blob: dbf8bda71ff75c43e5932278ae4311403c51fa2e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Firmware loading.
*
* Copyright (c) 2017-2019, Silicon Laboratories, Inc.
* Copyright (c) 2010, ST-Ericsson
*/
#include <linux/firmware.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/bitfield.h>
#include "fwio.h"
#include "wfx.h"
#include "hwio.h"
// Addresses below are in SRAM area
#define WFX_DNLD_FIFO 0x09004000
#define DNLD_BLOCK_SIZE 0x0400
#define DNLD_FIFO_SIZE 0x8000 // (32 * DNLD_BLOCK_SIZE)
// Download Control Area (DCA)
#define WFX_DCA_IMAGE_SIZE 0x0900C000
#define WFX_DCA_PUT 0x0900C004
#define WFX_DCA_GET 0x0900C008
#define WFX_DCA_HOST_STATUS 0x0900C00C
#define HOST_READY 0x87654321
#define HOST_INFO_READ 0xA753BD99
#define HOST_UPLOAD_PENDING 0xABCDDCBA
#define HOST_UPLOAD_COMPLETE 0xD4C64A99
#define HOST_OK_TO_JUMP 0x174FC882
#define WFX_DCA_NCP_STATUS 0x0900C010
#define NCP_NOT_READY 0x12345678
#define NCP_READY 0x87654321
#define NCP_INFO_READY 0xBD53EF99
#define NCP_DOWNLOAD_PENDING 0xABCDDCBA
#define NCP_DOWNLOAD_COMPLETE 0xCAFEFECA
#define NCP_AUTH_OK 0xD4C64A99
#define NCP_AUTH_FAIL 0x174FC882
#define NCP_PUB_KEY_RDY 0x7AB41D19
#define WFX_DCA_FW_SIGNATURE 0x0900C014
#define FW_SIGNATURE_SIZE 0x40
#define WFX_DCA_FW_HASH 0x0900C054
#define FW_HASH_SIZE 0x08
#define WFX_DCA_FW_VERSION 0x0900C05C
#define FW_VERSION_SIZE 0x04
#define WFX_DCA_RESERVED 0x0900C060
#define DCA_RESERVED_SIZE 0x20
#define WFX_STATUS_INFO 0x0900C080
#define WFX_BOOTLOADER_LABEL 0x0900C084
#define BOOTLOADER_LABEL_SIZE 0x3C
#define WFX_PTE_INFO 0x0900C0C0
#define PTE_INFO_KEYSET_IDX 0x0D
#define PTE_INFO_SIZE 0x10
#define WFX_ERR_INFO 0x0900C0D0
#define ERR_INVALID_SEC_TYPE 0x05
#define ERR_SIG_VERIF_FAILED 0x0F
#define ERR_AES_CTRL_KEY 0x10
#define ERR_ECC_PUB_KEY 0x11
#define ERR_MAC_KEY 0x18
#define DCA_TIMEOUT 50 // milliseconds
#define WAKEUP_TIMEOUT 200 // milliseconds
static const char * const fwio_error_strings[] = {
[ERR_INVALID_SEC_TYPE] = "Invalid section type or wrong encryption",
[ERR_SIG_VERIF_FAILED] = "Signature verification failed",
[ERR_AES_CTRL_KEY] = "AES control key not initialized",
[ERR_ECC_PUB_KEY] = "ECC public key not initialized",
[ERR_MAC_KEY] = "MAC key not initialized",
};
/*
* request_firmware() allocate data using vmalloc(). It is not compatible with
* underlying hardware that use DMA. Function below detect this case and
* allocate a bounce buffer if necessary.
*
* Notice that, in doubt, you can enable CONFIG_DEBUG_SG to ask kernel to
* detect this problem at runtime (else, kernel silently fail).
