| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Driver for Intel(R) 10nm server memory controller. |
| * Copyright (c) 2019, Intel Corporation. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <asm/cpu_device_id.h> |
| #include <asm/intel-family.h> |
| #include <asm/mce.h> |
| #include "edac_module.h" |
| #include "skx_common.h" |
| |
| #define I10NM_REVISION "v0.0.3" |
| #define EDAC_MOD_STR "i10nm_edac" |
| |
| /* Debug macros */ |
| #define i10nm_printk(level, fmt, arg...) \ |
| edac_printk(level, "i10nm", fmt, ##arg) |
| |
| #define I10NM_GET_SCK_BAR(d, reg) \ |
| pci_read_config_dword((d)->uracu, 0xd0, &(reg)) |
| #define I10NM_GET_IMC_BAR(d, i, reg) \ |
| pci_read_config_dword((d)->uracu, 0xd8 + (i) * 4, &(reg)) |
| #define I10NM_GET_DIMMMTR(m, i, j) \ |
| (*(u32 *)((m)->mbase + 0x2080c + (i) * 0x4000 + (j) * 4)) |
| #define I10NM_GET_MCDDRTCFG(m, i, j) \ |
| (*(u32 *)((m)->mbase + 0x20970 + (i) * 0x4000 + (j) * 4)) |
| |
| #define I10NM_GET_SCK_MMIO_BASE(reg) (GET_BITFIELD(reg, 0, 28) << 23) |
| #define I10NM_GET_IMC_MMIO_OFFSET(reg) (GET_BITFIELD(reg, 0, 10) << 12) |
| #define I10NM_GET_IMC_MMIO_SIZE(reg) ((GET_BITFIELD(reg, 13, 23) - \ |
| GET_BITFIELD(reg, 0, 10) + 1) << 12) |
| |
| static struct list_head *i10nm_edac_list; |
| |
| static struct pci_dev *pci_get_dev_wrapper(int dom, unsigned int bus, |
| unsigned int dev, unsigned int fun) |
| { |
| struct pci_dev *pdev; |
| |
| pdev = pci_get_domain_bus_and_slot(dom, bus, PCI_DEVFN(dev, fun)); |
| if (!pdev) { |
| edac_dbg(2, "No device %02x:%02x.%x\n", |
| bus, dev, fun); |
| return NULL; |
| } |
| |
| if (unlikely(pci_enable_device(pdev) < 0)) { |
| edac_dbg(2, "Failed to enable device %02x:%02x.%x\n", |
| bus, dev, fun); |
| return NULL; |
| } |
| |
| pci_dev_get(pdev); |
| |
| return pdev; |
| } |
| |
| static int i10nm_get_all_munits(void) |
| { |
| struct pci_dev *mdev; |
| void __iomem *mbase; |
| unsigned long size; |
| struct skx_dev *d; |
| int i, j = 0; |
| u32 reg, off; |
| u64 base; |
| |
| list_for_each_entry(d, i10nm_edac_list, list) { |
| d->util_all = pci_get_dev_wrapper(d->seg, d->bus[1], 29, 1); |
| if (!d->util_all) |
| return -ENODEV; |
| |
| d->uracu = pci_get_dev_wrapper(d->seg, d->bus[0], 0, 1); |
| if (!d->uracu) |
| return -ENODEV; |
| |
| if (I10NM_GET_SCK_BAR(d, reg)) { |
| i10nm_printk(KERN_ERR, "Failed to socket bar\n"); |
| return -ENODEV; |
| } |
| |
| base = I10NM_GET_SCK_MMIO_BASE(reg); |
| edac_dbg(2, "socket%d mmio base 0x%llx (reg 0x%x)\n", |
| j++, base, reg); |
| |
| for (i = 0; i < I10NM_NUM_IMC; i++) { |
| mdev = pci_get_dev_wrapper(d->seg, d->bus[0], |
| 12 + i, 0); |
| if (i == 0 && !mdev) { |
| i10nm_printk(KERN_ERR, "No IMC found\n"); |
| return -ENODEV; |
| } |
| if (!mdev) |
| continue; |
| |
| d->imc[i].mdev = mdev; |
| |
