Merge branches 'pm-opp', 'pm-qos', 'acpi-pm', 'pm-domains' and 'pm-tools' * pm-opp: PM / OPP: Correct Documentation about library location opp: of: Support multiple suspend OPPs defined in DT dt-bindings: opp: Support multiple opp-suspend properties opp: core: add regulators enable and disable opp: Don't decrement uninitialized list_kref * pm-qos: PM: QoS: Get rid of unused flags * acpi-pm: ACPI: PM: Print debug messages on device power state changes * pm-domains: PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state() PM / Domains: Simplify genpd_lookup_dev() PM / Domains: Align in-parameter names for some genpd functions * pm-tools: pm-graph: make setVal unbuffered again for python2 and python3 cpupower: update German translation tools/power/cpupower: fix 64bit detection when cross-compiling cpupower: Add missing newline at end of file pm-graph v5.5

diff --git a/Documentation/ABI/testing/sysfs-class-wakeup b/Documentation/ABI/testing/sysfs-class-wakeup
new file mode 100644
index 0000000..754aab8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-wakeup

@@ -0,0 +1,76 @@
+What:		/sys/class/wakeup/
+Date:		June 2019
+Contact:	Tri Vo <trong@android.com>
+Description:
+		The /sys/class/wakeup/ directory contains pointers to all
+		wakeup sources in the kernel at that moment in time.
+
+What:		/sys/class/wakeup/.../name
+Date:		June 2019
+Contact:	Tri Vo <trong@android.com>
+Description:
+		This file contains the name of the wakeup source.
+
+What:		/sys/class/wakeup/.../active_count
+Date:		June 2019
+Contact:	Tri Vo <trong@android.com>
+Description:
+		This file contains the number of times the wakeup source was
+		activated.
+
+What:		/sys/class/wakeup/.../event_count
+Date:		June 2019
+Contact:	Tri Vo <trong@android.com>
+Description:
+		This file contains the number of signaled wakeup events
+		associated with the wakeup source.
+
+What:		/sys/class/wakeup/.../wakeup_count
+Date:		June 2019
+Contact:	Tri Vo <trong@android.com>
+Description:
+		This file contains the number of times the wakeup source might
+		abort suspend.
+
+What:		/sys/class/wakeup/.../expire_count
+Date:		June 2019
+Contact:	Tri Vo <trong@android.com>
+Description:
+		This file contains the number of times the wakeup source's
+		timeout has expired.
+
+What:		/sys/class/wakeup/.../active_time_ms
+Date:		June 2019
+Contact:	Tri Vo <trong@android.com>
+Description:
+		This file contains the amount of time the wakeup source has
+		been continuously active, in milliseconds.  If the wakeup
+		source is not active, this file contains '0'.
+
+What:		/sys/class/wakeup/.../total_time_ms
+Date:		June 2019
+Contact:	Tri Vo <trong@android.com>
+Description:
+		This file contains the total amount of time this wakeup source
+		has been active, in milliseconds.
+
+What:		/sys/class/wakeup/.../max_time_ms
+Date:		June 2019
+Contact:	Tri Vo <trong@android.com>
+Description:
+		This file contains the maximum amount of time this wakeup
+		source has been continuously active, in milliseconds.
+
+What:		/sys/class/wakeup/.../last_change_ms
+Date:		June 2019
+Contact:	Tri Vo <trong@android.com>
+Description:
+		This file contains the monotonic clock time when the wakeup
+		source was touched last time, in milliseconds.
+
+What:		/sys/class/wakeup/.../prevent_suspend_time_ms
+Date:		June 2019
+Contact:	Tri Vo <trong@android.com>
+Description:
+		The file contains the total amount of time this wakeup source
+		has been preventing autosleep, in milliseconds.

diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 80a00f7..1763e64 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power

@@ -260,3 +260,12 @@
 
 		This attribute has no effect on system-wide suspend/resume and
 		hibernation.
+
+What:		/sys/devices/.../power/runtime_status
+Date:		April 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/runtime_status attribute contains
+		the current runtime PM status of the device, which may be
+		"suspended", "suspending", "resuming", "active", "error" (fatal
+		error), or "unsupported" (runtime PM is disabled).

diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index 3c51303..6f87b9d 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power

@@ -301,3 +301,109 @@
 
 		Using this sysfs file will override any values that were
 		set using the kernel command line for disk offset.
+
+What:		/sys/power/suspend_stats
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats directory contains suspend related
+		statistics.
+
+What:		/sys/power/suspend_stats/success
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/success file contains the number
+		of times entering system sleep state succeeded.
+
+What:		/sys/power/suspend_stats/fail
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/fail file contains the number
+		of times entering system sleep state failed.
+
+What:		/sys/power/suspend_stats/failed_freeze
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/failed_freeze file contains the
+		number of times freezing processes failed.
+
+What:		/sys/power/suspend_stats/failed_prepare
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/failed_prepare file contains the
+		number of times preparing all non-sysdev devices for
+		a system PM transition failed.
+
+What:		/sys/power/suspend_stats/failed_resume
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/failed_resume file contains the
+		number of times executing "resume" callbacks of
+		non-sysdev devices failed.
+
+What:		/sys/power/suspend_stats/failed_resume_early
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/failed_resume_early file contains
+		the number of times executing "early resume" callbacks
+		of devices failed.
+
+What:		/sys/power/suspend_stats/failed_resume_noirq
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/failed_resume_noirq file contains
+		the number of times executing "noirq resume" callbacks
+		of devices failed.
+
+What:		/sys/power/suspend_stats/failed_suspend
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/failed_suspend file contains
+		the number of times executing "suspend" callbacks
+		of all non-sysdev devices failed.
+
+What:		/sys/power/suspend_stats/failed_suspend_late
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/failed_suspend_late file contains
+		the number of times executing "late suspend" callbacks
+		of all devices failed.
+
+What:		/sys/power/suspend_stats/failed_suspend_noirq
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/failed_suspend_noirq file contains
+		the number of times executing "noirq suspend" callbacks
+		of all devices failed.
+
+What:		/sys/power/suspend_stats/last_failed_dev
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/last_failed_dev file contains
+		the last device for which a suspend/resume callback failed.
+
+What:		/sys/power/suspend_stats/last_failed_errno
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/last_failed_errno file contains
+		the errno of the last failed attempt at entering
+		system sleep state.
+
+What:		/sys/power/suspend_stats/last_failed_step
+Date:		July 2019
+Contact:	Kalesh Singh <kaleshsingh96@gmail.com>
+Description:
+		The /sys/power/suspend_stats/last_failed_step file contains
+		the last failed step in the suspend/resume path.

diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.txt
index 55193e6..ed577d9 100644
--- a/Documentation/cpu-freq/core.txt
+++ b/Documentation/cpu-freq/core.txt

@@ -57,19 +57,11 @@
 2.1 CPUFreq policy notifiers
 ----------------------------
 
-These are notified when a new policy is intended to be set. Each
-CPUFreq policy notifier is called twice for a policy transition:
+These are notified when a new policy is created or removed.
 
-1.) During CPUFREQ_ADJUST all CPUFreq notifiers may change the limit if
-    they see a need for this - may it be thermal considerations or
-    hardware limitations.
-
-2.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
-   - if two hardware drivers failed to agree on a new policy before this
-   stage, the incompatible hardware shall be shut down, and the user
-   informed of this.
-
-The phase is specified in the second argument to the notifier.
+The phase is specified in the second argument to the notifier.  The phase is
+CPUFREQ_CREATE_POLICY when the policy is first created and it is
+CPUFREQ_REMOVE_POLICY when the policy is removed.
 
 The third argument, a void *pointer, points to a struct cpufreq_policy
 consisting of several values, including min, max (the lower and upper

diff --git a/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt
new file mode 100644
index 0000000..7deae57
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt

@@ -0,0 +1,167 @@
+Allwinner Technologies, Inc. NVMEM CPUFreq and OPP bindings
+===================================
+
+For some SoCs, the CPU frequency subset and voltage value of each OPP
+varies based on the silicon variant in use. Allwinner Process Voltage
+Scaling Tables defines the voltage and frequency value based on the
+speedbin blown in the efuse combination. The sun50i-cpufreq-nvmem driver
+reads the efuse value from the SoC to provide the OPP framework with
+required information.
+
+Required properties:
+--------------------
+In 'cpus' nodes:
+- operating-points-v2: Phandle to the operating-points-v2 table to use.
+
+In 'operating-points-v2' table:
+- compatible: Should be
+	- 'allwinner,sun50i-h6-operating-points'.
+- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
+		efuse registers that has information about the speedbin
+		that is used to select the right frequency/voltage value
+		pair. Please refer the for nvmem-cells bindings
+		Documentation/devicetree/bindings/nvmem/nvmem.txt and
+		also examples below.
+
+In every OPP node:
+- opp-microvolt-<name>: Voltage in micro Volts.
+			At runtime, the platform can pick a <name> and
+			matching opp-microvolt-<name> property.
+			[See: opp.txt]
+			HW:		<name>:
+			sun50i-h6	speed0 speed1 speed2
+
+Example 1:
+---------
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+        };
+
+        cpu_opp_table: opp_table {
+                compatible = "allwinner,sun50i-h6-operating-points";
+                nvmem-cells = <&speedbin_efuse>;
+                opp-shared;
+
+                opp@480000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <480000000>;
+
+                        opp-microvolt-speed0 = <880000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@720000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <720000000>;
+
+                        opp-microvolt-speed0 = <880000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@816000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <816000000>;
+
+                        opp-microvolt-speed0 = <880000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@888000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <888000000>;
+
+                        opp-microvolt-speed0 = <940000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@1080000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <1080000000>;
+
+                        opp-microvolt-speed0 = <1060000>;
+                        opp-microvolt-speed1 = <880000>;
+                        opp-microvolt-speed2 = <840000>;
+                };
+
+                opp@1320000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <1320000000>;
+
+                        opp-microvolt-speed0 = <1160000>;
+                        opp-microvolt-speed1 = <940000>;
+                        opp-microvolt-speed2 = <900000>;
+                };
+
+                opp@1488000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <1488000000>;
+
+                        opp-microvolt-speed0 = <1160000>;
+                        opp-microvolt-speed1 = <1000000>;
+                        opp-microvolt-speed2 = <960000>;
+                };
+        };
+....
+soc {
+....
+	sid: sid@3006000 {
+		compatible = "allwinner,sun50i-h6-sid";
+		reg = <0x03006000 0x400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		....
+		speedbin_efuse: speed@1c {
+			reg = <0x1c 4>;
+		};
+        };
+};

diff --git a/Documentation/power/pm_qos_interface.rst b/Documentation/power/pm_qos_interface.rst
index 69921f0..3097694 100644
--- a/Documentation/power/pm_qos_interface.rst
+++ b/Documentation/power/pm_qos_interface.rst

@@ -7,8 +7,7 @@
 one of the parameters.
 
 Two different PM QoS frameworks are available:
-1. PM QoS classes for cpu_dma_latency, network_latency, network_throughput,
-memory_bandwidth.
+1. PM QoS classes for cpu_dma_latency
 2. the per-device PM QoS framework provides the API to manage the per-device latency
 constraints and PM QoS flags.
 
@@ -79,7 +78,7 @@
 parameter requests in the following way:
 
 To register the default pm_qos target for the specific parameter, the process
-must open one of /dev/[cpu_dma_latency, network_latency, network_throughput]
+must open /dev/cpu_dma_latency
 
 As long as the device node is held open that process has a registered
 request on the parameter.

diff --git a/Documentation/virtual/guest-halt-polling.txt b/Documentation/virtual/guest-halt-polling.txt
new file mode 100644
index 0000000..b3a2a29
--- /dev/null
+++ b/Documentation/virtual/guest-halt-polling.txt

@@ -0,0 +1,78 @@
+Guest halt polling
+==================
+
+The cpuidle_haltpoll driver, with the haltpoll governor, allows
+the guest vcpus to poll for a specified amount of time before
+halting.
+This provides the following benefits to host side polling:
+
+	1) The POLL flag is set while polling is performed, which allows
+	   a remote vCPU to avoid sending an IPI (and the associated
+	   cost of handling the IPI) when performing a wakeup.
+
+	2) The VM-exit cost can be avoided.
+
+The downside of guest side polling is that polling is performed
+even with other runnable tasks in the host.
+
+The basic logic as follows: A global value, guest_halt_poll_ns,
+is configured by the user, indicating the maximum amount of
+time polling is allowed. This value is fixed.
+
+Each vcpu has an adjustable guest_halt_poll_ns
+("per-cpu guest_halt_poll_ns"), which is adjusted by the algorithm
+in response to events (explained below).
+
+Module Parameters
+=================
+
+The haltpoll governor has 5 tunable module parameters:
+
+1) guest_halt_poll_ns:
+Maximum amount of time, in nanoseconds, that polling is
+performed before halting.
+
+Default: 200000
+
+2) guest_halt_poll_shrink:
+Division factor used to shrink per-cpu guest_halt_poll_ns when
+wakeup event occurs after the global guest_halt_poll_ns.
+
+Default: 2
+
+3) guest_halt_poll_grow:
+Multiplication factor used to grow per-cpu guest_halt_poll_ns
+when event occurs after per-cpu guest_halt_poll_ns
+but before global guest_halt_poll_ns.
+
+Default: 2
+
+4) guest_halt_poll_grow_start:
+The per-cpu guest_halt_poll_ns eventually reaches zero
+in case of an idle system. This value sets the initial
+per-cpu guest_halt_poll_ns when growing. This can
+be increased from 10000, to avoid misses during the initial
+growth stage:
+
+10k, 20k, 40k, ... (example assumes guest_halt_poll_grow=2).
+
+Default: 50000
+
+5) guest_halt_poll_allow_shrink:
+
+Bool parameter which allows shrinking. Set to N
+to avoid it (per-cpu guest_halt_poll_ns will remain
+high once achieves global guest_halt_poll_ns value).
+
+Default: Y
+
+The module parameters can be set from the debugfs files in:
+
+	/sys/module/haltpoll/parameters/
+
+Further Notes
+=============
+
+- Care should be taken when setting the guest_halt_poll_ns parameter as a
+large value has the potential to drive the cpu usage to 100% on a machine which
+would be almost entirely idle otherwise.

diff --git a/MAINTAINERS b/MAINTAINERS
index e7a47b5..161c4dc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS

@@ -676,6 +676,13 @@
 S:	Maintained
 F:	drivers/staging/media/allegro-dvt/
 
+ALLWINNER CPUFREQ DRIVER
+M:	Yangtao Li <tiny.windzz@gmail.com>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt
+F:	drivers/cpufreq/sun50i-cpufreq-nvmem.c
+
 ALLWINNER SECURITY SYSTEM
 M:	Corentin Labbe <clabbe.montjoie@gmail.com>
 L:	linux-crypto@vger.kernel.org
@@ -13308,8 +13315,8 @@
 M:	Ilia Lin <ilia.lin@kernel.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
-F:	drivers/cpufreq/qcom-cpufreq-kryo.c
+F:	Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+F:	drivers/cpufreq/qcom-cpufreq-nvmem.c
 
 QUALCOMM EMAC GIGABIT ETHERNET DRIVER
 M:	Timur Tabi <timur@kernel.org>

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 222855c..05e78ac 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig

@@ -794,6 +794,7 @@
 	bool "KVM Guest support (including kvmclock)"
 	depends on PARAVIRT
 	select PARAVIRT_CLOCK
+	select ARCH_CPUIDLE_HALTPOLL
 	default y
 	---help---
 	  This option enables various optimizations for running under the KVM
@@ -802,6 +803,12 @@
 	  underlying device model, the host provides the guest with
 	  timing infrastructure such as time of day, and system time
 
+config ARCH_CPUIDLE_HALTPOLL
+        def_bool n
+        prompt "Disable host haltpoll when loading haltpoll driver"
+        help
+	  If virtualized under KVM, disable host haltpoll.
+
 config PVH
 	bool "Support for running PVH guests"
 	---help---

diff --git a/arch/x86/include/asm/cpuidle_haltpoll.h b/arch/x86/include/asm/cpuidle_haltpoll.h
new file mode 100644
index 0000000..c8b39c6
--- /dev/null
+++ b/arch/x86/include/asm/cpuidle_haltpoll.h

@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ARCH_HALTPOLL_H
+#define _ARCH_HALTPOLL_H
+
+void arch_haltpoll_enable(unsigned int cpu);
+void arch_haltpoll_disable(unsigned int cpu);
+
+#endif

diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 4ab377c9..98dafc1 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c

@@ -705,6 +705,7 @@ unsigned int kvm_arch_para_hints(void)
 {
 	return cpuid_edx(kvm_cpuid_base() | KVM_CPUID_FEATURES);
 }
+EXPORT_SYMBOL_GPL(kvm_arch_para_hints);
 
 static uint32_t __init kvm_detect(void)
 {
@@ -867,3 +868,39 @@ void __init kvm_spinlock_init(void)
 }
 
 #endif	/* CONFIG_PARAVIRT_SPINLOCKS */
+
+#ifdef CONFIG_ARCH_CPUIDLE_HALTPOLL
+
+static void kvm_disable_host_haltpoll(void *i)
+{
+	wrmsrl(MSR_KVM_POLL_CONTROL, 0);
+}
+
+static void kvm_enable_host_haltpoll(void *i)
+{
+	wrmsrl(MSR_KVM_POLL_CONTROL, 1);
+}
+
+void arch_haltpoll_enable(unsigned int cpu)
+{
+	if (!kvm_para_has_feature(KVM_FEATURE_POLL_CONTROL)) {
+		pr_err_once("kvm: host does not support poll control\n");
+		pr_err_once("kvm: host upgrade recommended\n");
+		return;
+	}
+
+	/* Enable guest halt poll disables host halt poll */
+	smp_call_function_single(cpu, kvm_disable_host_haltpoll, NULL, 1);
+}
+EXPORT_SYMBOL_GPL(arch_haltpoll_enable);
+
+void arch_haltpoll_disable(unsigned int cpu)
+{
+	if (!kvm_para_has_feature(KVM_FEATURE_POLL_CONTROL))
+		return;
+
+	/* Enable guest halt poll disables host halt poll */
+	smp_call_function_single(cpu, kvm_enable_host_haltpoll, NULL, 1);
+}
+EXPORT_SYMBOL_GPL(arch_haltpoll_disable);
+#endif

diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 75fea0d..5e94c43 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c

@@ -580,7 +580,7 @@ void __cpuidle default_idle(void)
 	safe_halt();
 	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 }
-#ifdef CONFIG_APM_MODULE
+#if defined(CONFIG_APM_MODULE) || defined(CONFIG_HALTPOLL_CPUIDLE_MODULE)
 EXPORT_SYMBOL(default_idle);
 #endif
 

diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c
index 710488e..04a40d5 100644
--- a/drivers/acpi/acpica/evxfgpe.c
+++ b/drivers/acpi/acpica/evxfgpe.c

@@ -644,17 +644,17 @@ ACPI_EXPORT_SYMBOL(acpi_get_gpe_status)
  * PARAMETERS:  gpe_device          - Parent GPE Device. NULL for GPE0/GPE1
  *              gpe_number          - GPE level within the GPE block
  *
- * RETURN:      None
+ * RETURN:      INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
  *
  * DESCRIPTION: Detect and dispatch a General Purpose Event to either a function
  *              (e.g. EC) or method (e.g. _Lxx/_Exx) handler.
  *
  ******************************************************************************/
-void acpi_dispatch_gpe(acpi_handle gpe_device, u32 gpe_number)
+u32 acpi_dispatch_gpe(acpi_handle gpe_device, u32 gpe_number)
 {
 	ACPI_FUNCTION_TRACE(acpi_dispatch_gpe);
 
-	acpi_ev_detect_gpe(gpe_device, NULL, gpe_number);
+	return acpi_ev_detect_gpe(gpe_device, NULL, gpe_number);
 }
 
 ACPI_EXPORT_SYMBOL(acpi_dispatch_gpe)

diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index f616b16c..08bb9f2 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c

@@ -166,6 +166,10 @@ int acpi_device_set_power(struct acpi_device *device, int state)
 	    || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
 		return -EINVAL;
 
+	acpi_handle_debug(device->handle, "Power state change: %s -> %s\n",
+			  acpi_power_state_string(device->power.state),
+			  acpi_power_state_string(state));
+
 	/* Make sure this is a valid target state */
 
 	/* There is a special case for D0 addressed below. */
@@ -497,7 +501,8 @@ acpi_status acpi_add_pm_notifier(struct acpi_device *adev, struct device *dev,
 		goto out;
 
 	mutex_lock(&acpi_pm_notifier_lock);
-	adev->wakeup.ws = wakeup_source_register(dev_name(&adev->dev));
+	adev->wakeup.ws = wakeup_source_register(&adev->dev,
+						 dev_name(&adev->dev));
 	adev->wakeup.context.dev = dev;
 	adev->wakeup.context.func = func;
 	adev->wakeup.flags.notifier_present = true;

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index c33756e..da1e5c5 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c

@@ -25,6 +25,7 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
+#include <linux/suspend.h>
 #include <linux/acpi.h>
 #include <linux/dmi.h>
 #include <asm/io.h>
@@ -1048,24 +1049,6 @@ void acpi_ec_unblock_transactions(void)
 		acpi_ec_start(first_ec, true);
 }
 
-void acpi_ec_mark_gpe_for_wake(void)
-{
-	if (first_ec && !ec_no_wakeup)
-		acpi_mark_gpe_for_wake(NULL, first_ec->gpe);
-}
-
-void acpi_ec_set_gpe_wake_mask(u8 action)
-{
-	if (first_ec && !ec_no_wakeup)
-		acpi_set_gpe_wake_mask(NULL, first_ec->gpe, action);
-}
-
-void acpi_ec_dispatch_gpe(void)
-{
-	if (first_ec)
-		acpi_dispatch_gpe(NULL, first_ec->gpe);
-}
-
 /* --------------------------------------------------------------------------
                                 Event Management
    -------------------------------------------------------------------------- */
@@ -1931,7 +1914,7 @@ static int acpi_ec_suspend(struct device *dev)
 	struct acpi_ec *ec =
 		acpi_driver_data(to_acpi_device(dev));
 
-	if (acpi_sleep_no_ec_events() && ec_freeze_events)
+	if (!pm_suspend_no_platform() && ec_freeze_events)
 		acpi_ec_disable_event(ec);
 	return 0;
 }
@@ -1948,8 +1931,7 @@ static int acpi_ec_suspend_noirq(struct device *dev)
 	    ec->reference_count >= 1)
 		acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE);
 
-	if (acpi_sleep_no_ec_events())
-		acpi_ec_enter_noirq(ec);
+	acpi_ec_enter_noirq(ec);
 
 	return 0;
 }
@@ -1958,8 +1940,7 @@ static int acpi_ec_resume_noirq(struct device *dev)
 {
 	struct acpi_ec *ec = acpi_driver_data(to_acpi_device(dev));
 