*
* NOTE: it may also be possible to use 'pages' from struct firmware and avoid
* bounce buffer
*/
static int sram_write_dma_safe(struct wfx_dev *wdev, u32 addr, const u8 *buf,
size_t len)
{
int ret;
const u8 *tmp;
if (!virt_addr_valid(buf)) {
tmp = kmemdup(buf, len, GFP_KERNEL);
if (!tmp)
return -ENOMEM;
} else {
tmp = buf;
}
ret = sram_buf_write(wdev, addr, tmp, len);
if (!virt_addr_valid(buf))
kfree(tmp);
return ret;
}
int get_firmware(struct wfx_dev *wdev, u32 keyset_chip,
const struct firmware **fw, int *file_offset)
{
int keyset_file;
char filename[256];
const char *data;
int ret;
snprintf(filename, sizeof(filename), "%s_%02X.sec", wdev->pdata.file_fw,
keyset_chip);
ret = firmware_request_nowarn(fw, filename, wdev->dev);
if (ret) {
dev_info(wdev->dev, "can't load %s, falling back to %s.sec\n",
filename, wdev->pdata.file_fw);
snprintf(filename, sizeof(filename), "%s.sec",
wdev->pdata.file_fw);
ret = request_firmware(fw, filename, wdev->dev);
if (ret) {
dev_err(wdev->dev, "can't load %s\n", filename);
*fw = NULL;
return ret;
}
}
data = (*fw)->data;
if (memcmp(data, "KEYSET", 6) != 0) {
// Legacy firmware format
*file_offset = 0;
keyset_file = 0x90;
} else {
*file_offset = 8;
keyset_file = (hex_to_bin(data[6]) * 16) | hex_to_bin(data[7]);
if (keyset_file < 0) {
dev_err(wdev->dev, "%s corrupted\n", filename);
release_firmware(*fw);
*fw = NULL;
return -EINVAL;
}
}
if (keyset_file != keyset_chip) {
dev_err(wdev->dev, "firmware keyset is incompatible with chip (file: 0x%02X, chip: 0x%02X)\n",
keyset_file, keyset_chip);
release_firmware(*fw);
*fw = NULL;
return -ENODEV;
}
wdev->keyset = keyset_file;
return 0;
}
static int wait_ncp_status(struct wfx_dev *wdev, u32 status)
{
ktime_t now, start;
u32 reg;
int ret;
start = ktime_get();
for (;;) {
ret = sram_reg_read(wdev, WFX_DCA_NCP_STATUS, &reg);
if (ret < 0)
return -EIO;
now = ktime_get();
if (reg == status)
break;
if (ktime_after(now, ktime_add_ms(start, DCA_TIMEOUT)))
return -ETIMEDOUT;
}
if (ktime_compare(now, start))
dev_dbg(wdev->dev, "chip answer after %lldus\n",
ktime_us_delta(now, start));
else
dev_dbg(wdev->dev, "chip answer immediately\n");
return 0;
}
static int upload_firmware(struct wfx_dev *wdev, const u8 *data, size_t len)
{
int ret;
u32 offs, bytes_done;
ktime_t now, start;
if (len % DNLD_BLOCK_SIZE) {
dev_err(wdev->dev, "firmware size is not aligned. Buffer overrun will occur\n");
return -EIO;
}
offs = 0;
while (offs < len) {
start = ktime_get();
for (;;) {
ret = sram_reg_read(wdev, WFX_DCA_GET, &bytes_done);
if (ret < 0)
return ret;
now = ktime_get();
if (offs +
DNLD_BLOCK_SIZE - bytes_done < DNLD_FIFO_SIZE)
break;
if (ktime_after(now, ktime_add_ms(start, DCA_TIMEOUT)))
return -ETIMEDOUT;
}
if (ktime_compare(now, start))
dev_dbg(wdev->dev, "answer after %lldus\n",
ktime_us_delta(now, start));
ret = sram_write_dma_safe(wdev, WFX_DNLD_FIFO +
(offs % DNLD_FIFO_SIZE),
data + offs, DNLD_BLOCK_SIZE);
if (ret < 0)
return ret;
// WFx seems to not support writing 0 in this register during
// first loop
offs += DNLD_BLOCK_SIZE;
ret = sram_reg_write(wdev, WFX_DCA_PUT, offs);
if (ret < 0)
return ret;
}
return 0;
}
static void print_boot_status(struct wfx_dev *wdev)
{
u32 val32;
sram_reg_read(wdev, WFX_STATUS_INFO, &val32);
if (val32 == 0x12345678) {
dev_info(wdev->dev, "no error reported by secure boot\n");
} else {
sram_reg_read(wdev, WFX_ERR_INFO, &val32);
if (val32 < ARRAY_SIZE(fwio_error_strings) &&
fwio_error_strings[val32])
dev_info(wdev->dev, "secure boot error: %s\n",
fwio_error_strings[val32]);
else
dev_info(wdev->dev,
"secure boot error: Unknown (0x%02x)\n",
val32);
}
}
static int load_firmware_secure(struct wfx_dev *wdev)
{
const struct firmware *fw = NULL;
int header_size;
int fw_offset;
ktime_t start;
u8 *buf;
int ret;
BUILD_BUG_ON(PTE_INFO_SIZE > BOOTLOADER_LABEL_SIZE);
buf = kmalloc(BOOTLOADER_LABEL_SIZE + 1, GFP_KERNEL);
if (!buf)
return -ENOMEM;
sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_READY);
ret = wait_ncp_status(wdev, NCP_INFO_READY);