| if (I10NM_GET_IMC_BAR(d, i, reg)) { |
| i10nm_printk(KERN_ERR, "Failed to get mc bar\n"); |
| return -ENODEV; |
| } |
| |
| off = I10NM_GET_IMC_MMIO_OFFSET(reg); |
| size = I10NM_GET_IMC_MMIO_SIZE(reg); |
| edac_dbg(2, "mc%d mmio base 0x%llx size 0x%lx (reg 0x%x)\n", |
| i, base + off, size, reg); |
| |
| mbase = ioremap(base + off, size); |
| if (!mbase) { |
| i10nm_printk(KERN_ERR, "Failed to ioremap 0x%llx\n", |
| base + off); |
| return -ENODEV; |
| } |
| |
| d->imc[i].mbase = mbase; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct x86_cpu_id i10nm_cpuids[] = { |
| { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_TREMONT_D, 0, 0 }, |
| { X86_VENDOR_INTEL, 6, INTEL_FAM6_ICELAKE_X, 0, 0 }, |
| { X86_VENDOR_INTEL, 6, INTEL_FAM6_ICELAKE_D, 0, 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(x86cpu, i10nm_cpuids); |
| |
| static bool i10nm_check_ecc(struct skx_imc *imc, int chan) |
| { |
| u32 mcmtr; |
| |
| mcmtr = *(u32 *)(imc->mbase + 0x20ef8 + chan * 0x4000); |
| edac_dbg(1, "ch%d mcmtr reg %x\n", chan, mcmtr); |
| |
| return !!GET_BITFIELD(mcmtr, 2, 2); |
| } |
| |
| static int i10nm_get_dimm_config(struct mem_ctl_info *mci) |
| { |
| struct skx_pvt *pvt = mci->pvt_info; |
| struct skx_imc *imc = pvt->imc; |
| struct dimm_info *dimm; |
| u32 mtr, mcddrtcfg; |
| int i, j, ndimms; |
| |
| for (i = 0; i < I10NM_NUM_CHANNELS; i++) { |
| if (!imc->mbase) |
| continue; |
| |
| ndimms = 0; |
| for (j = 0; j < I10NM_NUM_DIMMS; j++) { |
| dimm = edac_get_dimm(mci, i, j, 0); |
| mtr = I10NM_GET_DIMMMTR(imc, i, j); |
| mcddrtcfg = I10NM_GET_MCDDRTCFG(imc, i, j); |
| edac_dbg(1, "dimmmtr 0x%x mcddrtcfg 0x%x (mc%d ch%d dimm%d)\n", |
| mtr, mcddrtcfg, imc->mc, i, j); |
| |
| if (IS_DIMM_PRESENT(mtr)) |
| ndimms += skx_get_dimm_info(mtr, 0, dimm, |
| imc, i, j); |
| else if (IS_NVDIMM_PRESENT(mcddrtcfg, j)) |
| ndimms += skx_get_nvdimm_info(dimm, imc, i, j, |
| EDAC_MOD_STR); |
| } |
| if (ndimms && !i10nm_check_ecc(imc, i)) { |
| i10nm_printk(KERN_ERR, "ECC is disabled on imc %d channel %d\n", |
| imc->mc, i); |
| return -ENODEV; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct notifier_block i10nm_mce_dec = { |
| .notifier_call = skx_mce_check_error, |
| .priority = MCE_PRIO_EDAC, |
| }; |
| |
| #ifdef CONFIG_EDAC_DEBUG |
| /* |
| * Debug feature. |
| * Exercise the address decode logic by writing an address to |
| * /sys/kernel/debug/edac/i10nm_test/addr. |
| */ |
| static struct dentry *i10nm_test; |
| |
| static int debugfs_u64_set(void *data, u64 val) |
| { |
| struct mce m; |
| |
| pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val); |
| |
| memset(&m, 0, sizeof(m)); |
| /* ADDRV + MemRd + Unknown channel */ |
| m.status = MCI_STATUS_ADDRV + 0x90; |
| /* One corrected error */ |
| m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT); |