-	if (acpi_sleep_no_ec_events())
-		acpi_ec_leave_noirq(ec);
+	acpi_ec_leave_noirq(ec);
 
 	if (ec_no_wakeup && test_bit(EC_FLAGS_STARTED, &ec->flags) &&
 	    ec->reference_count >= 1)
@@ -1976,7 +1957,35 @@ static int acpi_ec_resume(struct device *dev)
 	acpi_ec_enable_event(ec);
 	return 0;
 }
-#endif
+
+void acpi_ec_mark_gpe_for_wake(void)
+{
+	if (first_ec && !ec_no_wakeup)
+		acpi_mark_gpe_for_wake(NULL, first_ec->gpe);
+}
+EXPORT_SYMBOL_GPL(acpi_ec_mark_gpe_for_wake);
+
+void acpi_ec_set_gpe_wake_mask(u8 action)
+{
+	if (pm_suspend_no_platform() && first_ec && !ec_no_wakeup)
+		acpi_set_gpe_wake_mask(NULL, first_ec->gpe, action);
+}
+
+bool acpi_ec_dispatch_gpe(void)
+{
+	u32 ret;
+
+	if (!first_ec)
+		return false;
+
+	ret = acpi_dispatch_gpe(NULL, first_ec->gpe);
+	if (ret == ACPI_INTERRUPT_HANDLED) {
+		pm_pr_dbg("EC GPE dispatched\n");
+		return true;
+	}
+	return false;
+}
+#endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops acpi_ec_pm = {
 	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(acpi_ec_suspend_noirq, acpi_ec_resume_noirq)

diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index f4c2fe6..afe6636 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h

@@ -194,9 +194,6 @@ void acpi_ec_ecdt_probe(void);
 void acpi_ec_dsdt_probe(void);
 void acpi_ec_block_transactions(void);
 void acpi_ec_unblock_transactions(void);
-void acpi_ec_mark_gpe_for_wake(void);
-void acpi_ec_set_gpe_wake_mask(u8 action);
-void acpi_ec_dispatch_gpe(void);
 int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit,
 			      acpi_handle handle, acpi_ec_query_func func,
 			      void *data);
@@ -204,6 +201,7 @@ void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit);
 
 #ifdef CONFIG_PM_SLEEP
 void acpi_ec_flush_work(void);
+bool acpi_ec_dispatch_gpe(void);
 #endif
 
 
@@ -212,11 +210,9 @@ void acpi_ec_flush_work(void);
   -------------------------------------------------------------------------- */
 #ifdef CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT
 extern bool acpi_s2idle_wakeup(void);
-extern bool acpi_sleep_no_ec_events(void);
 extern int acpi_sleep_init(void);
 #else
 static inline bool acpi_s2idle_wakeup(void) { return false; }
-static inline bool acpi_sleep_no_ec_events(void) { return true; }
 static inline int acpi_sleep_init(void) { return -ENXIO; }
 #endif
 

diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index aea8d67..08da9c2 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c

@@ -284,6 +284,29 @@ static int acpi_processor_stop(struct device *dev)
 	return 0;
 }
 
+bool acpi_processor_cpufreq_init;
+
+static int acpi_processor_notifier(struct notifier_block *nb,
+				   unsigned long event, void *data)
+{
+	struct cpufreq_policy *policy = data;
+	int cpu = policy->cpu;
+
+	if (event == CPUFREQ_CREATE_POLICY) {
+		acpi_thermal_cpufreq_init(cpu);
+		acpi_processor_ppc_init(cpu);
+	} else if (event == CPUFREQ_REMOVE_POLICY) {
+		acpi_processor_ppc_exit(cpu);
+		acpi_thermal_cpufreq_exit(cpu);
+	}
+
+	return 0;
+}
+
+static struct notifier_block acpi_processor_notifier_block = {
+	.notifier_call = acpi_processor_notifier,
+};
+
 /*
  * We keep the driver loaded even when ACPI is not running.
  * This is needed for the powernow-k8 driver, that works even without
@@ -310,8 +333,12 @@ static int __init acpi_processor_driver_init(void)
 	cpuhp_setup_state_nocalls(CPUHP_ACPI_CPUDRV_DEAD, "acpi/cpu-drv:dead",
 				  NULL, acpi_soft_cpu_dead);
 
-	acpi_thermal_cpufreq_init();
-	acpi_processor_ppc_init();
+	if (!cpufreq_register_notifier(&acpi_processor_notifier_block,
+				       CPUFREQ_POLICY_NOTIFIER)) {
+		acpi_processor_cpufreq_init = true;
+		acpi_processor_ignore_ppc_init();
+	}
+
 	acpi_processor_throttling_init();
 	return 0;
 err:
@@ -324,8 +351,12 @@ static void __exit acpi_processor_driver_exit(void)
 	if (acpi_disabled)
 		return;
 
-	acpi_processor_ppc_exit();
-	acpi_thermal_cpufreq_exit();
+	if (acpi_processor_cpufreq_init) {
+		cpufreq_unregister_notifier(&acpi_processor_notifier_block,
+					    CPUFREQ_POLICY_NOTIFIER);
+		acpi_processor_cpufreq_init = false;
+	}
+
 	cpuhp_remove_state_nocalls(hp_online);
 	cpuhp_remove_state_nocalls(CPUHP_ACPI_CPUDRV_DEAD);
 	driver_unregister(&acpi_processor_driver);

diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index ee87cb6..2261713 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c

@@ -50,57 +50,13 @@ module_param(ignore_ppc, int, 0644);
 MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 		 "limited by BIOS, this should help");
 
-#define PPC_REGISTERED   1
-#define PPC_IN_USE       2
-
-static int acpi_processor_ppc_status;
-
-static int acpi_processor_ppc_notifier(struct notifier_block *nb,
-				       unsigned long event, void *data)
-{
-	struct cpufreq_policy *policy = data;
-	struct acpi_processor *pr;
-	unsigned int ppc = 0;
-
-	if (ignore_ppc < 0)
-		ignore_ppc = 0;
-
-	if (ignore_ppc)
-		return 0;
-
-	if (event != CPUFREQ_ADJUST)
-		return 0;
-
-	mutex_lock(&performance_mutex);
-
-	pr = per_cpu(processors, policy->cpu);
-	if (!pr || !pr->performance)
-		goto out;
-
-	ppc = (unsigned int)pr->performance_platform_limit;
-
-	if (ppc >= pr->performance->state_count)
-		goto out;
-
-	cpufreq_verify_within_limits(policy, 0,
-				     pr->performance->states[ppc].
-				     core_frequency * 1000);
-
-      out:
-	mutex_unlock(&performance_mutex);
-
-	return 0;
-}
-
-static struct notifier_block acpi_ppc_notifier_block = {
-	.notifier_call = acpi_processor_ppc_notifier,
-};
+static bool acpi_processor_ppc_in_use;
 
 static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 {
 	acpi_status status = 0;
 	unsigned long long ppc = 0;
-
+	int ret;
 
 	if (!pr)
 		return -EINVAL;
@@ -112,7 +68,7 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 	status = acpi_evaluate_integer(pr->handle, "_PPC", NULL, &ppc);
 
 	if (status != AE_NOT_FOUND)
-		acpi_processor_ppc_status |= PPC_IN_USE;
+		acpi_processor_ppc_in_use = true;
 
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PPC"));
@@ -124,6 +80,17 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 
 	pr->performance_platform_limit = (int)ppc;
 
+	if (ppc >= pr->performance->state_count ||
+	    unlikely(!dev_pm_qos_request_active(&pr->perflib_req)))
+		return 0;
+
+	ret = dev_pm_qos_update_request(&pr->perflib_req,
+			pr->performance->states[ppc].core_frequency * 1000);
+	if (ret < 0) {
+		pr_warn("Failed to update perflib freq constraint: CPU%d (%d)\n",
+			pr->id, ret);
+	}
+
 	return 0;
 }
 
@@ -184,23 +151,32 @@ int acpi_processor_get_bios_limit(int cpu, unsigned int *limit)
 }
 EXPORT_SYMBOL(acpi_processor_get_bios_limit);
 
-void acpi_processor_ppc_init(void)
+void acpi_processor_ignore_ppc_init(void)
 {
-	if (!cpufreq_register_notifier
-	    (&acpi_ppc_notifier_block, CPUFREQ_POLICY_NOTIFIER))
-		acpi_processor_ppc_status |= PPC_REGISTERED;
-	else
-		printk(KERN_DEBUG
-		       "Warning: Processor Platform Limit not supported.\n");
+	if (ignore_ppc < 0)
+		ignore_ppc = 0;
 }
 
-void acpi_processor_ppc_exit(void)
+void acpi_processor_ppc_init(int cpu)
 {
-	if (acpi_processor_ppc_status & PPC_REGISTERED)
-		cpufreq_unregister_notifier(&acpi_ppc_notifier_block,
-					    CPUFREQ_POLICY_NOTIFIER);
+	struct acpi_processor *pr = per_cpu(processors, cpu);
+	int ret;
 
-	acpi_processor_ppc_status &= ~PPC_REGISTERED;
+	ret = dev_pm_qos_add_request(get_cpu_device(cpu),
+				     &pr->perflib_req, DEV_PM_QOS_MAX_FREQUENCY,
+				     INT_MAX);
+	if (ret < 0) {
+		pr_err("Failed to add freq constraint for CPU%d (%d)\n", cpu,
+		       ret);
+		return;
+	}
+}
+
+void acpi_processor_ppc_exit(int cpu)
+{
+	struct acpi_processor *pr = per_cpu(processors, cpu);
+
+	dev_pm_qos_remove_request(&pr->perflib_req);
 }
 
 static int acpi_processor_get_performance_control(struct acpi_processor *pr)
@@ -477,7 +453,7 @@ int acpi_processor_notify_smm(struct module *calling_module)
 	static int is_done = 0;
 	int result;
 
-	if (!(acpi_processor_ppc_status & PPC_REGISTERED))
+	if (!acpi_processor_cpufreq_init)
 		return -EBUSY;
 
 	if (!try_module_get(calling_module))
@@ -513,7 +489,7 @@ int acpi_processor_notify_smm(struct module *calling_module)
 	 * we can allow the cpufreq driver to be rmmod'ed. */
 	is_done = 1;
 
-	if (!(acpi_processor_ppc_status & PPC_IN_USE))
+	if (!acpi_processor_ppc_in_use)
 		module_put(calling_module);
 
 	return 0;
@@ -742,7 +718,7 @@ acpi_processor_register_performance(struct acpi_processor_performance
 {
 	struct acpi_processor *pr;
 
-	if (!(acpi_processor_ppc_status & PPC_REGISTERED))
+	if (!acpi_processor_cpufreq_init)
 		return -EINVAL;
 
 	mutex_lock(&performance_mutex);

diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index 50fb010..ec2638f 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c

@@ -35,7 +35,6 @@ ACPI_MODULE_NAME("processor_thermal");
 #define CPUFREQ_THERMAL_MAX_STEP 3
 
 static DEFINE_PER_CPU(unsigned int, cpufreq_thermal_reduction_pctg);
-static unsigned int acpi_thermal_cpufreq_is_init = 0;
 
 #define reduction_pctg(cpu) \
 	per_cpu(cpufreq_thermal_reduction_pctg, phys_package_first_cpu(cpu))
@@ -61,35 +60,11 @@ static int phys_package_first_cpu(int cpu)
 static int cpu_has_cpufreq(unsigned int cpu)
 {
 	struct cpufreq_policy policy;
-	if (!acpi_thermal_cpufreq_is_init || cpufreq_get_policy(&policy, cpu))
+	if (!acpi_processor_cpufreq_init || cpufreq_get_policy(&policy, cpu))
 		return 0;
 	return 1;
 }
 
-static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb,
-					 unsigned long event, void *data)
-{
-	struct cpufreq_policy *policy = data;
-	unsigned long max_freq = 0;
-
-	if (event != CPUFREQ_ADJUST)
-		goto out;
-
-	max_freq = (
-	    policy->cpuinfo.max_freq *
-	    (100 - reduction_pctg(policy->cpu) * 20)
-	) / 100;
-
-	cpufreq_verify_within_limits(policy, 0, max_freq);
-
-      out:
-	return 0;
-}
-
-static struct notifier_block acpi_thermal_cpufreq_notifier_block = {
-	.notifier_call = acpi_thermal_cpufreq_notifier,
-};
-
 static int cpufreq_get_max_state(unsigned int cpu)
 {
 	if (!cpu_has_cpufreq(cpu))
@@ -108,7 +83,10 @@ static int cpufreq_get_cur_state(unsigned int cpu)
 
 static int cpufreq_set_cur_state(unsigned int cpu, int state)
 {
-	int i;
+	struct cpufreq_policy *policy;
+	struct acpi_processor *pr;
+	unsigned long max_freq;
+	int i, ret;
 
 	if (!cpu_has_cpufreq(cpu))
 		return 0;
@@ -121,33 +99,53 @@ static int cpufreq_set_cur_state(unsigned int cpu, int state)
 	 * frequency.
 	 */
 	for_each_online_cpu(i) {
-		if (topology_physical_package_id(i) ==
+		if (topology_physical_package_id(i) !=
 		    topology_physical_package_id(cpu))
-			cpufreq_update_policy(i);
+			continue;
+
+		pr = per_cpu(processors, i);
+
+		if (unlikely(!dev_pm_qos_request_active(&pr->thermal_req)))
+			continue;
+
+		policy = cpufreq_cpu_get(i);
+		if (!policy)
+			return -EINVAL;
+
+		max_freq = (policy->cpuinfo.max_freq * (100 - reduction_pctg(i) * 20)) / 100;
+
+		cpufreq_cpu_put(policy);
+
+		ret = dev_pm_qos_update_request(&pr->thermal_req, max_freq);
+		if (ret < 0) {
+			pr_warn("Failed to update thermal freq constraint: CPU%d (%d)\n",
+				pr->id, ret);
+		}
 	}
 	return 0;
 }
 
-void acpi_thermal_cpufreq_init(void)
+void acpi_thermal_cpufreq_init(int cpu)
 {
-	int i;
+	struct acpi_processor *pr = per_cpu(processors, cpu);
+	int ret;
 
-	i = cpufreq_register_notifier(&acpi_thermal_cpufreq_notifier_block,
-				      CPUFREQ_POLICY_NOTIFIER);
-	if (!i)
-		acpi_thermal_cpufreq_is_init = 1;
+	ret = dev_pm_qos_add_request(get_cpu_device(cpu),
+				     &pr->thermal_req, DEV_PM_QOS_MAX_FREQUENCY,
+				     INT_MAX);
+	if (ret < 0) {
+		pr_err("Failed to add freq constraint for CPU%d (%d)\n", cpu,
+		       ret);
+		return;
+	}
 }
 
-void acpi_thermal_cpufreq_exit(void)
+void acpi_thermal_cpufreq_exit(int cpu)
 {
-	if (acpi_thermal_cpufreq_is_init)
-		cpufreq_unregister_notifier
-		    (&acpi_thermal_cpufreq_notifier_block,
-		     CPUFREQ_POLICY_NOTIFIER);
+	struct acpi_processor *pr = per_cpu(processors, cpu);
 
-	acpi_thermal_cpufreq_is_init = 0;
+	dev_pm_qos_remove_request(&pr->thermal_req);
 }
-
 #else				/* ! CONFIG_CPU_FREQ */
 static int cpufreq_get_max_state(unsigned int cpu)
 {

diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index f0fe7c1..9fa77d7 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c

@@ -89,6 +89,10 @@ bool acpi_sleep_state_supported(u8 sleep_state)
 }
 
 #ifdef CONFIG_ACPI_SLEEP
+static bool sleep_no_lps0 __read_mostly;
+module_param(sleep_no_lps0, bool, 0644);
+MODULE_PARM_DESC(sleep_no_lps0, "Do not use the special LPS0 device interface");
+
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
 
 u32 acpi_target_system_state(void)
@@ -158,11 +162,11 @@ static int __init init_nvs_nosave(const struct dmi_system_id *d)
 	return 0;
 }
 
-static bool acpi_sleep_no_lps0;
+static bool acpi_sleep_default_s3;
 
-static int __init init_no_lps0(const struct dmi_system_id *d)
+static int __init init_default_s3(const struct dmi_system_id *d)
 {
-	acpi_sleep_no_lps0 = true;
+	acpi_sleep_default_s3 = true;
 	return 0;
 }
 
@@ -363,7 +367,7 @@ static const struct dmi_system_id acpisleep_dmi_table[] __initconst = {
 	 * S0 Idle firmware interface.
 	 */
 	{
-	.callback = init_no_lps0,
+	.callback = init_default_s3,
 	.ident = "Dell XPS13 9360",
 	.matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
@@ -376,7 +380,7 @@ static const struct dmi_system_id acpisleep_dmi_table[] __initconst = {
 	 * https://bugzilla.kernel.org/show_bug.cgi?id=199057).
 	 */
 	{
-	.callback = init_no_lps0,
+	.callback = init_default_s3,
 	.ident = "ThinkPad X1 Tablet(2016)",
 	.matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
@@ -524,8 +528,9 @@ static void acpi_pm_end(void)
 	acpi_sleep_tts_switch(acpi_target_sleep_state);
 }
 #else /* !CONFIG_ACPI_SLEEP */
+#define sleep_no_lps0	(1)
 #define acpi_target_sleep_state	ACPI_STATE_S0
-#define acpi_sleep_no_lps0	(false)
+#define acpi_sleep_default_s3	(1)
 static inline void acpi_sleep_dmi_check(void) {}
 #endif /* CONFIG_ACPI_SLEEP */
 
@@ -691,7 +696,6 @@ static const struct platform_suspend_ops acpi_suspend_ops_old = {
 	.recover = acpi_pm_finish,
 };
 
-static bool s2idle_in_progress;
 static bool s2idle_wakeup;
 
 /*
@@ -904,42 +908,43 @@ static int lps0_device_attach(struct acpi_device *adev,
 	if (lps0_device_handle)
 		return 0;
 
-	if (acpi_sleep_no_lps0) {
-		acpi_handle_info(adev->handle,
-				 "Low Power S0 Idle interface disabled\n");
-		return 0;
-	}
-
 	if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
 		return 0;
 
 	guid_parse(ACPI_LPS0_DSM_UUID, &lps0_dsm_guid);
 	/* Check if the _DSM is present and as expected. */
 	out_obj = acpi_evaluate_dsm(adev->handle, &lps0_dsm_guid, 1, 0, NULL);
-	if (out_obj && out_obj->type == ACPI_TYPE_BUFFER) {
-		char bitmask = *(char *)out_obj->buffer.pointer;
-
-		lps0_dsm_func_mask = bitmask;
-		lps0_device_handle = adev->handle;
-		/*
-		 * Use suspend-to-idle by default if the default
-		 * suspend mode was not set from the command line.
-		 */
-		if (mem_sleep_default > PM_SUSPEND_MEM)
-			mem_sleep_current = PM_SUSPEND_TO_IDLE;
-
-		acpi_handle_debug(adev->handle, "_DSM function mask: 0x%x\n",
-				  bitmask);
-
-		acpi_ec_mark_gpe_for_wake();
-	} else {
+	if (!out_obj || out_obj->type != ACPI_TYPE_BUFFER) {
 		acpi_handle_debug(adev->handle,
 				  "_DSM function 0 evaluation failed\n");
+		return 0;
 	}
+
+	lps0_dsm_func_mask = *(char *)out_obj->buffer.pointer;
+
 	ACPI_FREE(out_obj);
 
+	acpi_handle_debug(adev->handle, "_DSM function mask: 0x%x\n",
+			  lps0_dsm_func_mask);
+
+	lps0_device_handle = adev->handle;
+
 	lpi_device_get_constraints();
 
+	/*
+	 * Use suspend-to-idle by default if the default suspend mode was not
+	 * set from the command line.
+	 */
+	if (mem_sleep_default > PM_SUSPEND_MEM && !acpi_sleep_default_s3)
+		mem_sleep_current = PM_SUSPEND_TO_IDLE;
+
+	/*
+	 * Some LPS0 systems, like ASUS Zenbook UX430UNR/i7-8550U, require the
+	 * EC GPE to be enabled while suspended for certain wakeup devices to
+	 * work, so mark it as wakeup-capable.
+	 */
+	acpi_ec_mark_gpe_for_wake();
+
 	return 0;
 }
 
@@ -951,98 +956,110 @@ static struct acpi_scan_handler lps0_handler = {
 static int acpi_s2idle_begin(void)
 {
 	acpi_scan_lock_acquire();
-	s2idle_in_progress = true;
 	return 0;
 }
 
 static int acpi_s2idle_prepare(void)
 {
-	if (lps0_device_handle) {
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF);
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_ENTRY);
-
+	if (acpi_sci_irq_valid()) {
+		enable_irq_wake(acpi_sci_irq);
 		acpi_ec_set_gpe_wake_mask(ACPI_GPE_ENABLE);
 	}
 
-	if (acpi_sci_irq_valid())
-		enable_irq_wake(acpi_sci_irq);
-
 	acpi_enable_wakeup_devices(ACPI_STATE_S0);
 
 	/* Change the configuration of GPEs to avoid spurious wakeup. */
 	acpi_enable_all_wakeup_gpes();
 	acpi_os_wait_events_complete();
+
+	s2idle_wakeup = true;
+	return 0;
+}
+
+static int acpi_s2idle_prepare_late(void)
+{
+	if (!lps0_device_handle || sleep_no_lps0)
+		return 0;
+
+	if (pm_debug_messages_on)
+		lpi_check_constraints();
+
+	acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF);
+	acpi_sleep_run_lps0_dsm(ACPI_LPS0_ENTRY);
+
 	return 0;
 }
 
 static void acpi_s2idle_wake(void)
 {
-	if (!lps0_device_handle)
+	/*
+	 * If IRQD_WAKEUP_ARMED is set for the SCI at this point, the SCI has
+	 * not triggered while suspended, so bail out.
+	 */
+	if (!acpi_sci_irq_valid() ||
+	    irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq)))
 		return;
 
-	if (pm_debug_messages_on)
-		lpi_check_constraints();
-
 	/*
-	 * If IRQD_WAKEUP_ARMED is not set for the SCI at this point, it means
-	 * that the SCI has triggered while suspended, so cancel the wakeup in
-	 * case it has not been a wakeup event (the GPEs will be checked later).
+	 * If there are EC events to process, the wakeup may be a spurious one
+	 * coming from the EC.
 	 */
-	if (acpi_sci_irq_valid() &&
-	    !irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq))) {
-		pm_system_cancel_wakeup();
-		s2idle_wakeup = true;
+	if (acpi_ec_dispatch_gpe()) {
 		/*
-		 * On some platforms with the LPS0 _DSM device noirq resume
-		 * takes too much time for EC wakeup events to survive, so look
-		 * for them now.
+		 * Cancel the wakeup and process all pending events in case
+		 * there are any wakeup ones in there.
+		 *
+		 * Note that if any non-EC GPEs are active at this point, the
+		 * SCI will retrigger after the rearming below, so no events
+		 * should be missed by canceling the wakeup here.
 		 */
-		acpi_ec_dispatch_gpe();
+		pm_system_cancel_wakeup();
+		/*
+		 * The EC driver uses the system workqueue and an additional
+		 * special one, so those need to be flushed too.
+		 */
+		acpi_os_wait_events_complete(); /* synchronize EC GPE processing */
+		acpi_ec_flush_work();
+		acpi_os_wait_events_complete(); /* synchronize Notify handling */
+
+		rearm_wake_irq(acpi_sci_irq);
 	}
 }
 
