blob: 20844dbc002e314709bee62bf00a1104840086d6 [file] [log] [blame]
/*
* Device Tree Source for OMAP3 SoC
*
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <dt-bindings/bus/ti-sysc.h>
#include <dt-bindings/media/omap3-isp.h>
#include "omap3.dtsi"
/ {
aliases {
serial3 = &uart4;
};
cpus {
/* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
cpu: cpu@0 {
operating-points-v2 = <&cpu0_opp_table>;
vbb-supply = <&abb_mpu_iva>;
clock-latency = <300000>; /* From omap-cpufreq driver */
#cooling-cells = <2>;
};
};
/* see Documentation/devicetree/bindings/opp/opp.txt */
cpu0_opp_table: opp-table {
compatible = "operating-points-v2-ti-cpu";
syscon = <&scm_conf>;
opp50-300000000 {
opp-hz = /bits/ 64 <300000000>;
/*
* we currently only select the max voltage from table
* Table 4-19 of the DM3730 Data sheet (SPRS685B)
* Format is: cpu0-supply: <target min max>
* vbb-supply: <target min max>
*/
opp-microvolt = <1012500 1012500 1012500>,
<1012500 1012500 1012500>;
/*
* first value is silicon revision bit mask
* second one is "speed binned" bit mask
*/
opp-supported-hw = <0xffffffff 3>;
opp-suspend;
};
opp100-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1200000 1200000 1200000>,
<1200000 1200000 1200000>;
opp-supported-hw = <0xffffffff 3>;
};
opp130-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1325000 1325000 1325000>,
<1325000 1325000 1325000>;
opp-supported-hw = <0xffffffff 3>;
};
opp1g-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1375000 1375000 1375000>,
<1375000 1375000 1375000>;
/* only on am/dm37x with speed-binned bit set */
opp-supported-hw = <0xffffffff 2>;
};
};
opp_supply_mpu_iva: opp_supply {
compatible = "ti,omap-opp-supply";
ti,absolute-max-voltage-uv = <1375000>;
};
ocp@68000000 {
uart4: serial@49042000 {
compatible = "ti,omap3-uart";
reg = <0x49042000 0x400>;
interrupts = <80>;
dmas = <&sdma 81 &sdma 82>;
dma-names = "tx", "rx";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
abb_mpu_iva: regulator-abb-mpu {
compatible = "ti,abb-v1";
regulator-name = "abb_mpu_iva";
#address-cells = <0>;
#size-cells = <0>;
reg = <0x483072f0 0x8>, <0x48306818 0x4>;
reg-names = "base-address", "int-address";
ti,tranxdone-status-mask = <0x4000000>;
clocks = <&sys_ck>;
ti,settling-time = <30>;
ti,clock-cycles = <8>;
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1012500 0 0 0 0 0
1200000 0 0 0 0 0
1325000 0 0 0 0 0
1375000 1 0 0 0 0
>;
};
omap3_pmx_core2: pinmux@480025a0 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x480025a0 0x5c>;
#address-cells = <1>;
#size-cells = <0>;
#pinctrl-cells = <1>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
isp: isp@480bc000 {
compatible = "ti,omap3-isp";
reg = <0x480bc000 0x12fc
0x480bd800 0x0600>;
interrupts = <24>;
iommus = <&mmu_isp>;
syscon = <&scm_conf 0x2f0>;
ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
#clock-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
};
};
bandgap: bandgap@48002524 {
reg = <0x48002524 0x4>;
compatible = "ti,omap36xx-bandgap";
#thermal-sensor-cells = <0>;
};
target-module@480cb000 {
compatible = "ti,sysc-omap3630-sr", "ti,sysc";
ti,hwmods = "smartreflex_core";
reg = <0x480cb038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&sr2_fck>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x480cb000 0x001000>;
smartreflex_core: smartreflex@0 {
compatible = "ti,omap3-smartreflex-core";
reg = <0 0x400>;
interrupts = <19>;
};
};
target-module@480c9000 {
compatible = "ti,sysc-omap3630-sr", "ti,sysc";
ti,hwmods = "smartreflex_mpu_iva";
reg = <0x480c9038 0x4>;
reg-names = "sysc";
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&sr1_fck>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x480c9000 0x001000>;
smartreflex_mpu_iva: smartreflex@480c9000 {
compatible = "ti,omap3-smartreflex-mpu-iva";
reg = <0 0x400>;
interrupts = <18>;
};
};
/*
* Note that the sysconfig register layout is a subset of the
* "ti,sysc-omap4" type register with just sidle and midle bits
* available while omap34xx has "ti,sysc-omap2" type sysconfig.
*/
sgx_module: target-module@50000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5000fe00 0x4>,
<0x5000fe10 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&sgx_fck>, <&sgx_ick>;
clock-names = "fck", "ick";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x50000000 0x2000000>;
/*
* Closed source PowerVR driver, no child device
* binding or driver in mainline
*/
};
};
thermal_zones: thermal-zones {
#include "omap3-cpu-thermal.dtsi"
};
};
&sdma {
compatible = "ti,omap3630-sdma", "ti,omap-sdma";
};
/* OMAP3630 needs dss_96m_fck for VENC */
&venc {
clocks = <&dss_tv_fck>, <&dss_96m_fck>;
clock-names = "fck", "tv_dac_clk";
};
&ssi {
status = "okay";
clocks = <&ssi_ssr_fck>,
<&ssi_sst_fck>,
<&ssi_ick>;
clock-names = "ssi_ssr_fck",
"ssi_sst_fck",
"ssi_ick";
};
/include/ "omap34xx-omap36xx-clocks.dtsi"
/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
/include/ "omap36xx-clocks.dtsi"