| m.addr = val; |
| skx_mce_check_error(NULL, 0, &m); |
| |
| return 0; |
| } |
| DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n"); |
| |
| static void setup_i10nm_debug(void) |
| { |
| i10nm_test = edac_debugfs_create_dir("i10nm_test"); |
| if (!i10nm_test) |
| return; |
| |
| if (!edac_debugfs_create_file("addr", 0200, i10nm_test, |
| NULL, &fops_u64_wo)) { |
| debugfs_remove(i10nm_test); |
| i10nm_test = NULL; |
| } |
| } |
| |
| static void teardown_i10nm_debug(void) |
| { |
| debugfs_remove_recursive(i10nm_test); |
| } |
| #else |
| static inline void setup_i10nm_debug(void) {} |
| static inline void teardown_i10nm_debug(void) {} |
| #endif /*CONFIG_EDAC_DEBUG*/ |
| |
| static int __init i10nm_init(void) |
| { |
| u8 mc = 0, src_id = 0, node_id = 0; |
| const struct x86_cpu_id *id; |
| const char *owner; |
| struct skx_dev *d; |
| int rc, i, off[3] = {0xd0, 0xc8, 0xcc}; |
| u64 tolm, tohm; |
| |
| edac_dbg(2, "\n"); |
| |
| owner = edac_get_owner(); |
| if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR))) |
| return -EBUSY; |
| |
| id = x86_match_cpu(i10nm_cpuids); |
| if (!id) |
| return -ENODEV; |
| |
| rc = skx_get_hi_lo(0x09a2, off, &tolm, &tohm); |
| if (rc) |
| return rc; |
| |
| rc = skx_get_all_bus_mappings(0x3452, 0xcc, I10NM, &i10nm_edac_list); |
| if (rc < 0) |
| goto fail; |
| if (rc == 0) { |
| i10nm_printk(KERN_ERR, "No memory controllers found\n"); |
| return -ENODEV; |
| } |
| |
| rc = i10nm_get_all_munits(); |
| if (rc < 0) |
| goto fail; |
| |
| list_for_each_entry(d, i10nm_edac_list, list) { |
| rc = skx_get_src_id(d, 0xf8, &src_id); |
| if (rc < 0) |
| goto fail; |
| |
| rc = skx_get_node_id(d, &node_id); |
| if (rc < 0) |
| goto fail; |
| |
| edac_dbg(2, "src_id = %d node_id = %d\n", src_id, node_id); |
| for (i = 0; i < I10NM_NUM_IMC; i++) { |
| if (!d->imc[i].mdev) |
| continue; |
| |
| d->imc[i].mc = mc++; |
| d->imc[i].lmc = i; |
| d->imc[i].src_id = src_id; |
| d->imc[i].node_id = node_id; |
| |
| rc = skx_register_mci(&d->imc[i], d->imc[i].mdev, |
| "Intel_10nm Socket", EDAC_MOD_STR, |
| i10nm_get_dimm_config); |
| if (rc < 0) |
| goto fail; |
| } |
| } |
| |
| rc = skx_adxl_get(); |
| if (rc) |
| goto fail; |
| |
| opstate_init(); |
| mce_register_decode_chain(&i10nm_mce_dec); |
| setup_i10nm_debug(); |
| |
| i10nm_printk(KERN_INFO, "%s\n", I10NM_REVISION); |
| |
| return 0; |
| fail: |
| skx_remove(); |
| return rc; |
| } |
| |
| static void __exit i10nm_exit(void) |
| { |
| edac_dbg(2, "\n"); |
| teardown_i10nm_debug(); |
| mce_unregister_decode_chain(&i10nm_mce_dec); |
| skx_adxl_put(); |
| skx_remove(); |
| } |
| |
| module_init(i10nm_init); |
| module_exit(i10nm_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("MC Driver for Intel 10nm server processors"); |