-static void acpi_s2idle_sync(void)
+static void acpi_s2idle_restore_early(void)
 {
-	/*
-	 * Process all pending events in case there are any wakeup ones.
-	 *
-	 * The EC driver uses the system workqueue and an additional special
-	 * one, so those need to be flushed too.
-	 */
-	acpi_os_wait_events_complete();	/* synchronize SCI IRQ handling */
-	acpi_ec_flush_work();
-	acpi_os_wait_events_complete();	/* synchronize Notify handling */
-	s2idle_wakeup = false;
+	if (!lps0_device_handle || sleep_no_lps0)
+		return;
+
+	acpi_sleep_run_lps0_dsm(ACPI_LPS0_EXIT);
+	acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_ON);
 }
 
 static void acpi_s2idle_restore(void)
 {
+	s2idle_wakeup = false;
+
 	acpi_enable_all_runtime_gpes();
 
 	acpi_disable_wakeup_devices(ACPI_STATE_S0);
 
-	if (acpi_sci_irq_valid())
-		disable_irq_wake(acpi_sci_irq);
-
-	if (lps0_device_handle) {
+	if (acpi_sci_irq_valid()) {
 		acpi_ec_set_gpe_wake_mask(ACPI_GPE_DISABLE);
-
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_EXIT);
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_ON);
+		disable_irq_wake(acpi_sci_irq);
 	}
 }
 
 static void acpi_s2idle_end(void)
 {
-	s2idle_in_progress = false;
 	acpi_scan_lock_release();
 }
 
 static const struct platform_s2idle_ops acpi_s2idle_ops = {
 	.begin = acpi_s2idle_begin,
 	.prepare = acpi_s2idle_prepare,
+	.prepare_late = acpi_s2idle_prepare_late,
 	.wake = acpi_s2idle_wake,
-	.sync = acpi_s2idle_sync,
+	.restore_early = acpi_s2idle_restore_early,
 	.restore = acpi_s2idle_restore,
 	.end = acpi_s2idle_end,
 };
@@ -1063,7 +1080,6 @@ static void acpi_sleep_suspend_setup(void)
 }
 
 #else /* !CONFIG_SUSPEND */
-#define s2idle_in_progress	(false)
 #define s2idle_wakeup		(false)
 #define lps0_device_handle	(NULL)
 static inline void acpi_sleep_suspend_setup(void) {}
@@ -1074,11 +1090,6 @@ bool acpi_s2idle_wakeup(void)
 	return s2idle_wakeup;
 }
 
-bool acpi_sleep_no_ec_events(void)
-{
-	return !s2idle_in_progress || !lps0_device_handle;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static u32 saved_bm_rld;
 

diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index 63c1e76..8cab1f5 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c

@@ -174,7 +174,7 @@ init_cpu_capacity_callback(struct notifier_block *nb,
 	if (!raw_capacity)
 		return 0;
 
-	if (val != CPUFREQ_NOTIFY)
+	if (val != CPUFREQ_CREATE_POLICY)
 		return 0;
 
 	pr_debug("cpu_capacity: init cpu capacity for CPUs [%*pbl] (to_visit=%*pbl)\n",

diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index e1bb691..ec5bb19 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_PM)	+= sysfs.o generic_ops.o common.o qos.o runtime.o wakeirq.o
-obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
+obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o wakeup_stats.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS)	+=  domain.o domain_governor.o
 obj-$(CONFIG_HAVE_CLK)	+= clock_ops.o

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index b063bc4..cc85e87 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c

@@ -149,29 +149,24 @@ static inline bool irq_safe_dev_in_no_sleep_domain(struct device *dev,
 	return ret;
 }
 
+static int genpd_runtime_suspend(struct device *dev);
+
 /*
  * Get the generic PM domain for a particular struct device.
  * This validates the struct device pointer, the PM domain pointer,
  * and checks that the PM domain pointer is a real generic PM domain.
  * Any failure results in NULL being returned.
  */
-static struct generic_pm_domain *genpd_lookup_dev(struct device *dev)
+static struct generic_pm_domain *dev_to_genpd_safe(struct device *dev)
 {
-	struct generic_pm_domain *genpd = NULL, *gpd;
-
 	if (IS_ERR_OR_NULL(dev) || IS_ERR_OR_NULL(dev->pm_domain))
 		return NULL;
 
-	mutex_lock(&gpd_list_lock);
-	list_for_each_entry(gpd, &gpd_list, gpd_list_node) {
-		if (&gpd->domain == dev->pm_domain) {
-			genpd = gpd;
-			break;
-		}
-	}
-	mutex_unlock(&gpd_list_lock);
+	/* A genpd's always have its ->runtime_suspend() callback assigned. */
+	if (dev->pm_domain->ops.runtime_suspend == genpd_runtime_suspend)
+		return pd_to_genpd(dev->pm_domain);
 
-	return genpd;
+	return NULL;
 }
 
 /*
@@ -385,8 +380,8 @@ int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state)
 	unsigned int prev;
 	int ret;
 
-	genpd = dev_to_genpd(dev);
-	if (IS_ERR(genpd))
+	genpd = dev_to_genpd_safe(dev);
+	if (!genpd)
 		return -ENODEV;
 
 	if (unlikely(!genpd->set_performance_state))
@@ -1610,7 +1605,7 @@ static int genpd_remove_device(struct generic_pm_domain *genpd,
  */
 int pm_genpd_remove_device(struct device *dev)
 {
-	struct generic_pm_domain *genpd = genpd_lookup_dev(dev);
+	struct generic_pm_domain *genpd = dev_to_genpd_safe(dev);
 
 	if (!genpd)
 		return -EINVAL;

diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 7fb2c39..134a8af 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c

@@ -716,7 +716,7 @@ static void async_resume_noirq(void *data, async_cookie_t cookie)
 	put_device(dev);
 }
 
-void dpm_noirq_resume_devices(pm_message_t state)
+static void dpm_noirq_resume_devices(pm_message_t state)
 {
 	struct device *dev;
 	ktime_t starttime = ktime_get();
@@ -760,13 +760,6 @@ void dpm_noirq_resume_devices(pm_message_t state)
 	trace_suspend_resume(TPS("dpm_resume_noirq"), state.event, false);
 }
 
-void dpm_noirq_end(void)
-{
-	resume_device_irqs();
-	device_wakeup_disarm_wake_irqs();
-	cpuidle_resume();
-}
-
 /**
  * dpm_resume_noirq - Execute "noirq resume" callbacks for all devices.
  * @state: PM transition of the system being carried out.
@@ -777,7 +770,11 @@ void dpm_noirq_end(void)
 void dpm_resume_noirq(pm_message_t state)
 {
 	dpm_noirq_resume_devices(state);
-	dpm_noirq_end();
+
+	resume_device_irqs();
+	device_wakeup_disarm_wake_irqs();
+
+	cpuidle_resume();
 }
 
 static pm_callback_t dpm_subsys_resume_early_cb(struct device *dev,
@@ -1291,11 +1288,6 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a
 	if (async_error)
 		goto Complete;
 
-	if (pm_wakeup_pending()) {
-		async_error = -EBUSY;
-		goto Complete;
-	}
-
 	if (dev->power.syscore || dev->power.direct_complete)
 		goto Complete;
 
@@ -1362,14 +1354,7 @@ static int device_suspend_noirq(struct device *dev)
 	return __device_suspend_noirq(dev, pm_transition, false);
 }
 
-void dpm_noirq_begin(void)
-{
-	cpuidle_pause();
-	device_wakeup_arm_wake_irqs();
-	suspend_device_irqs();
-}
-
-int dpm_noirq_suspend_devices(pm_message_t state)
+static int dpm_noirq_suspend_devices(pm_message_t state)
 {
 	ktime_t starttime = ktime_get();
 	int error = 0;
@@ -1426,7 +1411,11 @@ int dpm_suspend_noirq(pm_message_t state)
 {
 	int ret;
 
-	dpm_noirq_begin();
+	cpuidle_pause();
+
+	device_wakeup_arm_wake_irqs();
+	suspend_device_irqs();
+
 	ret = dpm_noirq_suspend_devices(state);
 	if (ret)
 		dpm_resume_noirq(resume_event(state));

diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index ec33fbdb..39a06a0 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h

@@ -149,3 +149,21 @@ static inline void device_pm_init(struct device *dev)
 	device_pm_sleep_init(dev);
 	pm_runtime_init(dev);
 }
+
+#ifdef CONFIG_PM_SLEEP
+
+/* drivers/base/power/wakeup_stats.c */
+extern int wakeup_source_sysfs_add(struct device *parent,
+				   struct wakeup_source *ws);
+extern void wakeup_source_sysfs_remove(struct wakeup_source *ws);
+
+extern int pm_wakeup_source_sysfs_add(struct device *parent);
+
+#else /* !CONFIG_PM_SLEEP */
+
+static inline int pm_wakeup_source_sysfs_add(struct device *parent)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PM_SLEEP */

diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index 1b9c281c..d7d82db 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c

@@ -5,6 +5,7 @@
 #include <linux/export.h>
 #include <linux/pm_qos.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_wakeup.h>
 #include <linux/atomic.h>
 #include <linux/jiffies.h>
 #include "power.h"
@@ -667,8 +668,13 @@ int dpm_sysfs_add(struct device *dev)
 		if (rc)
 			goto err_wakeup;
 	}
+	rc = pm_wakeup_source_sysfs_add(dev);
+	if (rc)
+		goto err_latency;
 	return 0;
 
+ err_latency:
+	sysfs_unmerge_group(&dev->kobj, &pm_qos_latency_tolerance_attr_group);
  err_wakeup:
 	sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
  err_runtime:

diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index ee31d4f..5817b51 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c

@@ -72,22 +72,7 @@ static struct wakeup_source deleted_ws = {
 	.lock =  __SPIN_LOCK_UNLOCKED(deleted_ws.lock),
 };
 
-/**
- * wakeup_source_prepare - Prepare a new wakeup source for initialization.
- * @ws: Wakeup source to prepare.
- * @name: Pointer to the name of the new wakeup source.
- *
- * Callers must ensure that the @name string won't be freed when @ws is still in
- * use.
- */
-void wakeup_source_prepare(struct wakeup_source *ws, const char *name)
-{
-	if (ws) {
-		memset(ws, 0, sizeof(*ws));
-		ws->name = name;
-	}
-}
-EXPORT_SYMBOL_GPL(wakeup_source_prepare);
+static DEFINE_IDA(wakeup_ida);
 
 /**
  * wakeup_source_create - Create a struct wakeup_source object.
@@ -96,13 +81,31 @@ EXPORT_SYMBOL_GPL(wakeup_source_prepare);
 struct wakeup_source *wakeup_source_create(const char *name)
 {
 	struct wakeup_source *ws;
+	const char *ws_name;
+	int id;
 
-	ws = kmalloc(sizeof(*ws), GFP_KERNEL);
+	ws = kzalloc(sizeof(*ws), GFP_KERNEL);
 	if (!ws)
-		return NULL;
+		goto err_ws;
 
-	wakeup_source_prepare(ws, name ? kstrdup_const(name, GFP_KERNEL) : NULL);
+	ws_name = kstrdup_const(name, GFP_KERNEL);
+	if (!ws_name)
+		goto err_name;
+	ws->name = ws_name;
+
+	id = ida_alloc(&wakeup_ida, GFP_KERNEL);
+	if (id < 0)
+		goto err_id;
+	ws->id = id;
+
 	return ws;
+
+err_id:
+	kfree_const(ws->name);
+err_name:
+	kfree(ws);
+err_ws:
+	return NULL;
 }
 EXPORT_SYMBOL_GPL(wakeup_source_create);
 
@@ -134,6 +137,13 @@ static void wakeup_source_record(struct wakeup_source *ws)
 	spin_unlock_irqrestore(&deleted_ws.lock, flags);
 }
 
+static void wakeup_source_free(struct wakeup_source *ws)
+{
+	ida_free(&wakeup_ida, ws->id);
+	kfree_const(ws->name);
+	kfree(ws);
+}
+
 /**
  * wakeup_source_destroy - Destroy a struct wakeup_source object.
  * @ws: Wakeup source to destroy.
@@ -147,8 +157,7 @@ void wakeup_source_destroy(struct wakeup_source *ws)
 
 	__pm_relax(ws);
 	wakeup_source_record(ws);
-	kfree_const(ws->name);
-	kfree(ws);
+	wakeup_source_free(ws);
 }
 EXPORT_SYMBOL_GPL(wakeup_source_destroy);
 
@@ -200,16 +209,26 @@ EXPORT_SYMBOL_GPL(wakeup_source_remove);
 
 /**
  * wakeup_source_register - Create wakeup source and add it to the list.
+ * @dev: Device this wakeup source is associated with (or NULL if virtual).
  * @name: Name of the wakeup source to register.
  */
-struct wakeup_source *wakeup_source_register(const char *name)
+struct wakeup_source *wakeup_source_register(struct device *dev,
+					     const char *name)
 {
 	struct wakeup_source *ws;
+	int ret;
 
 	ws = wakeup_source_create(name);
-	if (ws)
+	if (ws) {
+		if (!dev || device_is_registered(dev)) {
+			ret = wakeup_source_sysfs_add(dev, ws);
+			if (ret) {
+				wakeup_source_free(ws);
+				return NULL;
+			}
+		}
 		wakeup_source_add(ws);
-
+	}
 	return ws;
 }
 EXPORT_SYMBOL_GPL(wakeup_source_register);
@@ -222,6 +241,7 @@ void wakeup_source_unregister(struct wakeup_source *ws)
 {
 	if (ws) {
 		wakeup_source_remove(ws);
+		wakeup_source_sysfs_remove(ws);
 		wakeup_source_destroy(ws);
 	}
 }
@@ -265,7 +285,7 @@ int device_wakeup_enable(struct device *dev)
 	if (pm_suspend_target_state != PM_SUSPEND_ON)
 		dev_dbg(dev, "Suspicious %s() during system transition!\n", __func__);
 
-	ws = wakeup_source_register(dev_name(dev));
+	ws = wakeup_source_register(dev, dev_name(dev));
 	if (!ws)
 		return -ENOMEM;
 
@@ -859,7 +879,7 @@ EXPORT_SYMBOL_GPL(pm_system_wakeup);
 
 void pm_system_cancel_wakeup(void)
 {
-	atomic_dec(&pm_abort_suspend);
+	atomic_dec_if_positive(&pm_abort_suspend);
 }
 
 void pm_wakeup_clear(bool reset)

diff --git a/drivers/base/power/wakeup_stats.c b/drivers/base/power/wakeup_stats.c
new file mode 100644
index 0000000..c773491
--- /dev/null
+++ b/drivers/base/power/wakeup_stats.c

@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Wakeup statistics in sysfs
+ *
+ * Copyright (c) 2019 Linux Foundation
+ * Copyright (c) 2019 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+ * Copyright (c) 2019 Google Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/idr.h>
+#include <linux/init.h>
+#include <linux/kdev_t.h>
+#include <linux/kernel.h>
+#include <linux/kobject.h>
+#include <linux/slab.h>
+#include <linux/timekeeping.h>
+
+#include "power.h"
+
+static struct class *wakeup_class;
+
+#define wakeup_attr(_name)						\
+static ssize_t _name##_show(struct device *dev,				\
+			    struct device_attribute *attr, char *buf)	\
+{									\
+	struct wakeup_source *ws = dev_get_drvdata(dev);		\
+									\
+	return sprintf(buf, "%lu\n", ws->_name);			\
+}									\
+static DEVICE_ATTR_RO(_name)
+
+wakeup_attr(active_count);
+wakeup_attr(event_count);
+wakeup_attr(wakeup_count);
+wakeup_attr(expire_count);
+
+static ssize_t active_time_ms_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct wakeup_source *ws = dev_get_drvdata(dev);
+	ktime_t active_time =
+		ws->active ? ktime_sub(ktime_get(), ws->last_time) : 0;
+
+	return sprintf(buf, "%lld\n", ktime_to_ms(active_time));
+}
+static DEVICE_ATTR_RO(active_time_ms);
+
+static ssize_t total_time_ms_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct wakeup_source *ws = dev_get_drvdata(dev);
+	ktime_t active_time;
+	ktime_t total_time = ws->total_time;
+
+	if (ws->active) {
+		active_time = ktime_sub(ktime_get(), ws->last_time);
+		total_time = ktime_add(total_time, active_time);
+	}
+	return sprintf(buf, "%lld\n", ktime_to_ms(total_time));
+}
+static DEVICE_ATTR_RO(total_time_ms);
+
+static ssize_t max_time_ms_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct wakeup_source *ws = dev_get_drvdata(dev);
+	ktime_t active_time;
+	ktime_t max_time = ws->max_time;
+
+	if (ws->active) {
+		active_time = ktime_sub(ktime_get(), ws->last_time);
+		if (active_time > max_time)
+			max_time = active_time;
+	}
+	return sprintf(buf, "%lld\n", ktime_to_ms(max_time));
+}
+static DEVICE_ATTR_RO(max_time_ms);
+
+static ssize_t last_change_ms_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct wakeup_source *ws = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%lld\n", ktime_to_ms(ws->last_time));
+}
+static DEVICE_ATTR_RO(last_change_ms);
+
+static ssize_t name_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct wakeup_source *ws = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", ws->name);
+}
+static DEVICE_ATTR_RO(name);
+
+static ssize_t prevent_suspend_time_ms_show(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	struct wakeup_source *ws = dev_get_drvdata(dev);
+	ktime_t prevent_sleep_time = ws->prevent_sleep_time;
+
+	if (ws->active && ws->autosleep_enabled) {
+		prevent_sleep_time = ktime_add(prevent_sleep_time,
+			ktime_sub(ktime_get(), ws->start_prevent_time));
+	}
+	return sprintf(buf, "%lld\n", ktime_to_ms(prevent_sleep_time));
+}
+static DEVICE_ATTR_RO(prevent_suspend_time_ms);
+
+static struct attribute *wakeup_source_attrs[] = {
+	&dev_attr_name.attr,
+	&dev_attr_active_count.attr,
+	&dev_attr_event_count.attr,
+	&dev_attr_wakeup_count.attr,
+	&dev_attr_expire_count.attr,
+	&dev_attr_active_time_ms.attr,
+	&dev_attr_total_time_ms.attr,
+	&dev_attr_max_time_ms.attr,
+	&dev_attr_last_change_ms.attr,
+	&dev_attr_prevent_suspend_time_ms.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(wakeup_source);
+
+static void device_create_release(struct device *dev)
+{
+	kfree(dev);
+}
+
+static struct device *wakeup_source_device_create(struct device *parent,
+						  struct wakeup_source *ws)
+{
+	struct device *dev = NULL;
+	int retval = -ENODEV;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	device_initialize(dev);
+	dev->devt = MKDEV(0, 0);
+	dev->class = wakeup_class;
+	dev->parent = parent;
+	dev->groups = wakeup_source_groups;
+	dev->release = device_create_release;
+	dev_set_drvdata(dev, ws);
+	device_set_pm_not_required(dev);
+
+	retval = kobject_set_name(&dev->kobj, "wakeup%d", ws->id);
+	if (retval)
+		goto error;
+
+	retval = device_add(dev);
+	if (retval)
+		goto error;
+
+	return dev;
+
+error:
+	put_device(dev);
+	return ERR_PTR(retval);
+}
+
+/**
+ * wakeup_source_sysfs_add - Add wakeup_source attributes to sysfs.
+ * @parent: Device given wakeup source is associated with (or NULL if virtual).
+ * @ws: Wakeup source to be added in sysfs.
+ */
+int wakeup_source_sysfs_add(struct device *parent, struct wakeup_source *ws)
+{
+	struct device *dev;
+
+	dev = wakeup_source_device_create(parent, ws);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+	ws->dev = dev;
+
+	return 0;
+}
+
+/**
+ * pm_wakeup_source_sysfs_add - Add wakeup_source attributes to sysfs
+ * for a device if they're missing.
+ * @parent: Device given wakeup source is associated with
+ */
+int pm_wakeup_source_sysfs_add(struct device *parent)
+{
+	if (!parent->power.wakeup || parent->power.wakeup->dev)
+		return 0;
+
+	return wakeup_source_sysfs_add(parent, parent->power.wakeup);
+}
+
+/**
+ * wakeup_source_sysfs_remove - Remove wakeup_source attributes from sysfs.
+ * @ws: Wakeup source to be removed from sysfs.
+ */
+void wakeup_source_sysfs_remove(struct wakeup_source *ws)
+{
+	device_unregister(ws->dev);
+}
+
+static int __init wakeup_sources_sysfs_init(void)
+{
+	wakeup_class = class_create(THIS_MODULE, "wakeup");
+
+	return PTR_ERR_OR_ZERO(wakeup_class);
+}
+postcore_initcall(wakeup_sources_sysfs_init);

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 56c31a7..a905796 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm

@@ -19,6 +19,18 @@
 
 	  If in doubt, say N.
 