if (ret)
goto error;
sram_buf_read(wdev, WFX_BOOTLOADER_LABEL, buf, BOOTLOADER_LABEL_SIZE);
buf[BOOTLOADER_LABEL_SIZE] = 0;
dev_dbg(wdev->dev, "bootloader: \"%s\"\n", buf);
sram_buf_read(wdev, WFX_PTE_INFO, buf, PTE_INFO_SIZE);
ret = get_firmware(wdev, buf[PTE_INFO_KEYSET_IDX], &fw, &fw_offset);
if (ret)
goto error;
header_size = fw_offset + FW_SIGNATURE_SIZE + FW_HASH_SIZE;
sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_INFO_READ);
ret = wait_ncp_status(wdev, NCP_READY);
if (ret)
goto error;
sram_reg_write(wdev, WFX_DNLD_FIFO, 0xFFFFFFFF); // Fifo init
sram_write_dma_safe(wdev, WFX_DCA_FW_VERSION, "\x01\x00\x00\x00",
FW_VERSION_SIZE);
sram_write_dma_safe(wdev, WFX_DCA_FW_SIGNATURE, fw->data + fw_offset,
FW_SIGNATURE_SIZE);
sram_write_dma_safe(wdev, WFX_DCA_FW_HASH,
fw->data + fw_offset + FW_SIGNATURE_SIZE,
FW_HASH_SIZE);
sram_reg_write(wdev, WFX_DCA_IMAGE_SIZE, fw->size - header_size);
sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_UPLOAD_PENDING);
ret = wait_ncp_status(wdev, NCP_DOWNLOAD_PENDING);
if (ret)
goto error;
start = ktime_get();
ret = upload_firmware(wdev, fw->data + header_size,
fw->size - header_size);
if (ret)
goto error;
dev_dbg(wdev->dev, "firmware load after %lldus\n",
ktime_us_delta(ktime_get(), start));
sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_UPLOAD_COMPLETE);
ret = wait_ncp_status(wdev, NCP_AUTH_OK);
// Legacy ROM support
if (ret < 0)
ret = wait_ncp_status(wdev, NCP_PUB_KEY_RDY);
if (ret < 0)
goto error;
sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_OK_TO_JUMP);
error:
kfree(buf);
if (fw)
release_firmware(fw);
if (ret)
print_boot_status(wdev);
return ret;
}
static int init_gpr(struct wfx_dev *wdev)
{
int ret, i;
static const struct {
int index;
u32 value;
} gpr_init[] = {
{ 0x07, 0x208775 },
{ 0x08, 0x2EC020 },
{ 0x09, 0x3C3C3C },
{ 0x0B, 0x322C44 },
{ 0x0C, 0xA06497 },
};
for (i = 0; i < ARRAY_SIZE(gpr_init); i++) {
ret = igpr_reg_write(wdev, gpr_init[i].index,
gpr_init[i].value);
if (ret < 0)
return ret;
dev_dbg(wdev->dev, " index %02x: %08x\n", gpr_init[i].index,
gpr_init[i].value);
}
return 0;
}
int wfx_init_device(struct wfx_dev *wdev)
{
int ret;
int hw_revision, hw_type;
int wakeup_timeout = 50; // ms
ktime_t now, start;
u32 reg;
reg = CFG_DIRECT_ACCESS_MODE | CFG_CPU_RESET | CFG_WORD_MODE2;
if (wdev->pdata.use_rising_clk)
reg |= CFG_CLK_RISE_EDGE;
ret = config_reg_write(wdev, reg);
if (ret < 0) {
dev_err(wdev->dev, "bus returned an error during first write access. Host configuration error?\n");
return -EIO;
}
ret = config_reg_read(wdev, &reg);
if (ret < 0) {
dev_err(wdev->dev, "bus returned an error during first read access. Bus configuration error?\n");
return -EIO;
}
if (reg == 0 || reg == ~0) {
dev_err(wdev->dev, "chip mute. Bus configuration error or chip wasn't reset?\n");
return -EIO;
}
dev_dbg(wdev->dev, "initial config register value: %08x\n", reg);
hw_revision = FIELD_GET(CFG_DEVICE_ID_MAJOR, reg);
if (hw_revision == 0 || hw_revision > 2) {
dev_err(wdev->dev, "bad hardware revision number: %d\n",
hw_revision);
return -ENODEV;
}
hw_type = FIELD_GET(CFG_DEVICE_ID_TYPE, reg);
if (hw_type == 1) {
dev_notice(wdev->dev, "development hardware detected\n");
wakeup_timeout = 2000;
}
ret = init_gpr(wdev);
if (ret < 0)
return ret;
ret = control_reg_write(wdev, CTRL_WLAN_WAKEUP);
if (ret < 0)
return -EIO;
start = ktime_get();
for (;;) {
ret = control_reg_read(wdev, &reg);
now = ktime_get();
if (reg & CTRL_WLAN_READY)
break;
if (ktime_after(now, ktime_add_ms(start, wakeup_timeout))) {
dev_err(wdev->dev, "chip didn't wake up. Chip wasn't reset?\n");
return -ETIMEDOUT;
}
}
dev_dbg(wdev->dev, "chip wake up after %lldus\n",
ktime_us_delta(now, start));
ret = config_reg_write_bits(wdev, CFG_CPU_RESET, 0);
if (ret < 0)
return ret;
ret = load_firmware_secure(wdev);
if (ret < 0)
return ret;
ret = config_reg_write_bits(wdev,
CFG_DIRECT_ACCESS_MODE |
CFG_IRQ_ENABLE_DATA |
CFG_IRQ_ENABLE_WRDY,
CFG_IRQ_ENABLE_DATA);
return ret;
}