blob: 66a14d60ce1d54b2aafd4594aa140980b93918f9 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/lvds-codec.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Transparent LVDS encoders and decoders
maintainers:
- Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
description: |
This binding supports transparent LVDS encoders and decoders that don't
require any configuration.
LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
incompatible data link layers have been used over time to transmit image data
to LVDS panels. This binding targets devices compatible with the following
specifications only.
[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
Semiconductor
[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
Electronics Standards Association (VESA)
Those devices have been marketed under the FPD-Link and FlatLink brand names
among others.
properties:
compatible:
oneOf:
- items:
- enum:
- ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer
- ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer
- ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
- const: lvds-encoder # Generic LVDS encoder compatible fallback
- items:
- enum:
- ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
- const: lvds-decoder # Generic LVDS decoders compatible fallback
- enum:
- thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
ports:
type: object
description: |
This device has two video ports. Their connections are modeled using the
OF graph bindings specified in Documentation/devicetree/bindings/graph.txt
properties:
'#address-cells':
const: 1
'#size-cells':
const: 0
port@0:
type: object
description: |
For LVDS encoders, port 0 is the parallel input
For LVDS decoders, port 0 is the LVDS input
port@1:
type: object
description: |
For LVDS encoders, port 1 is the LVDS output
For LVDS decoders, port 1 is the parallel output
required:
- port@0
- port@1
additionalProperties: false
powerdown-gpios:
description:
The GPIO used to control the power down line of this device.
maxItems: 1
power-supply: true
required:
- compatible
- ports
additionalProperties: false
examples:
- |
lvds-encoder {
compatible = "ti,ds90c185", "lvds-encoder";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lvds_enc_in: endpoint {
remote-endpoint = <&display_out_rgb>;
};
};
port@1 {
reg = <1>;
lvds_enc_out: endpoint {
remote-endpoint = <&lvds_panel_in>;
};
};
};
};
- |
lvds-decoder {
compatible = "ti,ds90cf384a", "lvds-decoder";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lvds_dec_in: endpoint {
remote-endpoint = <&display_out_lvds>;
};
};
port@1 {
reg = <1>;
lvds_dec_out: endpoint {
remote-endpoint = <&rgb_panel_in>;
};
};
};
};
...