+config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM
+	tristate "Allwinner nvmem based SUN50I CPUFreq driver"
+	depends on ARCH_SUNXI
+	depends on NVMEM_SUNXI_SID
+	select PM_OPP
+	help
+	  This adds the nvmem based CPUFreq driver for Allwinner
+	  h6 SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun50i-cpufreq-nvmem.
+
 config ARM_ARMADA_37XX_CPUFREQ
 	tristate "Armada 37xx CPUFreq support"
 	depends on ARCH_MVEBU && CPUFREQ_DT
@@ -120,8 +132,8 @@
 	depends on ARCH_OMAP2PLUS
 	default ARCH_OMAP2PLUS
 
-config ARM_QCOM_CPUFREQ_KRYO
-	tristate "Qualcomm Kryo based CPUFreq"
+config ARM_QCOM_CPUFREQ_NVMEM
+	tristate "Qualcomm nvmem based CPUFreq"
 	depends on ARM64
 	depends on QCOM_QFPROM
 	depends on QCOM_SMEM

diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 5a6c70d..9a9f5cc 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile

@@ -64,7 +64,7 @@
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
 obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW)	+= qcom-cpufreq-hw.o
-obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO)	+= qcom-cpufreq-kryo.o
+obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM)	+= qcom-cpufreq-nvmem.o
 obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) 	+= raspberrypi-cpufreq.o
 obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
 obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
@@ -80,6 +80,7 @@
 obj-$(CONFIG_ARM_SCPI_CPUFREQ)		+= scpi-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARM_STI_CPUFREQ)		+= sti-cpufreq.o
+obj-$(CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM) += sun50i-cpufreq-nvmem.o
 obj-$(CONFIG_ARM_TANGO_CPUFREQ)		+= tango-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o

diff --git a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c
index 988ebc3..39e34f50 100644
--- a/drivers/cpufreq/armada-8k-cpufreq.c
+++ b/drivers/cpufreq/armada-8k-cpufreq.c

@@ -136,6 +136,8 @@ static int __init armada_8k_cpufreq_init(void)
 
 	nb_cpus = num_possible_cpus();
 	freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL);
+	if (!freq_tables)
+		return -ENOMEM;
 	cpumask_copy(&cpus, cpu_possible_mask);
 
 	/*

diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 03dc424..bca8d1f 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c

@@ -101,12 +101,15 @@ static const struct of_device_id whitelist[] __initconst = {
  * platforms using "operating-points-v2" property.
  */
 static const struct of_device_id blacklist[] __initconst = {
+	{ .compatible = "allwinner,sun50i-h6", },
+
 	{ .compatible = "calxeda,highbank", },
 	{ .compatible = "calxeda,ecx-2000", },
 
 	{ .compatible = "fsl,imx7d", },
 	{ .compatible = "fsl,imx8mq", },
 	{ .compatible = "fsl,imx8mm", },
+	{ .compatible = "fsl,imx8mn", },
 
 	{ .compatible = "marvell,armadaxp", },
 
@@ -117,12 +120,14 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "mediatek,mt817x", },
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
+	{ .compatible = "mediatek,mt8183", },
 
 	{ .compatible = "nvidia,tegra124", },
 	{ .compatible = "nvidia,tegra210", },
 
 	{ .compatible = "qcom,apq8096", },
 	{ .compatible = "qcom,msm8996", },
+	{ .compatible = "qcom,qcs404", },
 
 	{ .compatible = "st,stih407", },
 	{ .compatible = "st,stih410", },

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index c28ebf2..c52d6fa 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c

@@ -1266,7 +1266,17 @@ static void cpufreq_policy_free(struct cpufreq_policy *policy)
 				   DEV_PM_QOS_MAX_FREQUENCY);
 	dev_pm_qos_remove_notifier(dev, &policy->nb_min,
 				   DEV_PM_QOS_MIN_FREQUENCY);
-	dev_pm_qos_remove_request(policy->max_freq_req);
+
+	if (policy->max_freq_req) {
+		/*
+		 * CPUFREQ_CREATE_POLICY notification is sent only after
+		 * successfully adding max_freq_req request.
+		 */
+		blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+					     CPUFREQ_REMOVE_POLICY, policy);
+		dev_pm_qos_remove_request(policy->max_freq_req);
+	}
+
 	dev_pm_qos_remove_request(policy->min_freq_req);
 	kfree(policy->min_freq_req);
 
@@ -1391,6 +1401,9 @@ static int cpufreq_online(unsigned int cpu)
 				ret);
 			goto out_destroy_policy;
 		}
+
+		blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+				CPUFREQ_CREATE_POLICY, policy);
 	}
 
 	if (cpufreq_driver->get && has_target()) {
@@ -1807,8 +1820,8 @@ void cpufreq_suspend(void)
 		}
 
 		if (cpufreq_driver->suspend && cpufreq_driver->suspend(policy))
-			pr_err("%s: Failed to suspend driver: %p\n", __func__,
-				policy);
+			pr_err("%s: Failed to suspend driver: %s\n", __func__,
+				cpufreq_driver->name);
 	}
 
 suspend:
@@ -2140,7 +2153,7 @@ int cpufreq_driver_target(struct cpufreq_policy *policy,
 			  unsigned int target_freq,
 			  unsigned int relation)
 {
-	int ret = -EINVAL;
+	int ret;
 
 	down_write(&policy->rwsem);
 
@@ -2347,15 +2360,13 @@ EXPORT_SYMBOL(cpufreq_get_policy);
  * @policy: Policy object to modify.
  * @new_policy: New policy data.
  *
- * Pass @new_policy to the cpufreq driver's ->verify() callback, run the
- * installed policy notifiers for it with the CPUFREQ_ADJUST value, pass it to
- * the driver's ->verify() callback again and run the notifiers for it again
- * with the CPUFREQ_NOTIFY value.  Next, copy the min and max parameters
- * of @new_policy to @policy and either invoke the driver's ->setpolicy()
- * callback (if present) or carry out a governor update for @policy.  That is,
- * run the current governor's ->limits() callback (if the governor field in
- * @new_policy points to the same object as the one in @policy) or replace the
- * governor for @policy with the new one stored in @new_policy.
+ * Pass @new_policy to the cpufreq driver's ->verify() callback. Next, copy the
+ * min and max parameters of @new_policy to @policy and either invoke the
+ * driver's ->setpolicy() callback (if present) or carry out a governor update
+ * for @policy.  That is, run the current governor's ->limits() callback (if the
+ * governor field in @new_policy points to the same object as the one in
+ * @policy) or replace the governor for @policy with the new one stored in
+ * @new_policy.
  *
  * The cpuinfo part of @policy is not updated by this function.
  */
@@ -2383,26 +2394,6 @@ int cpufreq_set_policy(struct cpufreq_policy *policy,
 	if (ret)
 		return ret;
 
-	/*
-	 * The notifier-chain shall be removed once all the users of
-	 * CPUFREQ_ADJUST are moved to use the QoS framework.
-	 */
-	/* adjust if necessary - all reasons */
-	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
-			CPUFREQ_ADJUST, new_policy);
-
-	/*
-	 * verify the cpu speed can be set within this limit, which might be
-	 * different to the first one
-	 */
-	ret = cpufreq_driver->verify(new_policy);
-	if (ret)
-		return ret;
-
-	/* notification of the new policy */
-	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
-			CPUFREQ_NOTIFY, new_policy);
-
 	policy->min = new_policy->min;
 	policy->max = new_policy->max;
 	trace_cpu_frequency_limits(policy);

diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c
index 4f85f31..35db14c 100644
--- a/drivers/cpufreq/imx-cpufreq-dt.c
+++ b/drivers/cpufreq/imx-cpufreq-dt.c

@@ -16,6 +16,7 @@
 
 #define OCOTP_CFG3_SPEED_GRADE_SHIFT	8
 #define OCOTP_CFG3_SPEED_GRADE_MASK	(0x3 << 8)
+#define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK	(0xf << 8)
 #define OCOTP_CFG3_MKT_SEGMENT_SHIFT    6
 #define OCOTP_CFG3_MKT_SEGMENT_MASK     (0x3 << 6)
 
@@ -34,7 +35,12 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK) >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
+	if (of_machine_is_compatible("fsl,imx8mn"))
+		speed_grade = (cell_value & IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK)
+			      >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
+	else
+		speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK)
+			      >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
 	mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) >> OCOTP_CFG3_MKT_SEGMENT_SHIFT;
 
 	/*

diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index cc27d4c..32f2756 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c

@@ -24,6 +24,7 @@
 #include <linux/fs.h>
 #include <linux/acpi.h>
 #include <linux/vmalloc.h>
+#include <linux/pm_qos.h>
 #include <trace/events/power.h>
 
 #include <asm/div64.h>
@@ -1085,6 +1086,47 @@ static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b,
 	return count;
 }
 
+static struct cpufreq_driver intel_pstate;
+
+static void update_qos_request(enum dev_pm_qos_req_type type)
+{
+	int max_state, turbo_max, freq, i, perf_pct;
+	struct dev_pm_qos_request *req;
+	struct cpufreq_policy *policy;
+
+	for_each_possible_cpu(i) {
+		struct cpudata *cpu = all_cpu_data[i];
+
+		policy = cpufreq_cpu_get(i);
+		if (!policy)
+			continue;
+
+		req = policy->driver_data;
+		cpufreq_cpu_put(policy);
+
+		if (!req)
+			continue;
+
+		if (hwp_active)
+			intel_pstate_get_hwp_max(i, &turbo_max, &max_state);
+		else
+			turbo_max = cpu->pstate.turbo_pstate;
+
+		if (type == DEV_PM_QOS_MIN_FREQUENCY) {
+			perf_pct = global.min_perf_pct;
+		} else {
+			req++;
+			perf_pct = global.max_perf_pct;
+		}
+
+		freq = DIV_ROUND_UP(turbo_max * perf_pct, 100);
+		freq *= cpu->pstate.scaling;
+
+		if (dev_pm_qos_update_request(req, freq) < 0)
+			pr_warn("Failed to update freq constraint: CPU%d\n", i);
+	}
+}
+
 static ssize_t store_max_perf_pct(struct kobject *a, struct kobj_attribute *b,
 				  const char *buf, size_t count)
 {
@@ -1108,7 +1150,10 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct kobj_attribute *b,
 
 	mutex_unlock(&intel_pstate_limits_lock);
 
-	intel_pstate_update_policies();
+	if (intel_pstate_driver == &intel_pstate)
+		intel_pstate_update_policies();
+	else
+		update_qos_request(DEV_PM_QOS_MAX_FREQUENCY);
 
 	mutex_unlock(&intel_pstate_driver_lock);
 
@@ -1139,7 +1184,10 @@ static ssize_t store_min_perf_pct(struct kobject *a, struct kobj_attribute *b,
 
 	mutex_unlock(&intel_pstate_limits_lock);
 
-	intel_pstate_update_policies();
+	if (intel_pstate_driver == &intel_pstate)
+		intel_pstate_update_policies();
+	else
+		update_qos_request(DEV_PM_QOS_MIN_FREQUENCY);
 
 	mutex_unlock(&intel_pstate_driver_lock);
 
@@ -2332,8 +2380,16 @@ static unsigned int intel_cpufreq_fast_switch(struct cpufreq_policy *policy,
 
 static int intel_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
-	int ret = __intel_pstate_cpu_init(policy);
+	int max_state, turbo_max, min_freq, max_freq, ret;
+	struct dev_pm_qos_request *req;
+	struct cpudata *cpu;
+	struct device *dev;
 
+	dev = get_cpu_device(policy->cpu);
+	if (!dev)
+		return -ENODEV;
+
+	ret = __intel_pstate_cpu_init(policy);
 	if (ret)
 		return ret;
 
@@ -2342,7 +2398,63 @@ static int intel_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	/* This reflects the intel_pstate_get_cpu_pstates() setting. */
 	policy->cur = policy->cpuinfo.min_freq;
 
+	req = kcalloc(2, sizeof(*req), GFP_KERNEL);
+	if (!req) {
+		ret = -ENOMEM;
+		goto pstate_exit;
+	}
+
+	cpu = all_cpu_data[policy->cpu];
+
+	if (hwp_active)
+		intel_pstate_get_hwp_max(policy->cpu, &turbo_max, &max_state);
+	else
+		turbo_max = cpu->pstate.turbo_pstate;
+
+	min_freq = DIV_ROUND_UP(turbo_max * global.min_perf_pct, 100);
+	min_freq *= cpu->pstate.scaling;
+	max_freq = DIV_ROUND_UP(turbo_max * global.max_perf_pct, 100);
+	max_freq *= cpu->pstate.scaling;
+
+	ret = dev_pm_qos_add_request(dev, req, DEV_PM_QOS_MIN_FREQUENCY,
+				     min_freq);
+	if (ret < 0) {
+		dev_err(dev, "Failed to add min-freq constraint (%d)\n", ret);
+		goto free_req;
+	}
+
+	ret = dev_pm_qos_add_request(dev, req + 1, DEV_PM_QOS_MAX_FREQUENCY,
+				     max_freq);
+	if (ret < 0) {
+		dev_err(dev, "Failed to add max-freq constraint (%d)\n", ret);
+		goto remove_min_req;
+	}
+
+	policy->driver_data = req;
+
 	return 0;
+
+remove_min_req:
+	dev_pm_qos_remove_request(req);
+free_req:
+	kfree(req);
+pstate_exit:
+	intel_pstate_exit_perf_limits(policy);
+
+	return ret;
+}
+
+static int intel_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	struct dev_pm_qos_request *req;
+
+	req = policy->driver_data;
+
+	dev_pm_qos_remove_request(req + 1);
+	dev_pm_qos_remove_request(req);
+	kfree(req);
+
+	return intel_pstate_cpu_exit(policy);
 }
 
 static struct cpufreq_driver intel_cpufreq = {
@@ -2351,7 +2463,7 @@ static struct cpufreq_driver intel_cpufreq = {
 	.target		= intel_cpufreq_target,
 	.fast_switch	= intel_cpufreq_fast_switch,
 	.init		= intel_cpufreq_cpu_init,
-	.exit		= intel_pstate_cpu_exit,
+	.exit		= intel_cpufreq_cpu_exit,
 	.stop_cpu	= intel_cpufreq_stop_cpu,
 	.update_limits	= intel_pstate_update_limits,
 	.name		= "intel_cpufreq",

diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index f14f3a8..0c98dd0 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c

@@ -338,7 +338,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 		goto out_free_resources;
 	}
 
-	proc_reg = regulator_get_exclusive(cpu_dev, "proc");
+	proc_reg = regulator_get_optional(cpu_dev, "proc");
 	if (IS_ERR(proc_reg)) {
 		if (PTR_ERR(proc_reg) == -EPROBE_DEFER)
 			pr_warn("proc regulator for cpu%d not ready, retry.\n",
@@ -535,6 +535,8 @@ static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
 	{ .compatible = "mediatek,mt817x", },
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
+	{ .compatible = "mediatek,mt8183", },
+	{ .compatible = "mediatek,mt8516", },
 
 	{ }
 };

diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c
index b83f36f..c58abb4 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.c

@@ -110,6 +110,13 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
 #endif
 
 	policy->freq_table = cbe_freqs;
+	cbe_cpufreq_pmi_policy_init(policy);
+	return 0;
+}
+
+static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	cbe_cpufreq_pmi_policy_exit(policy);
 	return 0;
 }
 
@@ -129,6 +136,7 @@ static struct cpufreq_driver cbe_cpufreq_driver = {
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= cbe_cpufreq_target,
 	.init		= cbe_cpufreq_cpu_init,
+	.exit		= cbe_cpufreq_cpu_exit,
 	.name		= "cbe-cpufreq",
 	.flags		= CPUFREQ_CONST_LOOPS,
 };
@@ -139,15 +147,24 @@ static struct cpufreq_driver cbe_cpufreq_driver = {
 
 static int __init cbe_cpufreq_init(void)
 {
+	int ret;
+
 	if (!machine_is(cell))
 		return -ENODEV;
 
-	return cpufreq_register_driver(&cbe_cpufreq_driver);
+	cbe_cpufreq_pmi_init();
+
+	ret = cpufreq_register_driver(&cbe_cpufreq_driver);
+	if (ret)
+		cbe_cpufreq_pmi_exit();
+
+	return ret;
 }
 
 static void __exit cbe_cpufreq_exit(void)
 {
 	cpufreq_unregister_driver(&cbe_cpufreq_driver);
+	cbe_cpufreq_pmi_exit();
 }
 
 module_init(cbe_cpufreq_init);

diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.h b/drivers/cpufreq/ppc_cbe_cpufreq.h
index 9d97351..00cd863 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq.h
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.h

@@ -20,6 +20,14 @@ int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
 
 #if IS_ENABLED(CONFIG_CPU_FREQ_CBE_PMI)
 extern bool cbe_cpufreq_has_pmi;
+void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy);
+void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy);
+void cbe_cpufreq_pmi_init(void);
+void cbe_cpufreq_pmi_exit(void);
 #else
 #define cbe_cpufreq_has_pmi (0)
+static inline void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy) {}
+static inline void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy) {}
+static inline void cbe_cpufreq_pmi_init(void) {}
+static inline void cbe_cpufreq_pmi_exit(void) {}
 #endif

diff --git a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
index 97c8ee4..bc9dd30 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c

@@ -12,6 +12,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
+#include <linux/pm_qos.h>
 
 #include <asm/processor.h>
 #include <asm/prom.h>
@@ -24,8 +25,6 @@
 
 #include "ppc_cbe_cpufreq.h"
 
-static u8 pmi_slow_mode_limit[MAX_CBE];
-
 bool cbe_cpufreq_has_pmi = false;
 EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi);
 
@@ -65,64 +64,89 @@ EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi);
 
 static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg)
 {
+	struct cpufreq_policy *policy;
+	struct dev_pm_qos_request *req;
 	u8 node, slow_mode;
+	int cpu, ret;
 
 	BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE);
 
 	node = pmi_msg.data1;
 	slow_mode = pmi_msg.data2;
 
-	pmi_slow_mode_limit[node] = slow_mode;
+	cpu = cbe_node_to_cpu(node);
 
 	pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode);
-}
 
-static int pmi_notifier(struct notifier_block *nb,
-				       unsigned long event, void *data)
-{
-	struct cpufreq_policy *policy = data;
-	struct cpufreq_frequency_table *cbe_freqs = policy->freq_table;
-	u8 node;
-
-	/* Should this really be called for CPUFREQ_ADJUST and CPUFREQ_NOTIFY
-	 * policy events?)
-	 */
-	node = cbe_cpu_to_node(policy->cpu);
-
-	pr_debug("got notified, event=%lu, node=%u\n", event, node);
-
-	if (pmi_slow_mode_limit[node] != 0) {
-		pr_debug("limiting node %d to slow mode %d\n",
-			 node, pmi_slow_mode_limit[node]);
-
-		cpufreq_verify_within_limits(policy, 0,
-
-			cbe_freqs[pmi_slow_mode_limit[node]].frequency);
+	policy = cpufreq_cpu_get(cpu);
+	if (!policy) {
+		pr_warn("cpufreq policy not found cpu%d\n", cpu);
+		return;
 	}
 
-	return 0;
-}
+	req = policy->driver_data;
 
-static struct notifier_block pmi_notifier_block = {
-	.notifier_call = pmi_notifier,
-};
+	ret = dev_pm_qos_update_request(req,
+			policy->freq_table[slow_mode].frequency);
+	if (ret < 0)
+		pr_warn("Failed to update freq constraint: %d\n", ret);
+	else
+		pr_debug("limiting node %d to slow mode %d\n", node, slow_mode);
+
+	cpufreq_cpu_put(policy);
+}
 
 static struct pmi_handler cbe_pmi_handler = {
 	.type			= PMI_TYPE_FREQ_CHANGE,
 	.handle_pmi_message	= cbe_cpufreq_handle_pmi,
 };
 
-
-
-static int __init cbe_cpufreq_pmi_init(void)
+void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy)
 {
-	cbe_cpufreq_has_pmi = pmi_register_handler(&cbe_pmi_handler) == 0;
+	struct dev_pm_qos_request *req;
+	int ret;
 
 	if (!cbe_cpufreq_has_pmi)
-		return -ENODEV;
+		return;
 
-	cpufreq_register_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER);
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return;
 
-	return 0;
+	ret = dev_pm_qos_add_request(get_cpu_device(policy->cpu), req,
+				     DEV_PM_QOS_MAX_FREQUENCY,
+				     policy->freq_table[0].frequency);
+	if (ret < 0) {
+		pr_err("Failed to add freq constraint (%d)\n", ret);
+		kfree(req);
+		return;
+	}
+
+	policy->driver_data = req;
 }
-device_initcall(cbe_cpufreq_pmi_init);
+EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_policy_init);
+
+void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy)
+{
+	struct dev_pm_qos_request *req = policy->driver_data;
+
+	if (cbe_cpufreq_has_pmi) {
+		dev_pm_qos_remove_request(req);
+		kfree(req);
+	}
+}
+EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_policy_exit);
+
+void cbe_cpufreq_pmi_init(void)
+{
+	if (!pmi_register_handler(&cbe_pmi_handler))
+		cbe_cpufreq_has_pmi = true;
+}
+EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_init);
+
+void cbe_cpufreq_pmi_exit(void)
+{
+	pmi_unregister_handler(&cbe_pmi_handler);
+	cbe_cpufreq_has_pmi = false;
+}
+EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_exit);

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 4b0b504..a9ae2f8 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c

@@ -20,6 +20,7 @@
 #define LUT_VOLT			GENMASK(11, 0)
 #define LUT_ROW_SIZE			32
 #define CLK_HW_DIV			2
+#define LUT_TURBO_IND			1
 
 /* Register offsets */
 #define REG_ENABLE			0x0
@@ -34,9 +35,12 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
 					unsigned int index)
 {
 	void __iomem *perf_state_reg = policy->driver_data;
+	unsigned long freq = policy->freq_table[index].frequency;
 
 	writel_relaxed(index, perf_state_reg);
 
+	arch_set_freq_scale(policy->related_cpus, freq,
+			    policy->cpuinfo.max_freq);
 	return 0;
 }
 
@@ -63,6 +67,7 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
 {
 	void __iomem *perf_state_reg = policy->driver_data;
 	int index;
+	unsigned long freq;
 
 	index = policy->cached_resolved_idx;
 	if (index < 0)
@@ -70,16 +75,19 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
 
 	writel_relaxed(index, perf_state_reg);
 
-	return policy->freq_table[index].frequency;
+	freq = policy->freq_table[index].frequency;
+	arch_set_freq_scale(policy->related_cpus, freq,
+			    policy->cpuinfo.max_freq);
+
+	return freq;
 }
 
 static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 				    struct cpufreq_policy *policy,
 				    void __iomem *base)
 {
-	u32 data, src, lval, i, core_count, prev_cc = 0, prev_freq = 0, freq;
+	u32 data, src, lval, i, core_count, prev_freq = 0, freq;
 	u32 volt;
-	unsigned int max_cores = cpumask_weight(policy->cpus);
 	struct cpufreq_frequency_table	*table;
 
 	table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
@@ -102,12 +110,12 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 		else
 			freq = cpu_hw_rate / 1000;
 
-		if (freq != prev_freq && core_count == max_cores) {
+		if (freq != prev_freq && core_count != LUT_TURBO_IND) {
 			table[i].frequency = freq;
 			dev_pm_opp_add(cpu_dev, freq * 1000, volt);
 			dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
 				freq, core_count);
-		} else {
+		} else if (core_count == LUT_TURBO_IND) {
 			table[i].frequency = CPUFREQ_ENTRY_INVALID;
 		}
 
@@ -115,14 +123,14 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 		 * Two of the same frequencies with the same core counts means
 		 * end of table
 		 */
-		if (i > 0 && prev_freq == freq && prev_cc == core_count) {
+		if (i > 0 && prev_freq == freq) {
 			struct cpufreq_frequency_table *prev = &table[i - 1];
 
 			/*
 			 * Only treat the last frequency that might be a boost
 			 * as the boost frequency
 			 */
-			if (prev_cc != max_cores) {
+			if (prev->frequency == CPUFREQ_ENTRY_INVALID) {
 				prev->frequency = prev_freq;
 				prev->flags = CPUFREQ_BOOST_FREQ;
 				dev_pm_opp_add(cpu_dev,	prev_freq * 1000, volt);
@@ -131,7 +139,6 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 			break;
 		}
 
-		prev_cc = core_count;
 		prev_freq = freq;
 	}
 

diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-kryo.c
deleted file mode 100644
index dd64dcf..0000000
--- a/drivers/cpufreq/qcom-cpufreq-kryo.c
+++ /dev/null

