |
| pr_err("kzalloc failed!\n"); |
| return -ENOMEM; |
| } |
| |
| irq_ic_data->enable_reg_offset = SUNIV_IRQ_ENABLE_REG_OFFSET; |
| irq_ic_data->mask_reg_offset = SUNIV_IRQ_MASK_REG_OFFSET; |
| |
| return sun4i_of_init(node, parent); |
| } |
| |
| IRQCHIP_DECLARE(allwinner_sunvi_ic, "allwinner,suniv-f1c100s-ic", |
| suniv_ic_of_init); |
| |
| static void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs) |
| { |
| u32 hwirq; |
| |
| /* |
| * hwirq == 0 can mean one of 3 things: |
| * 1) no more irqs pending |
| * 2) irq 0 pending |
| * 3) spurious irq |
| * So if we immediately get a reading of 0, check the irq-pending reg |
| * to differentiate between 2 and 3. We only do this once to avoid |
| * the extra check in the common case of 1 hapening after having |
| * read the vector-reg once. |
| */ |
| hwirq = readl(irq_ic_data->irq_base + SUN4I_IRQ_VECTOR_REG) >> 2; |
| if (hwirq == 0 && |
| !(readl(irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(0)) & |
| BIT(0))) |
| return; |
| |
| do { |
| handle_domain_irq(irq_ic_data->irq_domain, hwirq, regs); |
| hwirq = readl(irq_ic_data->irq_base + |
| SUN4I_IRQ_VECTOR_REG) >> 2; |
| } while (hwirq != 0); |
| } |