blob: d5f6919a2d69eca67b86468a339c75b7ca3e4407 [file] [log] [blame]
Audio Graph Card:
Audio Graph Card specifies audio DAI connections of SoC <-> codec.
It is based on common bindings for device graphs.
see ${LINUX}/Documentation/devicetree/bindings/graph.txt
Basically, Audio Graph Card property is same as Simple Card.
see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
Below are same as Simple-Card.
- label
- widgets
- routing
- dai-format
- frame-master
- bitclock-master
- bitclock-inversion
- frame-inversion
- mclk-fs
- hp-det-gpio
- mic-det-gpio
- dai-tdm-slot-num
- dai-tdm-slot-width
- clocks / system-clock-frequency
Required properties:
- compatible : "audio-graph-card";
- dais : list of CPU DAI port{s}
Optional properties:
- pa-gpios: GPIO used to control external amplifier.
-----------------------
Example: Single DAI case
-----------------------
sound_card {
compatible = "audio-graph-card";
dais = <&cpu_port>;
};
dai-controller {
...
cpu_port: port {
cpu_endpoint: endpoint {
remote-endpoint = <&codec_endpoint>;
dai-format = "left_j";
...
};
};
};
audio-codec {
...
port {
codec_endpoint: endpoint {
remote-endpoint = <&cpu_endpoint>;
};
};
};
-----------------------
Example: Multi DAI case
-----------------------
sound-card {
compatible = "audio-graph-card";
label = "sound-card";
dais = <&cpu_port0
&cpu_port1
&cpu_port2>;
};
audio-codec@0 {
...
port {
codec0_endpoint: endpoint {
remote-endpoint = <&cpu_endpoint0>;
};
};
};
audio-codec@1 {
...
port {
codec1_endpoint: endpoint {
remote-endpoint = <&cpu_endpoint1>;
};
};
};
audio-codec@2 {
...
port {
codec2_endpoint: endpoint {
remote-endpoint = <&cpu_endpoint2>;
};
};
};
dai-controller {
...
ports {
cpu_port0: port@0 {
cpu_endpoint0: endpoint {
remote-endpoint = <&codec0_endpoint>;
dai-format = "left_j";
...
};
};
cpu_port1: port@1 {
cpu_endpoint1: endpoint {
remote-endpoint = <&codec1_endpoint>;
dai-format = "i2s";
...
};
};
cpu_port2: port@2 {
cpu_endpoint2: endpoint {
remote-endpoint = <&codec2_endpoint>;
dai-format = "i2s";
...
};
};
};
};
-----------------------
Example: Sampling Rate Conversion
-----------------------
sound_card {
compatible = "audio-graph-card";
label = "sound-card";
prefix = "codec";
routing = "codec Playback", "DAI0 Playback",
"DAI0 Capture", "codec Capture";
convert-rate = <48000>;
dais = <&cpu_port>;
};
audio-codec {
...
port {
codec_endpoint: endpoint {
remote-endpoint = <&cpu_endpoint>;
};
};
};
dai-controller {
...
cpu_port: port {
cpu_endpoint: endpoint {
remote-endpoint = <&codec_endpoint>;
dai-format = "left_j";
...
};
};
};
-----------------------
Example: 2 CPU 1 Codec (Mixing)
-----------------------
sound_card {
compatible = "audio-graph-card";
label = "sound-card";
routing = "codec Playback", "DAI0 Playback",
"codec Playback", "DAI1 Playback",
"DAI0 Capture", "codec Capture";
dais = <&cpu_port>;
};
audio-codec {
...
audio-graph-card,prefix = "codec";
audio-graph-card,convert-rate = <48000>;
port {
reg = <0>;
codec_endpoint0: endpoint@0 {
remote-endpoint = <&cpu_endpoint0>;
};
codec_endpoint1: endpoint@1 {
remote-endpoint = <&cpu_endpoint1>;
};
};
};
dai-controller {
...
cpu_port: port {
cpu_endpoint0: endpoint@0 {
remote-endpoint = <&codec_endpoint0>;
dai-format = "left_j";
...
};
cpu_endpoint1: endpoint@1 {
remote-endpoint = <&codec_endpoint1>;
dai-format = "left_j";
...
};
};
};
-----------------------
Example: Multi DAI with DPCM
-----------------------
CPU0 ------ ak4613
CPU1 ------ HDMI
CPU2 ------ PCM3168A-p /* DPCM 1ch/2ch */
CPU3 --/ /* DPCM 3ch/4ch */
CPU4 --/ /* DPCM 5ch/6ch */
CPU5 --/ /* DPCM 7ch/8ch */
CPU6 ------ PCM3168A-c
sound_card: sound {
compatible = "audio-graph-card";
label = "sound-card";
routing = "pcm3168a Playback", "DAI2 Playback",
"pcm3168a Playback", "DAI3 Playback",
"pcm3168a Playback", "DAI4 Playback",
"pcm3168a Playback", "DAI5 Playback";
dais = <&snd_port0 /* ak4613 */
&snd_port1 /* HDMI0 */
&snd_port2 /* pcm3168a playback */
&snd_port3 /* pcm3168a capture */
>;
};
ak4613: codec@10 {
...
port {
ak4613_endpoint: endpoint {
remote-endpoint = <&rsnd_endpoint0>;
};
};
};
pcm3168a: audio-codec@44 {
...
audio-graph-card,prefix = "pcm3168a";
audio-graph-card,convert-channels = <8>; /* TDM Split */
ports {
port@0 {
reg = <0>;
pcm3168a_endpoint_p1: endpoint@1 {
remote-endpoint = <&rsnd_endpoint2>;
...
};
pcm3168a_endpoint_p2: endpoint@2 {
remote-endpoint = <&rsnd_endpoint3>;
...
};
pcm3168a_endpoint_p3: endpoint@3 {
remote-endpoint = <&rsnd_endpoint4>;
...
};
pcm3168a_endpoint_p4: endpoint@4 {
remote-endpoint = <&rsnd_endpoint5>;
...
};
};
port@1 {
reg = <1>;
pcm3168a_endpoint_c: endpoint {
remote-endpoint = <&rsnd_endpoint6>;
...
};
};
};
};
&sound {
ports {
snd_port0: port@0 {
rsnd_endpoint0: endpoint {
remote-endpoint = <&ak4613_endpoint>;
...
};
};
snd_port1: port@1 {
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
...
};
};
snd_port2: port@2 {
#address-cells = <1>;
#size-cells = <0>;
rsnd_endpoint2: endpoint@2 {
remote-endpoint = <&pcm3168a_endpoint_p1>;
...
};
rsnd_endpoint3: endpoint@3 {
remote-endpoint = <&pcm3168a_endpoint_p2>;
...
};
rsnd_endpoint4: endpoint@4 {
remote-endpoint = <&pcm3168a_endpoint_p3>;
...
};
rsnd_endpoint5: endpoint@5 {
remote-endpoint = <&pcm3168a_endpoint_p4>;
...
};
};
snd_port3: port@6 {
rsnd_endpoint6: endpoint {
remote-endpoint = <&pcm3168a_endpoint_c>;
...
};
};
};
};