@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-/*
- * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
- * the CPU frequency subset and voltage value of each OPP varies
- * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
- * defines the voltage and frequency value based on the msm-id in SMEM
- * and speedbin blown in the efuse combination.
- * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
- * to provide the OPP framework with required information.
- * This is used to determine the voltage and frequency value for each OPP of
- * operating-points-v2 table when it is parsed by the OPP framework.
- */
-
-#include <linux/cpu.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/pm_opp.h>
-#include <linux/slab.h>
-#include <linux/soc/qcom/smem.h>
-
-#define MSM_ID_SMEM	137
-
-enum _msm_id {
-	MSM8996V3 = 0xF6ul,
-	APQ8096V3 = 0x123ul,
-	MSM8996SG = 0x131ul,
-	APQ8096SG = 0x138ul,
-};
-
-enum _msm8996_version {
-	MSM8996_V3,
-	MSM8996_SG,
-	NUM_OF_MSM8996_VERSIONS,
-};
-
-static struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev;
-
-static enum _msm8996_version qcom_cpufreq_kryo_get_msm_id(void)
-{
-	size_t len;
-	u32 *msm_id;
-	enum _msm8996_version version;
-
-	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
-	if (IS_ERR(msm_id))
-		return NUM_OF_MSM8996_VERSIONS;
-
-	/* The first 4 bytes are format, next to them is the actual msm-id */
-	msm_id++;
-
-	switch ((enum _msm_id)*msm_id) {
-	case MSM8996V3:
-	case APQ8096V3:
-		version = MSM8996_V3;
-		break;
-	case MSM8996SG:
-	case APQ8096SG:
-		version = MSM8996_SG;
-		break;
-	default:
-		version = NUM_OF_MSM8996_VERSIONS;
-	}
-
-	return version;
-}
-
-static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
-{
-	struct opp_table **opp_tables;
-	enum _msm8996_version msm8996_version;
-	struct nvmem_cell *speedbin_nvmem;
-	struct device_node *np;
-	struct device *cpu_dev;
-	unsigned cpu;
-	u8 *speedbin;
-	u32 versions;
-	size_t len;
-	int ret;
-
-	cpu_dev = get_cpu_device(0);
-	if (!cpu_dev)
-		return -ENODEV;
-
-	msm8996_version = qcom_cpufreq_kryo_get_msm_id();
-	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
-		dev_err(cpu_dev, "Not Snapdragon 820/821!");
-		return -ENODEV;
-	}
-
-	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
-	if (!np)
-		return -ENOENT;
-
-	ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
-	if (!ret) {
-		of_node_put(np);
-		return -ENOENT;
-	}
-
-	speedbin_nvmem = of_nvmem_cell_get(np, NULL);
-	of_node_put(np);
-	if (IS_ERR(speedbin_nvmem)) {
-		if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
-			dev_err(cpu_dev, "Could not get nvmem cell: %ld\n",
-				PTR_ERR(speedbin_nvmem));
-		return PTR_ERR(speedbin_nvmem);
-	}
-
-	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
-	nvmem_cell_put(speedbin_nvmem);
-	if (IS_ERR(speedbin))
-		return PTR_ERR(speedbin);
-
-	switch (msm8996_version) {
-	case MSM8996_V3:
-		versions = 1 << (unsigned int)(*speedbin);
-		break;
-	case MSM8996_SG:
-		versions = 1 << ((unsigned int)(*speedbin) + 4);
-		break;
-	default:
-		BUG();
-		break;
-	}
-	kfree(speedbin);
-
-	opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), GFP_KERNEL);
-	if (!opp_tables)
-		return -ENOMEM;
-
-	for_each_possible_cpu(cpu) {
-		cpu_dev = get_cpu_device(cpu);
-		if (NULL == cpu_dev) {
-			ret = -ENODEV;
-			goto free_opp;
-		}
-
-		opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
-							      &versions, 1);
-		if (IS_ERR(opp_tables[cpu])) {
-			ret = PTR_ERR(opp_tables[cpu]);
-			dev_err(cpu_dev, "Failed to set supported hardware\n");
-			goto free_opp;
-		}
-	}
-
-	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
-							  NULL, 0);
-	if (!IS_ERR(cpufreq_dt_pdev)) {
-		platform_set_drvdata(pdev, opp_tables);
-		return 0;
-	}
-
-	ret = PTR_ERR(cpufreq_dt_pdev);
-	dev_err(cpu_dev, "Failed to register platform device\n");
-
-free_opp:
-	for_each_possible_cpu(cpu) {
-		if (IS_ERR_OR_NULL(opp_tables[cpu]))
-			break;
-		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
-	}
-	kfree(opp_tables);
-
-	return ret;
-}
-
-static int qcom_cpufreq_kryo_remove(struct platform_device *pdev)
-{
-	struct opp_table **opp_tables = platform_get_drvdata(pdev);
-	unsigned int cpu;
-
-	platform_device_unregister(cpufreq_dt_pdev);
-
-	for_each_possible_cpu(cpu)
-		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
-
-	kfree(opp_tables);
-
-	return 0;
-}
-
-static struct platform_driver qcom_cpufreq_kryo_driver = {
-	.probe = qcom_cpufreq_kryo_probe,
-	.remove = qcom_cpufreq_kryo_remove,
-	.driver = {
-		.name = "qcom-cpufreq-kryo",
-	},
-};
-
-static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = {
-	{ .compatible = "qcom,apq8096", },
-	{ .compatible = "qcom,msm8996", },
-	{}
-};
-
-/*
- * Since the driver depends on smem and nvmem drivers, which may
- * return EPROBE_DEFER, all the real activity is done in the probe,
- * which may be defered as well. The init here is only registering
- * the driver and the platform device.
- */
-static int __init qcom_cpufreq_kryo_init(void)
-{
-	struct device_node *np = of_find_node_by_path("/");
-	const struct of_device_id *match;
-	int ret;
-
-	if (!np)
-		return -ENODEV;
-
-	match = of_match_node(qcom_cpufreq_kryo_match_list, np);
-	of_node_put(np);
-	if (!match)
-		return -ENODEV;
-
-	ret = platform_driver_register(&qcom_cpufreq_kryo_driver);
-	if (unlikely(ret < 0))
-		return ret;
-
-	kryo_cpufreq_pdev = platform_device_register_simple(
-		"qcom-cpufreq-kryo", -1, NULL, 0);
-	ret = PTR_ERR_OR_ZERO(kryo_cpufreq_pdev);
-	if (0 == ret)
-		return 0;
-
-	platform_driver_unregister(&qcom_cpufreq_kryo_driver);
-	return ret;
-}
-module_init(qcom_cpufreq_kryo_init);
-
-static void __exit qcom_cpufreq_kryo_exit(void)
-{
-	platform_device_unregister(kryo_cpufreq_pdev);
-	platform_driver_unregister(&qcom_cpufreq_kryo_driver);
-}
-module_exit(qcom_cpufreq_kryo_exit);
-
-MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver");
-MODULE_LICENSE("GPL v2");

diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
new file mode 100644
index 0000000..f0d2d50
--- /dev/null
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c

@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+/*
+ * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
+ * the CPU frequency subset and voltage value of each OPP varies
+ * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
+ * defines the voltage and frequency value based on the msm-id in SMEM
+ * and speedbin blown in the efuse combination.
+ * The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
+ * to provide the OPP framework with required information.
+ * This is used to determine the voltage and frequency value for each OPP of
+ * operating-points-v2 table when it is parsed by the OPP framework.
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smem.h>
+
+#define MSM_ID_SMEM	137
+
+enum _msm_id {
+	MSM8996V3 = 0xF6ul,
+	APQ8096V3 = 0x123ul,
+	MSM8996SG = 0x131ul,
+	APQ8096SG = 0x138ul,
+};
+
+enum _msm8996_version {
+	MSM8996_V3,
+	MSM8996_SG,
+	NUM_OF_MSM8996_VERSIONS,
+};
+
+struct qcom_cpufreq_drv;
+
+struct qcom_cpufreq_match_data {
+	int (*get_version)(struct device *cpu_dev,
+			   struct nvmem_cell *speedbin_nvmem,
+			   struct qcom_cpufreq_drv *drv);
+	const char **genpd_names;
+};
+
+struct qcom_cpufreq_drv {
+	struct opp_table **opp_tables;
+	struct opp_table **genpd_opp_tables;
+	u32 versions;
+	const struct qcom_cpufreq_match_data *data;
+};
+
+static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
+
+static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
+{
+	size_t len;
+	u32 *msm_id;
+	enum _msm8996_version version;
+
+	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
+	if (IS_ERR(msm_id))
+		return NUM_OF_MSM8996_VERSIONS;
+
+	/* The first 4 bytes are format, next to them is the actual msm-id */
+	msm_id++;
+
+	switch ((enum _msm_id)*msm_id) {
+	case MSM8996V3:
+	case APQ8096V3:
+		version = MSM8996_V3;
+		break;
+	case MSM8996SG:
+	case APQ8096SG:
+		version = MSM8996_SG;
+		break;
+	default:
+		version = NUM_OF_MSM8996_VERSIONS;
+	}
+
+	return version;
+}
+
+static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
+					  struct nvmem_cell *speedbin_nvmem,
+					  struct qcom_cpufreq_drv *drv)
+{
+	size_t len;
+	u8 *speedbin;
+	enum _msm8996_version msm8996_version;
+
+	msm8996_version = qcom_cpufreq_get_msm_id();
+	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
+		dev_err(cpu_dev, "Not Snapdragon 820/821!");
+		return -ENODEV;
+	}
+
+	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+	if (IS_ERR(speedbin))
+		return PTR_ERR(speedbin);
+
+	switch (msm8996_version) {
+	case MSM8996_V3:
+		drv->versions = 1 << (unsigned int)(*speedbin);
+		break;
+	case MSM8996_SG:
+		drv->versions = 1 << ((unsigned int)(*speedbin) + 4);
+		break;
+	default:
+		BUG();
+		break;
+	}
+
+	kfree(speedbin);
+	return 0;
+}
+
+static const struct qcom_cpufreq_match_data match_data_kryo = {
+	.get_version = qcom_cpufreq_kryo_name_version,
+};
+
+static const char *qcs404_genpd_names[] = { "cpr", NULL };
+
+static const struct qcom_cpufreq_match_data match_data_qcs404 = {
+	.genpd_names = qcs404_genpd_names,
+};
+
+static int qcom_cpufreq_probe(struct platform_device *pdev)
+{
+	struct qcom_cpufreq_drv *drv;
+	struct nvmem_cell *speedbin_nvmem;
+	struct device_node *np;
+	struct device *cpu_dev;
+	unsigned cpu;
+	const struct of_device_id *match;
+	int ret;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev)
+		return -ENODEV;
+
+	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+	if (!np)
+		return -ENOENT;
+
+	ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
+	if (!ret) {
+		of_node_put(np);
+		return -ENOENT;
+	}
+
+	drv = kzalloc(sizeof(*drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	match = pdev->dev.platform_data;
+	drv->data = match->data;
+	if (!drv->data) {
+		ret = -ENODEV;
+		goto free_drv;
+	}
+
+	if (drv->data->get_version) {
+		speedbin_nvmem = of_nvmem_cell_get(np, NULL);
+		if (IS_ERR(speedbin_nvmem)) {
+			if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
+				dev_err(cpu_dev,
+					"Could not get nvmem cell: %ld\n",
+					PTR_ERR(speedbin_nvmem));
+			ret = PTR_ERR(speedbin_nvmem);
+			goto free_drv;
+		}
+
+		ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv);
+		if (ret) {
+			nvmem_cell_put(speedbin_nvmem);
+			goto free_drv;
+		}
+		nvmem_cell_put(speedbin_nvmem);
+	}
+	of_node_put(np);
+
+	drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables),
+				  GFP_KERNEL);
+	if (!drv->opp_tables) {
+		ret = -ENOMEM;
+		goto free_drv;
+	}
+
+	drv->genpd_opp_tables = kcalloc(num_possible_cpus(),
+					sizeof(*drv->genpd_opp_tables),
+					GFP_KERNEL);
+	if (!drv->genpd_opp_tables) {
+		ret = -ENOMEM;
+		goto free_opp;
+	}
+
+	for_each_possible_cpu(cpu) {
+		cpu_dev = get_cpu_device(cpu);
+		if (NULL == cpu_dev) {
+			ret = -ENODEV;
+			goto free_genpd_opp;
+		}
+
+		if (drv->data->get_version) {
+			drv->opp_tables[cpu] =
+				dev_pm_opp_set_supported_hw(cpu_dev,
+							    &drv->versions, 1);
+			if (IS_ERR(drv->opp_tables[cpu])) {
+				ret = PTR_ERR(drv->opp_tables[cpu]);
+				dev_err(cpu_dev,
+					"Failed to set supported hardware\n");
+				goto free_genpd_opp;
+			}
+		}
+
+		if (drv->data->genpd_names) {
+			drv->genpd_opp_tables[cpu] =
+				dev_pm_opp_attach_genpd(cpu_dev,
+							drv->data->genpd_names,
+							NULL);
+			if (IS_ERR(drv->genpd_opp_tables[cpu])) {
+				ret = PTR_ERR(drv->genpd_opp_tables[cpu]);
+				if (ret != -EPROBE_DEFER)
+					dev_err(cpu_dev,
+						"Could not attach to pm_domain: %d\n",
+						ret);
+				goto free_genpd_opp;
+			}
+		}
+	}
+
+	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
+							  NULL, 0);
+	if (!IS_ERR(cpufreq_dt_pdev)) {
+		platform_set_drvdata(pdev, drv);
+		return 0;
+	}
+
+	ret = PTR_ERR(cpufreq_dt_pdev);
+	dev_err(cpu_dev, "Failed to register platform device\n");
+
+free_genpd_opp:
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(drv->genpd_opp_tables[cpu]))
+			break;
+		dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
+	}
+	kfree(drv->genpd_opp_tables);
+free_opp:
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(drv->opp_tables[cpu]))
+			break;
+		dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+	}
+	kfree(drv->opp_tables);
+free_drv:
+	kfree(drv);
+
+	return ret;
+}
+
+static int qcom_cpufreq_remove(struct platform_device *pdev)
+{
+	struct qcom_cpufreq_drv *drv = platform_get_drvdata(pdev);
+	unsigned int cpu;
+
+	platform_device_unregister(cpufreq_dt_pdev);
+
+	for_each_possible_cpu(cpu) {
+		if (drv->opp_tables[cpu])
+			dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+		if (drv->genpd_opp_tables[cpu])
+			dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
+	}
+
+	kfree(drv->opp_tables);
+	kfree(drv->genpd_opp_tables);
+	kfree(drv);
+
+	return 0;
+}
+
+static struct platform_driver qcom_cpufreq_driver = {
+	.probe = qcom_cpufreq_probe,
+	.remove = qcom_cpufreq_remove,
+	.driver = {
+		.name = "qcom-cpufreq-nvmem",
+	},
+};
+
+static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
+	{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
+	{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
+	{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
+	{},
+};
+
+/*
+ * Since the driver depends on smem and nvmem drivers, which may
+ * return EPROBE_DEFER, all the real activity is done in the probe,
+ * which may be defered as well. The init here is only registering
+ * the driver and the platform device.
+ */
+static int __init qcom_cpufreq_init(void)
+{
+	struct device_node *np = of_find_node_by_path("/");
+	const struct of_device_id *match;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	match = of_match_node(qcom_cpufreq_match_list, np);
+	of_node_put(np);
+	if (!match)
+		return -ENODEV;
+
+	ret = platform_driver_register(&qcom_cpufreq_driver);
+	if (unlikely(ret < 0))
+		return ret;
+
+	cpufreq_pdev = platform_device_register_data(NULL, "qcom-cpufreq-nvmem",
+						     -1, match, sizeof(*match));
+	ret = PTR_ERR_OR_ZERO(cpufreq_pdev);
+	if (0 == ret)
+		return 0;
+
+	platform_driver_unregister(&qcom_cpufreq_driver);
+	return ret;
+}
+module_init(qcom_cpufreq_init);
+
+static void __exit qcom_cpufreq_exit(void)
+{
+	platform_device_unregister(cpufreq_pdev);
+	platform_driver_unregister(&qcom_cpufreq_driver);
+}
+module_exit(qcom_cpufreq_exit);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. CPUfreq driver");
+MODULE_LICENSE("GPL v2");

diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
new file mode 100644
index 0000000..eca32e4
--- /dev/null
+++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c

@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Allwinner CPUFreq nvmem based driver
+ *
+ * The sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to
+ * provide the OPP framework with required information.
+ *
+ * Copyright (C) 2019 Yangtao Li <tiny.windzz@gmail.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+
+#define MAX_NAME_LEN	7
+
+#define NVMEM_MASK	0x7
+#define NVMEM_SHIFT	5
+
+static struct platform_device *cpufreq_dt_pdev, *sun50i_cpufreq_pdev;
+
+/**
+ * sun50i_cpufreq_get_efuse() - Parse and return efuse value present on SoC
+ * @versions: Set to the value parsed from efuse
+ *
+ * Returns 0 if success.
+ */
+static int sun50i_cpufreq_get_efuse(u32 *versions)
+{
+	struct nvmem_cell *speedbin_nvmem;
+	struct device_node *np;
+	struct device *cpu_dev;
+	u32 *speedbin, efuse_value;
+	size_t len;
+	int ret;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev)
+		return -ENODEV;
+
+	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+	if (!np)
+		return -ENOENT;
+
+	ret = of_device_is_compatible(np,
+				      "allwinner,sun50i-h6-operating-points");
+	if (!ret) {
+		of_node_put(np);
+		return -ENOENT;
+	}
+
+	speedbin_nvmem = of_nvmem_cell_get(np, NULL);
+	of_node_put(np);
+	if (IS_ERR(speedbin_nvmem)) {
+		if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
+			pr_err("Could not get nvmem cell: %ld\n",
+			       PTR_ERR(speedbin_nvmem));
+		return PTR_ERR(speedbin_nvmem);
+	}
+
+	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+	nvmem_cell_put(speedbin_nvmem);
+	if (IS_ERR(speedbin))
+		return PTR_ERR(speedbin);
+
+	efuse_value = (*speedbin >> NVMEM_SHIFT) & NVMEM_MASK;
+	switch (efuse_value) {
+	case 0b0001:
+		*versions = 1;
+		break;
+	case 0b0011:
+		*versions = 2;
+		break;
+	default:
+		/*
+		 * For other situations, we treat it as bin0.
+		 * This vf table can be run for any good cpu.
+		 */
+		*versions = 0;
+		break;
+	}
+
+	kfree(speedbin);
+	return 0;
+};
+
+static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
+{
+	struct opp_table **opp_tables;
+	char name[MAX_NAME_LEN];
+	unsigned int cpu;
+	u32 speed = 0;
+	int ret;
+
+	opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables),
+			     GFP_KERNEL);
+	if (!opp_tables)
+		return -ENOMEM;
+
+	ret = sun50i_cpufreq_get_efuse(&speed);
+	if (ret)
+		return ret;
+
+	snprintf(name, MAX_NAME_LEN, "speed%d", speed);
+
+	for_each_possible_cpu(cpu) {
+		struct device *cpu_dev = get_cpu_device(cpu);
+
+		if (!cpu_dev) {
+			ret = -ENODEV;
+			goto free_opp;
+		}
+
+		opp_tables[cpu] = dev_pm_opp_set_prop_name(cpu_dev, name);
+		if (IS_ERR(opp_tables[cpu])) {
+			ret = PTR_ERR(opp_tables[cpu]);
+			pr_err("Failed to set prop name\n");
+			goto free_opp;
+		}
+	}
+
+	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
+							  NULL, 0);
+	if (!IS_ERR(cpufreq_dt_pdev)) {
+		platform_set_drvdata(pdev, opp_tables);
+		return 0;
+	}
+
+	ret = PTR_ERR(cpufreq_dt_pdev);
+	pr_err("Failed to register platform device\n");
+
+free_opp:
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(opp_tables[cpu]))
+			break;
+		dev_pm_opp_put_prop_name(opp_tables[cpu]);
+	}
+	kfree(opp_tables);
+
+	return ret;
+}
+
+static int sun50i_cpufreq_nvmem_remove(struct platform_device *pdev)
+{
+	struct opp_table **opp_tables = platform_get_drvdata(pdev);
+	unsigned int cpu;
+
+	platform_device_unregister(cpufreq_dt_pdev);
+
+	for_each_possible_cpu(cpu)
+		dev_pm_opp_put_prop_name(opp_tables[cpu]);
+
+	kfree(opp_tables);
+
+	return 0;
+}
+
+static struct platform_driver sun50i_cpufreq_driver = {
+	.probe = sun50i_cpufreq_nvmem_probe,
+	.remove = sun50i_cpufreq_nvmem_remove,
+	.driver = {
+		.name = "sun50i-cpufreq-nvmem",
+	},
+};
+
+static const struct of_device_id sun50i_cpufreq_match_list[] = {
+	{ .compatible = "allwinner,sun50i-h6" },
+	{}
+};
+
+static const struct of_device_id *sun50i_cpufreq_match_node(void)
+{
+	const struct of_device_id *match;
+	struct device_node *np;
+
+	np = of_find_node_by_path("/");
+	match = of_match_node(sun50i_cpufreq_match_list, np);
+	of_node_put(np);
+
+	return match;
+}
+
+/*
+ * Since the driver depends on nvmem drivers, which may return EPROBE_DEFER,
+ * all the real activity is done in the probe, which may be defered as well.
+ * The init here is only registering the driver and the platform device.
+ */
+static int __init sun50i_cpufreq_init(void)
+{
+	const struct of_device_id *match;
+	int ret;
+
+	match = sun50i_cpufreq_match_node();
+	if (!match)
+		return -ENODEV;
+
+	ret = platform_driver_register(&sun50i_cpufreq_driver);
+	if (unlikely(ret < 0))
+		return ret;
+
+	sun50i_cpufreq_pdev =
+		platform_device_register_simple("sun50i-cpufreq-nvmem",
+						-1, NULL, 0);
+	ret = PTR_ERR_OR_ZERO(sun50i_cpufreq_pdev);
+	if (ret == 0)
+		return 0;
+
+	platform_driver_unregister(&sun50i_cpufreq_driver);
+	return ret;
+}
+module_init(sun50i_cpufreq_init);
+
+static void __exit sun50i_cpufreq_exit(void)
+{
+	platform_device_unregister(sun50i_cpufreq_pdev);
+	platform_driver_unregister(&sun50i_cpufreq_driver);
+}
+module_exit(sun50i_cpufreq_exit);
+
+MODULE_DESCRIPTION("Sun50i-h6 cpufreq driver");
+MODULE_LICENSE("GPL v2");

diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index 2ad1ae1..aeaa883 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c

@@ -77,6 +77,7 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
 	case DRA7_EFUSE_HAS_ALL_MPU_OPP:
 	case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
 		calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
+		/* Fall through */
 	case DRA7_EFUSE_HAS_OD_MPU_OPP:
 		calculated_efuse |= DRA7_EFUSE_OD_MPU_OPP;
 	}

diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index a4ac31e..88727b7 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig

@@ -33,6 +33,17 @@
 	  Some workloads benefit from using it and it generally should be safe
 	  to use.  Say Y here if you are not happy with the alternatives.
 
