blob: 4ee6d51d8d1ecbe2b4173e66cca524e19860a364 [file] [log] [blame]
/*
* Copyright (C) 2016 STMicroelectronics (R&D) Limited.
* Author: Patrice Chotard <patrice.chotard@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "stih410.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "STiH410 B2260";
compatible = "st,stih410-b2260", "st,stih410";
chosen {
bootargs = "clk_ignore_unused";
stdout-path = &uart1;
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
aliases {
serial1 = &uart1;
ethernet0 = &ethernet0;
};
leds {
compatible = "gpio-leds";
user_green_1 {
label = "User_green_1";
gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
user_green_2 {
label = "User_green_2";
gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
user_green_3 {
label = "User_green_3";
gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
user_green_4 {
label = "User_green_4";
gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "STI-B2260";
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
simple-audio-card,dai-link@0 {
reg = <0>;
/* DAC */
format = "i2s";
mclk-fs = <128>;
cpu {
sound-dai = <&sti_uni_player0>;
};
codec {
sound-dai = <&sti_hdmi>;
};
};
};
soc {
/* Low speed expansion connector */
uart0: serial@9830000 {
label = "LS-UART0";
pinctrl-names = "default", "no-hw-flowctrl";
pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
pinctrl-1 = <&pinctrl_serial0>;
rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay";
};
/* Low speed expansion connector */
uart1: serial@9831000 {
label = "LS-UART1";
status = "okay";
};
/* Low speed expansion connector */
spi0: spi@9844000 {
label = "LS-SPI0";
cs-gpios = <&pio30 3 0>;
status = "okay";
};
/* Low speed expansion connector */
i2c0: i2c@9840000 {
label = "LS-I2C0";
status = "okay";
};
/* Low speed expansion connector */
i2c1: i2c@9841000 {
label = "LS-I2C1";
status = "okay";
};
/* high speed expansion connector */
i2c2: i2c@9842000 {
label = "HS-I2C2";
pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
status = "okay";
};
/* high speed expansion connector */
i2c3: i2c@9843000 {
label = "HS-I2C3";
pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
status = "okay";
};
mmc0: sdhci@9060000 {
pinctrl-0 = <&pinctrl_sd0>;
bus-width = <4>;
status = "okay";
};
/* high speed expansion connector */
mmc1: sdhci@9080000 {
status = "okay";
};
pwm0: pwm@9810000 {
status = "okay";
};
pwm1: pwm@9510000 {
status = "okay";
};
usb2_picophy1: phy2@0 {
status = "okay";
};
usb2_picophy2: phy3@0 {
status = "okay";
};
ohci0: usb@9a03c00 {
status = "okay";
};
ehci0: usb@9a03e00 {
status = "okay";
};
ohci1: usb@9a83c00 {
status = "okay";
};
ehci1: usb@9a83e00 {
status = "okay";
};
st_dwc3: dwc3@8f94000 {
status = "okay";
};
ethernet0: dwmac@9630000 {
phy-mode = "rgmii";
pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
snps,phy-bus-name = "stmmac";
snps,phy-bus-id = <0>;
snps,phy-addr = <0>;
snps,reset-gpio = <&pio0 7 0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
};
sti_uni_player0: sti-uni-player@8d80000 {
status = "okay";
};
/* SSC11 to HDMI */
hdmiddc: i2c@9541000 {
/* HDMI V1.3a supports Standard mode only */
clock-frequency = <100000>;
st,i2c-min-scl-pulse-width-us = <0>;
st,i2c-min-sda-pulse-width-us = <5>;
status = "okay";
};
miphy28lp_phy: miphy28lp@0 {
phy_port1: port@9b2a000 {
st,osc-force-ext;
};
};
sata1: sata@9b28000 {
status = "okay";
};
};
};