blob: 223b47ac596ec223b6da4dfecb1831ab784eab24 [file] [log] [blame]
/*
* Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "omap3-gta04.dtsi"
/ {
model = "Goldelico GTA04A5/Letux 2804";
sound {
ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
};
wlan_en: wlan_en_regulator {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&wlan_pins>;
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */
startup-delay-us = <70000>;
enable-active-high;
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pps_pins>;
gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
};
};
&gpio5 {
irda_en {
gpio-hog;
gpios = <(175-160) GPIO_ACTIVE_HIGH>;
output-high; /* activate gpio_175 to disable IrDA receiver */
};
};
&omap3_pmx_core {
bt_pins: pinmux_bt_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */
>;
};
wlan_pins: pinmux_wlan_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */
>;
};
wlan_irq_pin: pinmux_wlan_irq_pin {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */
>;
};
irda_pins: pinmux_irda {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */
>;
};
pps_pins: pinmux_pps_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
>;
};
};
/*
* for WL183x module see
* Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
*/
&wifi_pwrseq {
/delete-property/ reset-gpios;
};
&mmc2 {
vmmc-supply = <&wlan_en>;
bus-width = <4>;
cap-power-off-card;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&wlan_irq_pin>;
#address-cells = <1>;
#size-cells = <0>;
/delete-property/ mmc-pwrseq;
wlcore: wlcore@2 {
compatible = "ti,wl1837";
reg = <2>;
interrupt-parent = <&gpio5>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */
ref-clock-frequency = <26000000>;
};
};
&i2c2 {
/delete-node/ bmp085@77;
/delete-node/ bma180@41;
/delete-node/ itg3200@68;
/delete-node/ hmc5843@1e;
bmg160@69 {
compatible = "bosch,bmg160";
reg = <0x69>;
};
bmc150@10 {
compatible = "bosch,bmc150_accel";
reg = <0x10>;
};
bmc150@12 {
compatible = "bosch,bmc150_magn";
reg = <0x12>;
};
bme280@76 {
compatible = "bosch,bme280";
reg = <0x76>;
};
};