+config CPU_IDLE_GOV_HALTPOLL
+	bool "Haltpoll governor (for virtualized systems)"
+	depends on KVM_GUEST
+	help
+	  This governor implements haltpoll idle state selection, to be
+	  used in conjunction with the haltpoll cpuidle driver, allowing
+	  for polling for a certain amount of time before entering idle
+	  state.
+
+	  Some virtualized workloads benefit from using it.
+
 config DT_IDLE_STATES
 	bool
 
@@ -51,6 +62,15 @@
 source "drivers/cpuidle/Kconfig.powerpc"
 endmenu
 
+config HALTPOLL_CPUIDLE
+       tristate "Halt poll cpuidle driver"
+       depends on X86 && KVM_GUEST
+       default y
+       help
+         This option enables halt poll cpuidle driver, which allows to poll
+         before halting in the guest (more efficient than polling in the
+         host via halt_poll_ns for some scenarios).
+
 endif
 
 config ARCH_NEEDS_CPU_IDLE_COUPLED

diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 9d7176c..2402274 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile

@@ -7,6 +7,7 @@
 obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
 obj-$(CONFIG_DT_IDLE_STATES)		  += dt_idle_states.o
 obj-$(CONFIG_ARCH_HAS_CPU_RELAX)	  += poll_state.o
+obj-$(CONFIG_HALTPOLL_CPUIDLE)		  += cpuidle-haltpoll.o
 
 ##################################################################################
 # ARM SoC drivers

diff --git a/drivers/cpuidle/cpuidle-haltpoll.c b/drivers/cpuidle/cpuidle-haltpoll.c
new file mode 100644
index 0000000..932390b
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-haltpoll.c

@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cpuidle driver for haltpoll governor.
+ *
+ * Copyright 2019 Red Hat, Inc. and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ * Authors: Marcelo Tosatti <mtosatti@redhat.com>
+ */
+
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <linux/sched/idle.h>
+#include <linux/kvm_para.h>
+#include <linux/cpuidle_haltpoll.h>
+
+static struct cpuidle_device __percpu *haltpoll_cpuidle_devices;
+static enum cpuhp_state haltpoll_hp_state;
+
+static int default_enter_idle(struct cpuidle_device *dev,
+			      struct cpuidle_driver *drv, int index)
+{
+	if (current_clr_polling_and_test()) {
+		local_irq_enable();
+		return index;
+	}
+	default_idle();
+	return index;
+}
+
+static struct cpuidle_driver haltpoll_driver = {
+	.name = "haltpoll",
+	.governor = "haltpoll",
+	.states = {
+		{ /* entry 0 is for polling */ },
+		{
+			.enter			= default_enter_idle,
+			.exit_latency		= 1,
+			.target_residency	= 1,
+			.power_usage		= -1,
+			.name			= "haltpoll idle",
+			.desc			= "default architecture idle",
+		},
+	},
+	.safe_state_index = 0,
+	.state_count = 2,
+};
+
+static int haltpoll_cpu_online(unsigned int cpu)
+{
+	struct cpuidle_device *dev;
+
+	dev = per_cpu_ptr(haltpoll_cpuidle_devices, cpu);
+	if (!dev->registered) {
+		dev->cpu = cpu;
+		if (cpuidle_register_device(dev)) {
+			pr_notice("cpuidle_register_device %d failed!\n", cpu);
+			return -EIO;
+		}
+		arch_haltpoll_enable(cpu);
+	}
+
+	return 0;
+}
+
+static int haltpoll_cpu_offline(unsigned int cpu)
+{
+	struct cpuidle_device *dev;
+
+	dev = per_cpu_ptr(haltpoll_cpuidle_devices, cpu);
+	if (dev->registered) {
+		arch_haltpoll_disable(cpu);
+		cpuidle_unregister_device(dev);
+	}
+
+	return 0;
+}
+
+static void haltpoll_uninit(void)
+{
+	if (haltpoll_hp_state)
+		cpuhp_remove_state(haltpoll_hp_state);
+	cpuidle_unregister_driver(&haltpoll_driver);
+
+	free_percpu(haltpoll_cpuidle_devices);
+	haltpoll_cpuidle_devices = NULL;
+}
+
+static int __init haltpoll_init(void)
+{
+	int ret;
+	struct cpuidle_driver *drv = &haltpoll_driver;
+
+	cpuidle_poll_state_init(drv);
+
+	if (!kvm_para_available() ||
+		!kvm_para_has_hint(KVM_HINTS_REALTIME))
+		return -ENODEV;
+
+	ret = cpuidle_register_driver(drv);
+	if (ret < 0)
+		return ret;
+
+	haltpoll_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+	if (haltpoll_cpuidle_devices == NULL) {
+		cpuidle_unregister_driver(drv);
+		return -ENOMEM;
+	}
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "cpuidle/haltpoll:online",
+				haltpoll_cpu_online, haltpoll_cpu_offline);
+	if (ret < 0) {
+		haltpoll_uninit();
+	} else {
+		haltpoll_hp_state = ret;
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static void __exit haltpoll_exit(void)
+{
+	haltpoll_uninit();
+}
+
+module_init(haltpoll_init);
+module_exit(haltpoll_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marcelo Tosatti <mtosatti@redhat.com>");

diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 0f4b7c4..0895b98 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c

@@ -362,6 +362,36 @@ void cpuidle_reflect(struct cpuidle_device *dev, int index)
 }
 
 /**
+ * cpuidle_poll_time - return amount of time to poll for,
+ * governors can override dev->poll_limit_ns if necessary
+ *
+ * @drv:   the cpuidle driver tied with the cpu
+ * @dev:   the cpuidle device
+ *
+ */
+u64 cpuidle_poll_time(struct cpuidle_driver *drv,
+		      struct cpuidle_device *dev)
+{
+	int i;
+	u64 limit_ns;
+
+	if (dev->poll_limit_ns)
+		return dev->poll_limit_ns;
+
+	limit_ns = TICK_NSEC;
+	for (i = 1; i < drv->state_count; i++) {
+		if (drv->states[i].disabled || dev->states_usage[i].disable)
+			continue;
+
+		limit_ns = (u64)drv->states[i].target_residency * NSEC_PER_USEC;
+	}
+
+	dev->poll_limit_ns = limit_ns;
+
+	return dev->poll_limit_ns;
+}
+
+/**
  * cpuidle_install_idle_handler - installs the cpuidle idle loop handler
  */
 void cpuidle_install_idle_handler(void)

diff --git a/drivers/cpuidle/cpuidle.h b/drivers/cpuidle/cpuidle.h
index d661310..9f336af 100644
--- a/drivers/cpuidle/cpuidle.h
+++ b/drivers/cpuidle/cpuidle.h

@@ -9,6 +9,7 @@
 /* For internal use only */
 extern char param_governor[];
 extern struct cpuidle_governor *cpuidle_curr_governor;
+extern struct cpuidle_governor *cpuidle_prev_governor;
 extern struct list_head cpuidle_governors;
 extern struct list_head cpuidle_detected_devices;
 extern struct mutex cpuidle_lock;
@@ -22,6 +23,7 @@ extern void cpuidle_install_idle_handler(void);
 extern void cpuidle_uninstall_idle_handler(void);
 
 /* governors */
+extern struct cpuidle_governor *cpuidle_find_governor(const char *str);
 extern int cpuidle_switch_governor(struct cpuidle_governor *gov);
 
 /* sysfs */

diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index dc32f34..80c1a83 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c

@@ -254,12 +254,25 @@ static void __cpuidle_unregister_driver(struct cpuidle_driver *drv)
  */
 int cpuidle_register_driver(struct cpuidle_driver *drv)
 {
+	struct cpuidle_governor *gov;
 	int ret;
 
 	spin_lock(&cpuidle_driver_lock);
 	ret = __cpuidle_register_driver(drv);
 	spin_unlock(&cpuidle_driver_lock);
 
+	if (!ret && !strlen(param_governor) && drv->governor &&
+	    (cpuidle_get_driver() == drv)) {
+		mutex_lock(&cpuidle_lock);
+		gov = cpuidle_find_governor(drv->governor);
+		if (gov) {
+			cpuidle_prev_governor = cpuidle_curr_governor;
+			if (cpuidle_switch_governor(gov) < 0)
+				cpuidle_prev_governor = NULL;
+		}
+		mutex_unlock(&cpuidle_lock);
+	}
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(cpuidle_register_driver);
@@ -274,9 +287,21 @@ EXPORT_SYMBOL_GPL(cpuidle_register_driver);
  */
 void cpuidle_unregister_driver(struct cpuidle_driver *drv)
 {
+	bool enabled = (cpuidle_get_driver() == drv);
+
 	spin_lock(&cpuidle_driver_lock);
 	__cpuidle_unregister_driver(drv);
 	spin_unlock(&cpuidle_driver_lock);
+
+	if (!enabled)
+		return;
+
+	mutex_lock(&cpuidle_lock);
+	if (cpuidle_prev_governor) {
+		if (!cpuidle_switch_governor(cpuidle_prev_governor))
+			cpuidle_prev_governor = NULL;
+	}
+	mutex_unlock(&cpuidle_lock);
 }
 EXPORT_SYMBOL_GPL(cpuidle_unregister_driver);
 

diff --git a/drivers/cpuidle/governor.c b/drivers/cpuidle/governor.c
index 2e3e141..e9801f2 100644
--- a/drivers/cpuidle/governor.c
+++ b/drivers/cpuidle/governor.c

@@ -20,14 +20,15 @@ char param_governor[CPUIDLE_NAME_LEN];
 
 LIST_HEAD(cpuidle_governors);
 struct cpuidle_governor *cpuidle_curr_governor;
+struct cpuidle_governor *cpuidle_prev_governor;
 
 /**
- * __cpuidle_find_governor - finds a governor of the specified name
+ * cpuidle_find_governor - finds a governor of the specified name
  * @str: the name
  *
  * Must be called with cpuidle_lock acquired.
  */
-static struct cpuidle_governor * __cpuidle_find_governor(const char *str)
+struct cpuidle_governor *cpuidle_find_governor(const char *str)
 {
 	struct cpuidle_governor *gov;
 
@@ -87,7 +88,7 @@ int cpuidle_register_governor(struct cpuidle_governor *gov)
 		return -ENODEV;
 
 	mutex_lock(&cpuidle_lock);
-	if (__cpuidle_find_governor(gov->name) == NULL) {
+	if (cpuidle_find_governor(gov->name) == NULL) {
 		ret = 0;
 		list_add_tail(&gov->governor_list, &cpuidle_governors);
 		if (!cpuidle_curr_governor ||

diff --git a/drivers/cpuidle/governors/Makefile b/drivers/cpuidle/governors/Makefile
index 42f44cc..63abb53 100644
--- a/drivers/cpuidle/governors/Makefile
+++ b/drivers/cpuidle/governors/Makefile

@@ -6,3 +6,4 @@
 obj-$(CONFIG_CPU_IDLE_GOV_LADDER) += ladder.o
 obj-$(CONFIG_CPU_IDLE_GOV_MENU) += menu.o
 obj-$(CONFIG_CPU_IDLE_GOV_TEO) += teo.o
+obj-$(CONFIG_CPU_IDLE_GOV_HALTPOLL) += haltpoll.o

diff --git a/drivers/cpuidle/governors/haltpoll.c b/drivers/cpuidle/governors/haltpoll.c
new file mode 100644
index 0000000..7a703d2
--- /dev/null
+++ b/drivers/cpuidle/governors/haltpoll.c

@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * haltpoll.c - haltpoll idle governor
+ *
+ * Copyright 2019 Red Hat, Inc. and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ * Authors: Marcelo Tosatti <mtosatti@redhat.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/cpuidle.h>
+#include <linux/time.h>
+#include <linux/ktime.h>
+#include <linux/hrtimer.h>
+#include <linux/tick.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/kvm_para.h>
+
+static unsigned int guest_halt_poll_ns __read_mostly = 200000;
+module_param(guest_halt_poll_ns, uint, 0644);
+
+/* division factor to shrink halt_poll_ns */
+static unsigned int guest_halt_poll_shrink __read_mostly = 2;
+module_param(guest_halt_poll_shrink, uint, 0644);
+
+/* multiplication factor to grow per-cpu poll_limit_ns */
+static unsigned int guest_halt_poll_grow __read_mostly = 2;
+module_param(guest_halt_poll_grow, uint, 0644);
+
+/* value in us to start growing per-cpu halt_poll_ns */
+static unsigned int guest_halt_poll_grow_start __read_mostly = 50000;
+module_param(guest_halt_poll_grow_start, uint, 0644);
+
+/* allow shrinking guest halt poll */
+static bool guest_halt_poll_allow_shrink __read_mostly = true;
+module_param(guest_halt_poll_allow_shrink, bool, 0644);
+
+/**
+ * haltpoll_select - selects the next idle state to enter
+ * @drv: cpuidle driver containing state data
+ * @dev: the CPU
+ * @stop_tick: indication on whether or not to stop the tick
+ */
+static int haltpoll_select(struct cpuidle_driver *drv,
+			   struct cpuidle_device *dev,
+			   bool *stop_tick)
+{
+	int latency_req = cpuidle_governor_latency_req(dev->cpu);
+
+	if (!drv->state_count || latency_req == 0) {
+		*stop_tick = false;
+		return 0;
+	}
+
+	if (dev->poll_limit_ns == 0)
+		return 1;
+
+	/* Last state was poll? */
+	if (dev->last_state_idx == 0) {
+		/* Halt if no event occurred on poll window */
+		if (dev->poll_time_limit == true)
+			return 1;
+
+		*stop_tick = false;
+		/* Otherwise, poll again */
+		return 0;
+	}
+
+	*stop_tick = false;
+	/* Last state was halt: poll */
+	return 0;
+}
+
+static void adjust_poll_limit(struct cpuidle_device *dev, unsigned int block_us)
+{
+	unsigned int val;
+	u64 block_ns = block_us*NSEC_PER_USEC;
+
+	/* Grow cpu_halt_poll_us if
+	 * cpu_halt_poll_us < block_ns < guest_halt_poll_us
+	 */
+	if (block_ns > dev->poll_limit_ns && block_ns <= guest_halt_poll_ns) {
+		val = dev->poll_limit_ns * guest_halt_poll_grow;
+
+		if (val < guest_halt_poll_grow_start)
+			val = guest_halt_poll_grow_start;
+		if (val > guest_halt_poll_ns)
+			val = guest_halt_poll_ns;
+
+		dev->poll_limit_ns = val;
+	} else if (block_ns > guest_halt_poll_ns &&
+		   guest_halt_poll_allow_shrink) {
+		unsigned int shrink = guest_halt_poll_shrink;
+
+		val = dev->poll_limit_ns;
+		if (shrink == 0)
+			val = 0;
+		else
+			val /= shrink;
+		dev->poll_limit_ns = val;
+	}
+}
+
+/**
+ * haltpoll_reflect - update variables and update poll time
+ * @dev: the CPU
+ * @index: the index of actual entered state
+ */
+static void haltpoll_reflect(struct cpuidle_device *dev, int index)
+{
+	dev->last_state_idx = index;
+
+	if (index != 0)
+		adjust_poll_limit(dev, dev->last_residency);
+}
+
+/**
+ * haltpoll_enable_device - scans a CPU's states and does setup
+ * @drv: cpuidle driver
+ * @dev: the CPU
+ */
+static int haltpoll_enable_device(struct cpuidle_driver *drv,
+				  struct cpuidle_device *dev)
+{
+	dev->poll_limit_ns = 0;
+
+	return 0;
+}
+
+static struct cpuidle_governor haltpoll_governor = {
+	.name =			"haltpoll",
+	.rating =		9,
+	.enable =		haltpoll_enable_device,
+	.select =		haltpoll_select,
+	.reflect =		haltpoll_reflect,
+};
+
+static int __init init_haltpoll(void)
+{
+	if (kvm_para_available())
+		return cpuidle_register_governor(&haltpoll_governor);
+
+	return 0;
+}
+
+postcore_initcall(init_haltpoll);

diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c
index f0dddc6..428eeb8 100644
--- a/drivers/cpuidle/governors/ladder.c
+++ b/drivers/cpuidle/governors/ladder.c

@@ -38,7 +38,6 @@ struct ladder_device_state {
 
 struct ladder_device {
 	struct ladder_device_state states[CPUIDLE_STATE_MAX];
-	int last_state_idx;
 };
 
 static DEFINE_PER_CPU(struct ladder_device, ladder_devices);
@@ -49,12 +48,13 @@ static DEFINE_PER_CPU(struct ladder_device, ladder_devices);
  * @old_idx: the current state index
  * @new_idx: the new target state index
  */
-static inline void ladder_do_selection(struct ladder_device *ldev,
+static inline void ladder_do_selection(struct cpuidle_device *dev,
+				       struct ladder_device *ldev,
 				       int old_idx, int new_idx)
 {
 	ldev->states[old_idx].stats.promotion_count = 0;
 	ldev->states[old_idx].stats.demotion_count = 0;
-	ldev->last_state_idx = new_idx;
+	dev->last_state_idx = new_idx;
 }
 
 /**
@@ -68,13 +68,13 @@ static int ladder_select_state(struct cpuidle_driver *drv,
 {
 	struct ladder_device *ldev = this_cpu_ptr(&ladder_devices);
 	struct ladder_device_state *last_state;
-	int last_residency, last_idx = ldev->last_state_idx;
+	int last_residency, last_idx = dev->last_state_idx;
 	int first_idx = drv->states[0].flags & CPUIDLE_FLAG_POLLING ? 1 : 0;
 	int latency_req = cpuidle_governor_latency_req(dev->cpu);
 
 	/* Special case when user has set very strict latency requirement */
 	if (unlikely(latency_req == 0)) {
-		ladder_do_selection(ldev, last_idx, 0);
+		ladder_do_selection(dev, ldev, last_idx, 0);
 		return 0;
 	}
 
@@ -91,7 +91,7 @@ static int ladder_select_state(struct cpuidle_driver *drv,
 		last_state->stats.promotion_count++;
 		last_state->stats.demotion_count = 0;
 		if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) {
-			ladder_do_selection(ldev, last_idx, last_idx + 1);
+			ladder_do_selection(dev, ldev, last_idx, last_idx + 1);
 			return last_idx + 1;
 		}
 	}
@@ -107,7 +107,7 @@ static int ladder_select_state(struct cpuidle_driver *drv,
 			if (drv->states[i].exit_latency <= latency_req)
 				break;
 		}
-		ladder_do_selection(ldev, last_idx, i);
+		ladder_do_selection(dev, ldev, last_idx, i);
 		return i;
 	}
 
@@ -116,7 +116,7 @@ static int ladder_select_state(struct cpuidle_driver *drv,
 		last_state->stats.demotion_count++;
 		last_state->stats.promotion_count = 0;
 		if (last_state->stats.demotion_count >= last_state->threshold.demotion_count) {
-			ladder_do_selection(ldev, last_idx, last_idx - 1);
+			ladder_do_selection(dev, ldev, last_idx, last_idx - 1);
 			return last_idx - 1;
 		}
 	}
@@ -139,7 +139,7 @@ static int ladder_enable_device(struct cpuidle_driver *drv,
 	struct ladder_device_state *lstate;
 	struct cpuidle_state *state;
 
-	ldev->last_state_idx = first_idx;
+	dev->last_state_idx = first_idx;
 
 	for (i = first_idx; i < drv->state_count; i++) {
 		state = &drv->states[i];
@@ -167,9 +167,8 @@ static int ladder_enable_device(struct cpuidle_driver *drv,
  */
 static void ladder_reflect(struct cpuidle_device *dev, int index)
 {
-	struct ladder_device *ldev = this_cpu_ptr(&ladder_devices);
 	if (index > 0)
-		ldev->last_state_idx = index;
+		dev->last_state_idx = index;
 }
 
 static struct cpuidle_governor ladder_governor = {

diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index e9a28c7..e5a5d0c 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c

@@ -117,7 +117,6 @@
  */
 
 struct menu_device {
-	int		last_state_idx;
 	int             needs_update;
 	int             tick_wakeup;
 
@@ -302,9 +301,10 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 	     !drv->states[0].disabled && !dev->states_usage[0].disable)) {
 		/*
 		 * In this case state[0] will be used no matter what, so return
-		 * it right away and keep the tick running.
+		 * it right away and keep the tick running if state[0] is a
+		 * polling one.
 		 */
-		*stop_tick = false;
+		*stop_tick = !(drv->states[0].flags & CPUIDLE_FLAG_POLLING);
 		return 0;
 	}
 
@@ -395,16 +395,9 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 
 			return idx;
 		}
-		if (s->exit_latency > latency_req) {
-			/*
-			 * If we break out of the loop for latency reasons, use
-			 * the target residency of the selected state as the
-			 * expected idle duration so that the tick is retained
-			 * as long as that target residency is low enough.
-			 */
-			predicted_us = drv->states[idx].target_residency;
+		if (s->exit_latency > latency_req)
 			break;
-		}
+
 		idx = i;
 	}
 
@@ -455,7 +448,7 @@ static void menu_reflect(struct cpuidle_device *dev, int index)
 {
 	struct menu_device *data = this_cpu_ptr(&menu_devices);
 
-	data->last_state_idx = index;
+	dev->last_state_idx = index;
 	data->needs_update = 1;
 	data->tick_wakeup = tick_nohz_idle_got_tick();
 }
@@ -468,7 +461,7 @@ static void menu_reflect(struct cpuidle_device *dev, int index)
 static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev)
 {
 	struct menu_device *data = this_cpu_ptr(&menu_devices);
-	int last_idx = data->last_state_idx;
+	int last_idx = dev->last_state_idx;
 	struct cpuidle_state *target = &drv->states[last_idx];
 	unsigned int measured_us;
 	unsigned int new_factor;

diff --git a/drivers/cpuidle/governors/teo.c b/drivers/cpuidle/governors/teo.c
index 7d05efd..b5a0e49 100644
--- a/drivers/cpuidle/governors/teo.c
+++ b/drivers/cpuidle/governors/teo.c

@@ -96,7 +96,6 @@ struct teo_idle_state {
  * @time_span_ns: Time between idle state selection and post-wakeup update.
  * @sleep_length_ns: Time till the closest timer event (at the selection time).
  * @states: Idle states data corresponding to this CPU.
- * @last_state: Idle state entered by the CPU last time.
  * @interval_idx: Index of the most recent saved idle interval.
  * @intervals: Saved idle duration values.
  */
@@ -104,7 +103,6 @@ struct teo_cpu {
 	u64 time_span_ns;
 	u64 sleep_length_ns;
 	struct teo_idle_state states[CPUIDLE_STATE_MAX];
-	int last_state;
 	int interval_idx;
 	unsigned int intervals[INTERVALS];
 };
@@ -125,12 +123,15 @@ static void teo_update(struct cpuidle_driver *drv, struct cpuidle_device *dev)
 
 	if (cpu_data->time_span_ns >= cpu_data->sleep_length_ns) {
 		/*
-		 * One of the safety nets has triggered or this was a timer
-		 * wakeup (or equivalent).
+		 * One of the safety nets has triggered or the wakeup was close
+		 * enough to the closest timer event expected at the idle state
+		 * selection time to be discarded.
 		 */
-		measured_us = sleep_length_us;
+		measured_us = UINT_MAX;
 	} else {
-		unsigned int lat = drv->states[cpu_data->last_state].exit_latency;
+		unsigned int lat;
+
+		lat = drv->states[dev->last_state_idx].exit_latency;
 
 		measured_us = ktime_to_us(cpu_data->time_span_ns);
 		/*
@@ -189,15 +190,6 @@ static void teo_update(struct cpuidle_driver *drv, struct cpuidle_device *dev)
 	}
 
 	/*
-	 * If the total time span between idle state selection and the "reflect"
-	 * callback is greater than or equal to the sleep length determined at
-	 * the idle state selection time, the wakeup is likely to be due to a
-	 * timer event.
-	 */
-	if (cpu_data->time_span_ns >= cpu_data->sleep_length_ns)
-		measured_us = UINT_MAX;
-
-	/*
 	 * Save idle duration values corresponding to non-timer wakeups for
 	 * pattern detection.
 	 */
@@ -242,12 +234,12 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 	struct teo_cpu *cpu_data = per_cpu_ptr(&teo_cpus, dev->cpu);
 	int latency_req = cpuidle_governor_latency_req(dev->cpu);
 	unsigned int duration_us, count;
-	int max_early_idx, idx, i;
+	int max_early_idx, constraint_idx, idx, i;
 	ktime_t delta_tick;
 
-	if (cpu_data->last_state >= 0) {
+	if (dev->last_state_idx >= 0) {
 		teo_update(drv, dev);
-		cpu_data->last_state = -1;
+		dev->last_state_idx = -1;
 	}
 
 	cpu_data->time_span_ns = local_clock();
@@ -257,6 +249,7 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 
 	count = 0;
 	max_early_idx = -1;
+	constraint_idx = drv->state_count;
 	idx = -1;
 
 	for (i = 0; i < drv->state_count; i++) {
@@ -286,16 +279,8 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 		if (s->target_residency > duration_us)
 			break;
 
-		if (s->exit_latency > latency_req) {
-			/*
-			 * If we break out of the loop for latency reasons, use
-			 * the target residency of the selected state as the
-			 * expected idle duration to avoid stopping the tick
-			 * as long as that target residency is low enough.
-			 */
-			duration_us = drv->states[idx].target_residency;
-			goto refine;
-		}
+		if (s->exit_latency > latency_req && constraint_idx > i)
+			constraint_idx = i;
 
 		idx = i;
 
@@ -321,7 +306,13 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 		duration_us = drv->states[idx].target_residency;
 	}
 
-refine:
+	/*
+	 * If there is a latency constraint, it may be necessary to use a
+	 * shallower idle state than the one selected so far.
+	 */
+	if (constraint_idx < idx)
+		idx = constraint_idx;
+
 	if (idx < 0) {
 		idx = 0; /* No states enabled. Must use 0. */
 	} else if (idx > 0) {
@@ -331,13 +322,12 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 
 		/*
 		 * Count and sum the most recent idle duration values less than
-		 * the target residency of the state selected so far, find the
-		 * max.
+		 * the current expected idle duration value.
 		 */
 		for (i = 0; i < INTERVALS; i++) {
 			unsigned int val = cpu_data->intervals[i];
 
-			if (val >= drv->states[idx].target_residency)
+			if (val >= duration_us)
 				continue;
 
 			count++;
@@ -356,8 +346,10 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 			 * would be too shallow.
 			 */
 			if (!(tick_nohz_tick_stopped() && avg_us < TICK_USEC)) {
-				idx = teo_find_shallower_state(drv, dev, idx, avg_us);
 				duration_us = avg_us;
+				if (drv->states[idx].target_residency > avg_us)
+					idx = teo_find_shallower_state(drv, dev,
+								       idx, avg_us);
 			}
 		}
 	}
@@ -394,7 +386,7 @@ static void teo_reflect(struct cpuidle_device *dev, int state)
 {
 	struct teo_cpu *cpu_data = per_cpu_ptr(&teo_cpus, dev->cpu);
 
-	cpu_data->last_state = state;
+	dev->last_state_idx = state;
 	/*
 	 * If the wakeup was not "natural", but triggered by one of the safety
 	 * nets, assume that the CPU might have been idle for the entire sleep

diff --git a/drivers/cpuidle/poll_state.c b/drivers/cpuidle/poll_state.c
index 02b9315..c8fa5f4 100644
--- a/drivers/cpuidle/poll_state.c
+++ b/drivers/cpuidle/poll_state.c

@@ -20,16 +20,9 @@ static int __cpuidle poll_idle(struct cpuidle_device *dev,
 	local_irq_enable();
 	if (!current_set_polling_and_test()) {
 		unsigned int loop_count = 0;
-		u64 limit = TICK_NSEC;
-		int i;
+		u64 limit;
 
-		for (i = 1; i < drv->state_count; i++) {
-			if (drv->states[i].disabled || dev->states_usage[i].disable)
-				continue;
-
-			limit = (u64)drv->states[i].target_residency * NSEC_PER_USEC;
-			break;
-		}
+		limit = cpuidle_poll_time(drv, dev);
 
 		while (!need_resched()) {
 			cpu_relax();

diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index eb20adb..2bb2683 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c

@@ -334,6 +334,7 @@ struct cpuidle_state_kobj {
 	struct cpuidle_state_usage *state_usage;
 	struct completion kobj_unregister;
 	struct kobject kobj;
+	struct cpuidle_device *device;
 };
 
 #ifdef CONFIG_SUSPEND
@@ -391,6 +392,7 @@ static inline void cpuidle_remove_s2idle_attr_group(struct cpuidle_state_kobj *k
 #define kobj_to_state_obj(k) container_of(k, struct cpuidle_state_kobj, kobj)
 #define kobj_to_state(k) (kobj_to_state_obj(k)->state)
 #define kobj_to_state_usage(k) (kobj_to_state_obj(k)->state_usage)
+#define kobj_to_device(k) (kobj_to_state_obj(k)->device)
 #define attr_to_stateattr(a) container_of(a, struct cpuidle_state_attr, attr)
 
 static ssize_t cpuidle_state_show(struct kobject *kobj, struct attribute *attr,
@@ -414,10 +416,14 @@ static ssize_t cpuidle_state_store(struct kobject *kobj, struct attribute *attr,
 	struct cpuidle_state *state = kobj_to_state(kobj);
 	struct cpuidle_state_usage *state_usage = kobj_to_state_usage(kobj);
 	struct cpuidle_state_attr *cattr = attr_to_stateattr(attr);
+	struct cpuidle_device *dev = kobj_to_device(kobj);
 
 	if (cattr->store)
 		ret = cattr->store(state, state_usage, buf, size);
 
+	/* reset poll time cache */
+	dev->poll_limit_ns = 0;
+
 	return ret;
 }
 
@@ -468,6 +474,7 @@ static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
 		}
 		kobj->state = &drv->states[i];
 		kobj->state_usage = &device->states_usage[i];
+		kobj->device = device;
 		init_completion(&kobj->kobj_unregister);
 
 		ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle,

diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index ba98a4e..defe1d4 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig

@@ -93,15 +93,28 @@
 	  This does not yet operate with optimal voltages.
 
 config ARM_TEGRA_DEVFREQ
-	tristate "Tegra DEVFREQ Driver"
-	depends on ARCH_TEGRA_124_SOC
-	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	tristate "NVIDIA Tegra30/114/124/210 DEVFREQ Driver"
+	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_114_SOC || \
+		ARCH_TEGRA_132_SOC || ARCH_TEGRA_124_SOC || \
+		ARCH_TEGRA_210_SOC || \
+		COMPILE_TEST
 	select PM_OPP
 	help
 	  This adds the DEVFREQ driver for the Tegra family of SoCs.
 	  It reads ACTMON counters of memory controllers and adjusts the
 	  operating frequencies and voltages with OPP support.
 
+config ARM_TEGRA20_DEVFREQ
+	tristate "NVIDIA Tegra20 DEVFREQ Driver"
+	depends on (TEGRA_MC && TEGRA20_EMC) || COMPILE_TEST
+	depends on COMMON_CLK
+	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	select PM_OPP
+	help
+	  This adds the DEVFREQ driver for the Tegra20 family of SoCs.
+	  It reads Memory Controller counters and adjusts the operating
+	  frequencies and voltages with OPP support.
+
 config ARM_RK3399_DMC_DEVFREQ
 	tristate "ARM RK3399 DMC DEVFREQ Driver"
 	depends on ARCH_ROCKCHIP

diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index 32b8d4d..338ae84 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile

@@ -10,7 +10,8 @@
 # DEVFREQ Drivers
 obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
 obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
-obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra-devfreq.o
+obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
+obj-$(CONFIG_ARM_TEGRA20_DEVFREQ)	+= tegra20-devfreq.o
 
 # DEVFREQ Event Drivers
 obj-$(CONFIG_PM_DEVFREQ_EVENT)		+= event/

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index ab22bf8..446490c9 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c

@@ -254,7 +254,7 @@ static struct devfreq_governor *try_then_request_governor(const char *name)
 		/* Restore previous state before return */
 		mutex_lock(&devfreq_list_lock);
 		if (err)
-			return ERR_PTR(err);
+			return (err < 0) ? ERR_PTR(err) : ERR_PTR(-EINVAL);
 
 		governor = find_devfreq_governor(name);
 	}
@@ -402,7 +402,7 @@ static void devfreq_monitor(struct work_struct *work)
  * devfreq_monitor_start() - Start load monitoring of devfreq instance
  * @devfreq:	the devfreq instance.
  *
- * Helper function for starting devfreq device load monitoing. By
+ * Helper function for starting devfreq device load monitoring. By
  * default delayed work based monitoring is supported. Function
  * to be called from governor in response to DEVFREQ_GOV_START
  * event when device is added to devfreq framework.
@@ -420,7 +420,7 @@ EXPORT_SYMBOL(devfreq_monitor_start);
  * devfreq_monitor_stop() - Stop load monitoring of a devfreq instance
  * @devfreq:	the devfreq instance.
  *
- * Helper function to stop devfreq device load monitoing. Function
+ * Helper function to stop devfreq device load monitoring. Function
  * to be called from governor in response to DEVFREQ_GOV_STOP
  * event when device is removed from devfreq framework.
  */
@@ -434,7 +434,7 @@ EXPORT_SYMBOL(devfreq_monitor_stop);
  * devfreq_monitor_suspend() - Suspend load monitoring of a devfreq instance
  * @devfreq:	the devfreq instance.
  *
- * Helper function to suspend devfreq device load monitoing. Function
+ * Helper function to suspend devfreq device load monitoring. Function
  * to be called from governor in response to DEVFREQ_GOV_SUSPEND
  * event or when polling interval is set to zero.
  *
@@ -461,7 +461,7 @@ EXPORT_SYMBOL(devfreq_monitor_suspend);
  * devfreq_monitor_resume() - Resume load monitoring of a devfreq instance
  * @devfreq:    the devfreq instance.
  *
- * Helper function to resume devfreq device load monitoing. Function
+ * Helper function to resume devfreq device load monitoring. Function
  * to be called from governor in response to DEVFREQ_GOV_RESUME
  * event or when polling interval is set to non-zero.
  */
@@ -867,7 +867,7 @@ EXPORT_SYMBOL_GPL(devfreq_get_devfreq_by_phandle);
 
 /**
  * devm_devfreq_remove_device() - Resource-managed devfreq_remove_device()
- * @dev:	the device to add devfreq feature.
+ * @dev:	the device from which to remove devfreq feature.
  * @devfreq:	the devfreq instance to be removed
  */
 void devm_devfreq_remove_device(struct device *dev, struct devfreq *devfreq)

diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c
index 3ee3dd5..87b4205 100644
--- a/drivers/devfreq/event/exynos-ppmu.c
+++ b/drivers/devfreq/event/exynos-ppmu.c

@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/suspend.h>
@@ -20,6 +21,11 @@
 
 #include "exynos-ppmu.h"
 
+enum exynos_ppmu_type {
+	EXYNOS_TYPE_PPMU,
+	EXYNOS_TYPE_PPMU_V2,
+};
+
 struct exynos_ppmu_data {
 	struct clk *clk;
 };
@@ -33,6 +39,7 @@ struct exynos_ppmu {
 	struct regmap *regmap;
 
 	struct exynos_ppmu_data ppmu;
+	enum exynos_ppmu_type ppmu_type;
 };
 
 #define PPMU_EVENT(name)			\
@@ -86,6 +93,12 @@ static struct __exynos_ppmu_events {
 	PPMU_EVENT(d1-cpu),
 	PPMU_EVENT(d1-general),
 	PPMU_EVENT(d1-rt),
+
+	/* For Exynos5422 SoC */
+	PPMU_EVENT(dmc0_0),
+	PPMU_EVENT(dmc0_1),
+	PPMU_EVENT(dmc1_0),
+	PPMU_EVENT(dmc1_1),
 };
 
 static int exynos_ppmu_find_ppmu_id(struct devfreq_event_dev *edev)
@@ -151,9 +164,9 @@ static int exynos_ppmu_set_event(struct devfreq_event_dev *edev)
 	if (ret < 0)
 		return ret;
 
-	/* Set the event of Read/Write data count  */
+	/* Set the event of proper data type monitoring */
 	ret = regmap_write(info->regmap, PPMU_BEVTxSEL(id),
-				PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT);
+			   edev->desc->event_type);
 	if (ret < 0)
 		return ret;
 
@@ -365,23 +378,11 @@ static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev)
 	if (ret < 0)
 		return ret;
 
-	/* Set the event of Read/Write data count  */
-	switch (id) {
-	case PPMU_PMNCNT0:
-	case PPMU_PMNCNT1:
-	case PPMU_PMNCNT2:
-		ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
-				PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT);
-		if (ret < 0)
-			return ret;
-		break;
-	case PPMU_PMNCNT3:
-		ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
-				PPMU_V2_EVT3_RW_DATA_CNT);
-		if (ret < 0)
-			return ret;
-		break;
-	}
+	/* Set the event of proper data type monitoring */
+	ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
+			   edev->desc->event_type);
+	if (ret < 0)
+		return ret;
 
 	/* Reset cycle counter/performance counter and enable PPMU */
 	ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc);
@@ -480,31 +481,24 @@ static const struct devfreq_event_ops exynos_ppmu_v2_ops = {
 static const struct of_device_id exynos_ppmu_id_match[] = {
 	{
 		.compatible = "samsung,exynos-ppmu",
-		.data = (void *)&exynos_ppmu_ops,
+		.data = (void *)EXYNOS_TYPE_PPMU,
 	}, {
 		.compatible = "samsung,exynos-ppmu-v2",
-		.data = (void *)&exynos_ppmu_v2_ops,
+		.data = (void *)EXYNOS_TYPE_PPMU_V2,
 	},
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, exynos_ppmu_id_match);
 
-static struct devfreq_event_ops *exynos_bus_get_ops(struct device_node *np)
-{
-	const struct of_device_id *match;
-
-	match = of_match_node(exynos_ppmu_id_match, np);
-	return (struct devfreq_event_ops *)match->data;
-}
-
 static int of_get_devfreq_events(struct device_node *np,
 				 struct exynos_ppmu *info)
 {
 	struct devfreq_event_desc *desc;
-	struct devfreq_event_ops *event_ops;
 	struct device *dev = info->dev;
 	struct device_node *events_np, *node;
 	int i, j, count;
+	const struct of_device_id *of_id;
+	int ret;
 
 	events_np = of_get_child_by_name(np, "events");
 	if (!events_np) {
@@ -512,7 +506,6 @@ static int of_get_devfreq_events(struct device_node *np,
 			"failed to get child node of devfreq-event devices\n");
 		return -EINVAL;
 	}
-	event_ops = exynos_bus_get_ops(np);
 
 	count = of_get_child_count(events_np);
 	desc = devm_kcalloc(dev, count, sizeof(*desc), GFP_KERNEL);
@@ -520,6 +513,12 @@ static int of_get_devfreq_events(struct device_node *np,
 		return -ENOMEM;
 	info->num_events = count;
 
+	of_id = of_match_device(exynos_ppmu_id_match, dev);
+	if (of_id)
+		info->ppmu_type = (enum exynos_ppmu_type)of_id->data;
+	else
+		return -EINVAL;
+
 	j = 0;
 	for_each_child_of_node(events_np, node) {
 		for (i = 0; i < ARRAY_SIZE(ppmu_events); i++) {
@@ -537,10 +536,51 @@ static int of_get_devfreq_events(struct device_node *np,
 			continue;
 		}
 
-		desc[j].ops = event_ops;
+		switch (info->ppmu_type) {
+		case EXYNOS_TYPE_PPMU:
+			desc[j].ops = &exynos_ppmu_ops;
+			break;
+		case EXYNOS_TYPE_PPMU_V2:
+			desc[j].ops = &exynos_ppmu_v2_ops;
+			break;
+		}
+
 		desc[j].driver_data = info;
 
 		of_property_read_string(node, "event-name", &desc[j].name);
+		ret = of_property_read_u32(node, "event-data-type",
+					   &desc[j].event_type);
+		if (ret) {
+			/* Set the event of proper data type counting.
+			 * Check if the data type has been defined in DT,
+			 * use default if not.
+			 */
+			if (info->ppmu_type == EXYNOS_TYPE_PPMU_V2) {
+				struct devfreq_event_dev edev;
+				int id;
+				/* Not all registers take the same value for
+				 * read+write data count.
+				 */
+				edev.desc = &desc[j];
+				id = exynos_ppmu_find_ppmu_id(&edev);
+
+				switch (id) {
+				case PPMU_PMNCNT0:
+				case PPMU_PMNCNT1:
+				case PPMU_PMNCNT2:
+					desc[j].event_type = PPMU_V2_RO_DATA_CNT
+						| PPMU_V2_WO_DATA_CNT;
+					break;
+				case PPMU_PMNCNT3:
+					desc[j].event_type =
+						PPMU_V2_EVT3_RW_DATA_CNT;
+					break;
+				}
+			} else {
+				desc[j].event_type = PPMU_RO_DATA_CNT |
+					PPMU_WO_DATA_CNT;
+			}
+		}
 
 		j++;
 	}

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index d9f3779..c832673 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c

@@ -22,7 +22,6 @@
 #include <linux/slab.h>
 
 #define DEFAULT_SATURATION_RATIO	40
-#define DEFAULT_VOLTAGE_TOLERANCE	2
 
 struct exynos_bus {
 	struct device *dev;
@@ -34,9 +33,8 @@ struct exynos_bus {
 
 	unsigned long curr_freq;
 
-	struct regulator *regulator;
+	struct opp_table *opp_table;
 	struct clk *clk;
-	unsigned int voltage_tolerance;
 	unsigned int ratio;
 };
 
@@ -90,62 +88,29 @@ static int exynos_bus_get_event(struct exynos_bus *bus,
 }
 
 /*
- * Must necessary function for devfreq simple-ondemand governor
+ * devfreq function for both simple-ondemand and passive governor
  */
 static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags)
 {
 	struct exynos_bus *bus = dev_get_drvdata(dev);
 	struct dev_pm_opp *new_opp;
-	unsigned long old_freq, new_freq, new_volt, tol;
 	int ret = 0;
 
-	/* Get new opp-bus instance according to new bus clock */
+	/* Get correct frequency for bus. */
 	new_opp = devfreq_recommended_opp(dev, freq, flags);
 	if (IS_ERR(new_opp)) {
 		dev_err(dev, "failed to get recommended opp instance\n");
 		return PTR_ERR(new_opp);
 	}
 
-	new_freq = dev_pm_opp_get_freq(new_opp);
-	new_volt = dev_pm_opp_get_voltage(new_opp);
 	dev_pm_opp_put(new_opp);
 
-	old_freq = bus->curr_freq;
-
-	if (old_freq == new_freq)
-		return 0;
-	tol = new_volt * bus->voltage_tolerance / 100;
-
 	/* Change voltage and frequency according to new OPP level */
 	mutex_lock(&bus->lock);
+	ret = dev_pm_opp_set_rate(dev, *freq);
+	if (!ret)
+		bus->curr_freq = *freq;
 
-	if (old_freq < new_freq) {
-		ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
-		if (ret < 0) {
-			dev_err(bus->dev, "failed to set voltage\n");
-			goto out;
-		}
-	}
-
-	ret = clk_set_rate(bus->clk, new_freq);
-	if (ret < 0) {
-		dev_err(dev, "failed to change clock of bus\n");
-		clk_set_rate(bus->clk, old_freq);
-		goto out;
-	}
-
-	if (old_freq > new_freq) {
-		ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
-		if (ret < 0) {
-			dev_err(bus->dev, "failed to set voltage\n");
-			goto out;
-		}
-	}
-	bus->curr_freq = new_freq;
-
-	dev_dbg(dev, "Set the frequency of bus (%luHz -> %luHz, %luHz)\n",
-			old_freq, new_freq, clk_get_rate(bus->clk));
-out:
 	mutex_unlock(&bus->lock);
 
 	return ret;
@@ -191,57 +156,12 @@ static void exynos_bus_exit(struct device *dev)
 	if (ret < 0)
 		dev_warn(dev, "failed to disable the devfreq-event devices\n");
 
-	if (bus->regulator)
-		regulator_disable(bus->regulator);
-
 	dev_pm_opp_of_remove_table(dev);
 	clk_disable_unprepare(bus->clk);
-}
-
-/*
- * Must necessary function for devfreq passive governor
- */
-static int exynos_bus_passive_target(struct device *dev, unsigned long *freq,
-					u32 flags)
-{
-	struct exynos_bus *bus = dev_get_drvdata(dev);
-	struct dev_pm_opp *new_opp;
-	unsigned long old_freq, new_freq;
-	int ret = 0;
-
-	/* Get new opp-bus instance according to new bus clock */
-	new_opp = devfreq_recommended_opp(dev, freq, flags);
-	if (IS_ERR(new_opp)) {
-		dev_err(dev, "failed to get recommended opp instance\n");
-		return PTR_ERR(new_opp);
+	if (bus->opp_table) {
+		dev_pm_opp_put_regulators(bus->opp_table);
+		bus->opp_table = NULL;
 	}
-
-	new_freq = dev_pm_opp_get_freq(new_opp);
-	dev_pm_opp_put(new_opp);
-
-	old_freq = bus->curr_freq;
-
-	if (old_freq == new_freq)
-		return 0;
-
-	/* Change the frequency according to new OPP level */
-	mutex_lock(&bus->lock);
-
-	ret = clk_set_rate(bus->clk, new_freq);
-	if (ret < 0) {
-		dev_err(dev, "failed to set the clock of bus\n");
-		goto out;
-	}
-
-	*freq = new_freq;
-	bus->curr_freq = new_freq;
-
-	dev_dbg(dev, "Set the frequency of bus (%luHz -> %luHz, %luHz)\n",
-			old_freq, new_freq, clk_get_rate(bus->clk));
-out:
-	mutex_unlock(&bus->lock);
-
-	return ret;
 }
 
 static void exynos_bus_passive_exit(struct device *dev)
@@ -256,21 +176,19 @@ static int exynos_bus_parent_parse_of(struct device_node *np,
 					struct exynos_bus *bus)
 {
 	struct device *dev = bus->dev;
+	struct opp_table *opp_table;
+	const char *vdd = "vdd";
 	int i, ret, count, size;
 
-	/* Get the regulator to provide each bus with the power */
-	bus->regulator = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(bus->regulator)) {
-		dev_err(dev, "failed to get VDD regulator\n");
-		return PTR_ERR(bus->regulator);
-	}
-
-	ret = regulator_enable(bus->regulator);
-	if (ret < 0) {
-		dev_err(dev, "failed to enable VDD regulator\n");
+	opp_table = dev_pm_opp_set_regulators(dev, &vdd, 1);
+	if (IS_ERR(opp_table)) {
+		ret = PTR_ERR(opp_table);
+		dev_err(dev, "failed to set regulators %d\n", ret);
 		return ret;
 	}
 
+	bus->opp_table = opp_table;
+
 	/*
 	 * Get the devfreq-event devices to get the current utilization of
 	 * buses. This raw data will be used in devfreq ondemand governor.
@@ -311,14 +229,11 @@ static int exynos_bus_parent_parse_of(struct device_node *np,
 	if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio))
 		bus->ratio = DEFAULT_SATURATION_RATIO;
 
-	if (of_property_read_u32(np, "exynos,voltage-tolerance",
-					&bus->voltage_tolerance))
-		bus->voltage_tolerance = DEFAULT_VOLTAGE_TOLERANCE;
-
 	return 0;
 
 err_regulator:
-	regulator_disable(bus->regulator);
+	dev_pm_opp_put_regulators(bus->opp_table);
+	bus->opp_table = NULL;
 
 	return ret;
 }
@@ -383,6 +298,7 @@ static int exynos_bus_probe(struct platform_device *pdev)
 	struct exynos_bus *bus;
 	int ret, max_state;
 	unsigned long min_freq, max_freq;
+	bool passive = false;
 
 	if (!np) {
 		dev_err(dev, "failed to find devicetree node\n");
@@ -396,27 +312,27 @@ static int exynos_bus_probe(struct platform_device *pdev)
 	bus->dev = &pdev->dev;
 	platform_set_drvdata(pdev, bus);
 
-	/* Parse the device-tree to get the resource information */
-	ret = exynos_bus_parse_of(np, bus);
-	if (ret < 0)
-		return ret;
-
 	profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
-	if (!profile) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	if (!profile)
+		return -ENOMEM;
 
 	node = of_parse_phandle(dev->of_node, "devfreq", 0);
 	if (node) {
 		of_node_put(node);
-		goto passive;
+		passive = true;
 	} else {
 		ret = exynos_bus_parent_parse_of(np, bus);
+		if (ret < 0)
+			return ret;
 	}
 
+	/* Parse the device-tree to get the resource information */
+	ret = exynos_bus_parse_of(np, bus);
 	if (ret < 0)
-		goto err;
+		goto err_reg;
+
+	if (passive)
+		goto passive;
 
 	/* Initialize the struct profile and governor data for parent device */
 	profile->polling_ms = 50;
@@ -468,7 +384,7 @@ static int exynos_bus_probe(struct platform_device *pdev)
 	goto out;
 passive:
 	/* Initialize the struct profile and governor data for passive device */
-	profile->target = exynos_bus_passive_target;
+	profile->target = exynos_bus_target;
 	profile->exit = exynos_bus_passive_exit;
 
 	/* Get the instance of parent devfreq device */
@@ -507,6 +423,11 @@ static int exynos_bus_probe(struct platform_device *pdev)
 err:
 	dev_pm_opp_of_remove_table(dev);
 	clk_disable_unprepare(bus->clk);
+err_reg:
+	if (!passive) {
+		dev_pm_opp_put_regulators(bus->opp_table);
+		bus->opp_table = NULL;
+	}
 
 	return ret;
 }

diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
index 5830894..be6eeab 100644
--- a/drivers/devfreq/governor_passive.c
+++ b/drivers/devfreq/governor_passive.c

@@ -149,7 +149,6 @@ static int devfreq_passive_notifier_call(struct notifier_block *nb,
 static int devfreq_passive_event_handler(struct devfreq *devfreq,
 				unsigned int event, void *data)
 {
-	struct device *dev = devfreq->dev.parent;
 	struct devfreq_passive_data *p_data
 			= (struct devfreq_passive_data *)devfreq->data;
 	struct devfreq *parent = (struct devfreq *)p_data->parent;
@@ -165,12 +164,12 @@ static int devfreq_passive_event_handler(struct devfreq *devfreq,
 			p_data->this = devfreq;
 
 		nb->notifier_call = devfreq_passive_notifier_call;
-		ret = devm_devfreq_register_notifier(dev, parent, nb,
+		ret = devfreq_register_notifier(parent, nb,
 					DEVFREQ_TRANSITION_NOTIFIER);
 		break;
 	case DEVFREQ_GOV_STOP:
-		devm_devfreq_unregister_notifier(dev, parent, nb,
-					DEVFREQ_TRANSITION_NOTIFIER);
+		WARN_ON(devfreq_unregister_notifier(parent, nb,
+					DEVFREQ_TRANSITION_NOTIFIER));
 		break;
 	default:
 		break;

diff --git a/drivers/devfreq/rk3399_dmc.c b/drivers/devfreq/rk3399_dmc.c
index 682465f..2e65d72 100644
--- a/drivers/devfreq/rk3399_dmc.c
+++ b/drivers/devfreq/rk3399_dmc.c

@@ -351,7 +351,7 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
 
 	/*
 	 * Get dram timing and pass it to arm trust firmware,
-	 * the dram drvier in arm trust firmware will get these
+	 * the dram driver in arm trust firmware will get these
 	 * timing and to do dram initial.
 	 */
 	if (!of_get_ddr_timings(&data->timing, np)) {

diff --git a/drivers/devfreq/tegra20-devfreq.c b/drivers/devfreq/tegra20-devfreq.c
new file mode 100644
index 0000000..ff82bac
--- /dev/null
+++ b/drivers/devfreq/tegra20-devfreq.c

@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NVIDIA Tegra20 devfreq driver
+ *
+ * Copyright (C) 2019 GRATE-DRIVER project
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+
+#include <soc/tegra/mc.h>
+
+#include "governor.h"
+
+#define MC_STAT_CONTROL				0x90
+#define MC_STAT_EMC_CLOCK_LIMIT			0xa0
+#define MC_STAT_EMC_CLOCKS			0xa4
+#define MC_STAT_EMC_CONTROL			0xa8
+#define MC_STAT_EMC_COUNT			0xb8
+
+#define EMC_GATHER_CLEAR			(1 << 8)
+#define EMC_GATHER_ENABLE			(3 << 8)
+
+struct tegra_devfreq {
+	struct devfreq *devfreq;
+	struct clk *emc_clock;
+	void __iomem *regs;
+};
+
+static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
+				u32 flags)
+{
+	struct tegra_devfreq *tegra = dev_get_drvdata(dev);
+	struct devfreq *devfreq = tegra->devfreq;
+	struct dev_pm_opp *opp;
+	unsigned long rate;
+	int err;
+
+	opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(opp))
+		return PTR_ERR(opp);
+
+	rate = dev_pm_opp_get_freq(opp);
+	dev_pm_opp_put(opp);
+
+	err = clk_set_min_rate(tegra->emc_clock, rate);
+	if (err)
+		return err;
+
+	err = clk_set_rate(tegra->emc_clock, 0);
+	if (err)
+		goto restore_min_rate;
+
+	return 0;
+
+restore_min_rate:
+	clk_set_min_rate(tegra->emc_clock, devfreq->previous_freq);
+
+	return err;
+}
+
+static int tegra_devfreq_get_dev_status(struct device *dev,
+					struct devfreq_dev_status *stat)
+{
+	struct tegra_devfreq *tegra = dev_get_drvdata(dev);
+
+	/*
+	 * EMC_COUNT returns number of memory events, that number is lower
+	 * than the number of clocks. Conversion ratio of 1/8 results in a
+	 * bit higher bandwidth than actually needed, it is good enough for
+	 * the time being because drivers don't support requesting minimum
+	 * needed memory bandwidth yet.
+	 *
+	 * TODO: adjust the ratio value once relevant drivers will support
+	 * memory bandwidth management.
+	 */
+	stat->busy_time = readl_relaxed(tegra->regs + MC_STAT_EMC_COUNT);
+	stat->total_time = readl_relaxed(tegra->regs + MC_STAT_EMC_CLOCKS) / 8;
+	stat->current_frequency = clk_get_rate(tegra->emc_clock);
+
+	writel_relaxed(EMC_GATHER_CLEAR, tegra->regs + MC_STAT_CONTROL);
+	writel_relaxed(EMC_GATHER_ENABLE, tegra->regs + MC_STAT_CONTROL);
+
+	return 0;
+}
+
+static struct devfreq_dev_profile tegra_devfreq_profile = {
+	.polling_ms	= 500,
+	.target		= tegra_devfreq_target,
+	.get_dev_status	= tegra_devfreq_get_dev_status,
+};
+
+static struct tegra_mc *tegra_get_memory_controller(void)
+{
+	struct platform_device *pdev;
+	struct device_node *np;
+	struct tegra_mc *mc;
+
+	np = of_find_compatible_node(NULL, NULL, "nvidia,tegra20-mc-gart");
+	if (!np)
+		return ERR_PTR(-ENOENT);
+
+	pdev = of_find_device_by_node(np);
+	of_node_put(np);
+	if (!pdev)
+		return ERR_PTR(-ENODEV);
+
+	mc = platform_get_drvdata(pdev);
+	if (!mc)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return mc;
+}
+
+static int tegra_devfreq_probe(struct platform_device *pdev)
+{
+	struct tegra_devfreq *tegra;
+	struct tegra_mc *mc;
+	unsigned long max_rate;
+	unsigned long rate;
+	int err;
+
+	mc = tegra_get_memory_controller();
+	if (IS_ERR(mc)) {
+		err = PTR_ERR(mc);
+		dev_err(&pdev->dev, "failed to get memory controller: %d\n",
+			err);
+		return err;
+	}
+
+	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
+	if (!tegra)
+		return -ENOMEM;
+
+	/* EMC is a system-critical clock that is always enabled */
+	tegra->emc_clock = devm_clk_get(&pdev->dev, "emc");
+	if (IS_ERR(tegra->emc_clock)) {
+		err = PTR_ERR(tegra->emc_clock);
+		dev_err(&pdev->dev, "failed to get emc clock: %d\n", err);
+		return err;
+	}
+
+	tegra->regs = mc->regs;
+
+	max_rate = clk_round_rate(tegra->emc_clock, ULONG_MAX);
+
+	for (rate = 0; rate <= max_rate; rate++) {
+		rate = clk_round_rate(tegra->emc_clock, rate);
+
+		err = dev_pm_opp_add(&pdev->dev, rate, 0);
+		if (err) {
+			dev_err(&pdev->dev, "failed to add opp: %d\n", err);
+			goto remove_opps;
+		}
+	}
+
+	/*
+	 * Reset statistic gathers state, select global bandwidth for the
+	 * statistics collection mode and set clocks counter saturation
+	 * limit to maximum.
+	 */
+	writel_relaxed(0x00000000, tegra->regs + MC_STAT_CONTROL);
+	writel_relaxed(0x00000000, tegra->regs + MC_STAT_EMC_CONTROL);
+	writel_relaxed(0xffffffff, tegra->regs + MC_STAT_EMC_CLOCK_LIMIT);
+
+	platform_set_drvdata(pdev, tegra);
+
+	tegra->devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile,
+					    DEVFREQ_GOV_SIMPLE_ONDEMAND, NULL);
+	if (IS_ERR(tegra->devfreq)) {
+		err = PTR_ERR(tegra->devfreq);
+		goto remove_opps;
+	}
+
+	return 0;
+
+remove_opps:
+	dev_pm_opp_remove_all_dynamic(&pdev->dev);
+
+	return err;
+}
+
+static int tegra_devfreq_remove(struct platform_device *pdev)
+{
+	struct tegra_devfreq *tegra = platform_get_drvdata(pdev);
+
+	devfreq_remove_device(tegra->devfreq);
+	dev_pm_opp_remove_all_dynamic(&pdev->dev);
+
+	return 0;
+}
+
+static struct platform_driver tegra_devfreq_driver = {
+	.probe		= tegra_devfreq_probe,
+	.remove		= tegra_devfreq_remove,
+	.driver		= {
+		.name	= "tegra20-devfreq",
+	},
+};
+module_platform_driver(tegra_devfreq_driver);
+
+MODULE_ALIAS("platform:tegra20-devfreq");
+MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra20 devfreq driver");
+MODULE_LICENSE("GPL v2");

diff --git a/drivers/devfreq/tegra-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
similarity index 80%
rename from drivers/devfreq/tegra-devfreq.c
rename to drivers/devfreq/tegra30-devfreq.c
index 35c38aa..a6ba75f 100644
--- a/drivers/devfreq/tegra-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c

@@ -132,7 +132,6 @@ static struct tegra_devfreq_device_config actmon_device_configs[] = {
 struct tegra_devfreq_device {
 	const struct tegra_devfreq_device_config *config;
 	void __iomem *regs;
-	spinlock_t lock;
 
 	/* Average event count sampled in the last interrupt */
 	u32 avg_count;
@@ -160,6 +159,8 @@ struct tegra_devfreq {
 	struct notifier_block	rate_change_nb;
 
 	struct tegra_devfreq_device devices[ARRAY_SIZE(actmon_device_configs)];
+
+	int irq;
 };
 
 struct tegra_actmon_emc_ratio {
@@ -179,23 +180,23 @@ static struct tegra_actmon_emc_ratio actmon_emc_ratios[] = {
 
 static u32 actmon_readl(struct tegra_devfreq *tegra, u32 offset)
 {
-	return readl(tegra->regs + offset);
+	return readl_relaxed(tegra->regs + offset);
 }
 
 static void actmon_writel(struct tegra_devfreq *tegra, u32 val, u32 offset)
 {
-	writel(val, tegra->regs + offset);
+	writel_relaxed(val, tegra->regs + offset);
 }
 
 static u32 device_readl(struct tegra_devfreq_device *dev, u32 offset)
 {
-	return readl(dev->regs + offset);
+	return readl_relaxed(dev->regs + offset);
 }
 
 static void device_writel(struct tegra_devfreq_device *dev, u32 val,
 			  u32 offset)
 {
-	writel(val, dev->regs + offset);
+	writel_relaxed(val, dev->regs + offset);
 }
 
 static unsigned long do_percent(unsigned long val, unsigned int pct)
@@ -231,18 +232,14 @@ static void tegra_devfreq_update_wmark(struct tegra_devfreq *tegra,
 static void actmon_write_barrier(struct tegra_devfreq *tegra)
 {
 	/* ensure the update has reached the ACTMON */
-	wmb();
-	actmon_readl(tegra, ACTMON_GLB_STATUS);
+	readl(tegra->regs + ACTMON_GLB_STATUS);
 }
 
 static void actmon_isr_device(struct tegra_devfreq *tegra,
 			      struct tegra_devfreq_device *dev)
 {
-	unsigned long flags;
 	u32 intr_status, dev_ctrl;
 
-	spin_lock_irqsave(&dev->lock, flags);
-
 	dev->avg_count = device_readl(dev, ACTMON_DEV_AVG_COUNT);
 	tegra_devfreq_update_avg_wmark(tegra, dev);
 
@@ -291,26 +288,6 @@ static void actmon_isr_device(struct tegra_devfreq *tegra,
 	device_writel(dev, ACTMON_INTR_STATUS_CLEAR, ACTMON_DEV_INTR_STATUS);
 
 	actmon_write_barrier(tegra);
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-}
-
-static irqreturn_t actmon_isr(int irq, void *data)
-{
-	struct tegra_devfreq *tegra = data;
-	bool handled = false;
-	unsigned int i;
-	u32 val;
-
-	val = actmon_readl(tegra, ACTMON_GLB_STATUS);
-	for (i = 0; i < ARRAY_SIZE(tegra->devices); i++) {
-		if (val & tegra->devices[i].config->irq_mask) {
-			actmon_isr_device(tegra, tegra->devices + i);
-			handled = true;
-		}
-	}
-
-	return handled ? IRQ_WAKE_THREAD : IRQ_NONE;
 }
 
 static unsigned long actmon_cpu_to_emc_rate(struct tegra_devfreq *tegra,
@@ -337,15 +314,12 @@ static void actmon_update_target(struct tegra_devfreq *tegra,
 	unsigned long cpu_freq = 0;
 	unsigned long static_cpu_emc_freq = 0;
 	unsigned int avg_sustain_coef;
-	unsigned long flags;
 
 	if (dev->config->avg_dependency_threshold) {
 		cpu_freq = cpufreq_get(0);
 		static_cpu_emc_freq = actmon_cpu_to_emc_rate(tegra, cpu_freq);
 	}
 
-	spin_lock_irqsave(&dev->lock, flags);
-
 	dev->target_freq = dev->avg_count / ACTMON_SAMPLING_PERIOD;
 	avg_sustain_coef = 100 * 100 / dev->config->boost_up_threshold;
 	dev->target_freq = do_percent(dev->target_freq, avg_sustain_coef);
@@ -353,19 +327,31 @@ static void actmon_update_target(struct tegra_devfreq *tegra,
 
 	if (dev->avg_count >= dev->config->avg_dependency_threshold)
 		dev->target_freq = max(dev->target_freq, static_cpu_emc_freq);
-
-	spin_unlock_irqrestore(&dev->lock, flags);
 }
 
 static irqreturn_t actmon_thread_isr(int irq, void *data)
 {
 	struct tegra_devfreq *tegra = data;
+	bool handled = false;
+	unsigned int i;
+	u32 val;
 
 	mutex_lock(&tegra->devfreq->lock);
-	update_devfreq(tegra->devfreq);
+
+	val = actmon_readl(tegra, ACTMON_GLB_STATUS);
+	for (i = 0; i < ARRAY_SIZE(tegra->devices); i++) {
+		if (val & tegra->devices[i].config->irq_mask) {
+			actmon_isr_device(tegra, tegra->devices + i);
+			handled = true;
+		}
+	}
+
+	if (handled)
+		update_devfreq(tegra->devfreq);
+
 	mutex_unlock(&tegra->devfreq->lock);
 
-	return IRQ_HANDLED;
+	return handled ? IRQ_HANDLED : IRQ_NONE;
 }
 
 static int tegra_actmon_rate_notify_cb(struct notifier_block *nb,
@@ -375,7 +361,6 @@ static int tegra_actmon_rate_notify_cb(struct notifier_block *nb,
 	struct tegra_devfreq *tegra;
 	struct tegra_devfreq_device *dev;
 	unsigned int i;
-	unsigned long flags;
 
 	if (action != POST_RATE_CHANGE)
 		return NOTIFY_OK;
@@ -387,9 +372,7 @@ static int tegra_actmon_rate_notify_cb(struct notifier_block *nb,
 	for (i = 0; i < ARRAY_SIZE(tegra->devices); i++) {
 		dev = &tegra->devices[i];
 
-		spin_lock_irqsave(&dev->lock, flags);
 		tegra_devfreq_update_wmark(tegra, dev);
-		spin_unlock_irqrestore(&dev->lock, flags);
 	}
 
 	actmon_write_barrier(tegra);
@@ -397,48 +380,6 @@ static int tegra_actmon_rate_notify_cb(struct notifier_block *nb,
 	return NOTIFY_OK;
 }
 
-static void tegra_actmon_enable_interrupts(struct tegra_devfreq *tegra)
-{
-	struct tegra_devfreq_device *dev;
-	u32 val;
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(tegra->devices); i++) {
-		dev = &tegra->devices[i];
-
-		val = device_readl(dev, ACTMON_DEV_CTRL);
-		val |= ACTMON_DEV_CTRL_AVG_ABOVE_WMARK_EN;
-		val |= ACTMON_DEV_CTRL_AVG_BELOW_WMARK_EN;
-		val |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
-		val |= ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN;
-
-		device_writel(dev, val, ACTMON_DEV_CTRL);
-	}
-
-	actmon_write_barrier(tegra);
-}
-
-static void tegra_actmon_disable_interrupts(struct tegra_devfreq *tegra)
-{
-	struct tegra_devfreq_device *dev;
-	u32 val;
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(tegra->devices); i++) {
-		dev = &tegra->devices[i];
-
-		val = device_readl(dev, ACTMON_DEV_CTRL);
-		val &= ~ACTMON_DEV_CTRL_AVG_ABOVE_WMARK_EN;
-		val &= ~ACTMON_DEV_CTRL_AVG_BELOW_WMARK_EN;
-		val &= ~ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
-		val &= ~ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN;
-
-		device_writel(dev, val, ACTMON_DEV_CTRL);
-	}
-
-	actmon_write_barrier(tegra);
-}
-
 static void tegra_actmon_configure_device(struct tegra_devfreq *tegra,
 					  struct tegra_devfreq_device *dev)
 {
@@ -462,34 +403,80 @@ static void tegra_actmon_configure_device(struct tegra_devfreq *tegra,
 		<< ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_NUM_SHIFT;
 	val |= (ACTMON_ABOVE_WMARK_WINDOW - 1)
 		<< ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_NUM_SHIFT;
+	val |= ACTMON_DEV_CTRL_AVG_ABOVE_WMARK_EN;
+	val |= ACTMON_DEV_CTRL_AVG_BELOW_WMARK_EN;
+	val |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
+	val |= ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN;
 	val |= ACTMON_DEV_CTRL_ENB;
 
 	device_writel(dev, val, ACTMON_DEV_CTRL);
+}
+
+static void tegra_actmon_start(struct tegra_devfreq *tegra)
+{
+	unsigned int i;
+
+	disable_irq(tegra->irq);
+
+	actmon_writel(tegra, ACTMON_SAMPLING_PERIOD - 1,
+		      ACTMON_GLB_PERIOD_CTRL);
+
+	for (i = 0; i < ARRAY_SIZE(tegra->devices); i++)
+		tegra_actmon_configure_device(tegra, &tegra->devices[i]);
 
 	actmon_write_barrier(tegra);
+
+	enable_irq(tegra->irq);
+}
+
+static void tegra_actmon_stop(struct tegra_devfreq *tegra)
+{
+	unsigned int i;
+
+	disable_irq(tegra->irq);
+
+	for (i = 0; i < ARRAY_SIZE(tegra->devices); i++) {
+		device_writel(&tegra->devices[i], 0x00000000, ACTMON_DEV_CTRL);
+		device_writel(&tegra->devices[i], ACTMON_INTR_STATUS_CLEAR,
+			      ACTMON_DEV_INTR_STATUS);
+	}
+
+	actmon_write_barrier(tegra);
+
+	enable_irq(tegra->irq);
 }
 
 static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
 				u32 flags)
 {
 	struct tegra_devfreq *tegra = dev_get_drvdata(dev);
+	struct devfreq *devfreq = tegra->devfreq;
 	struct dev_pm_opp *opp;
-	unsigned long rate = *freq * KHZ;
+	unsigned long rate;
+	int err;
 
-	opp = devfreq_recommended_opp(dev, &rate, flags);
+	opp = devfreq_recommended_opp(dev, freq, flags);
 	if (IS_ERR(opp)) {
-		dev_err(dev, "Failed to find opp for %lu KHz\n", *freq);
+		dev_err(dev, "Failed to find opp for %lu Hz\n", *freq);
 		return PTR_ERR(opp);
 	}
 	rate = dev_pm_opp_get_freq(opp);
 	dev_pm_opp_put(opp);
 
-	clk_set_min_rate(tegra->emc_clock, rate);
-	clk_set_rate(tegra->emc_clock, 0);
+	err = clk_set_min_rate(tegra->emc_clock, rate);
+	if (err)
+		return err;
 
-	*freq = rate;
+	err = clk_set_rate(tegra->emc_clock, 0);
+	if (err)
+		goto restore_min_rate;
 
 	return 0;
+
+restore_min_rate:
+	clk_set_min_rate(tegra->emc_clock, devfreq->previous_freq);
+
+	return err;
 }
 
 static int tegra_devfreq_get_dev_status(struct device *dev,
@@ -497,13 +484,15 @@ static int tegra_devfreq_get_dev_status(struct device *dev,
 {
 	struct tegra_devfreq *tegra = dev_get_drvdata(dev);
 	struct tegra_devfreq_device *actmon_dev;
+	unsigned long cur_freq;
 
-	stat->current_frequency = tegra->cur_freq;
+	cur_freq = READ_ONCE(tegra->cur_freq);
 
 	/* To be used by the tegra governor */
 	stat->private_data = tegra;
 
 	/* The below are to be used by the other governors */
+	stat->current_frequency = cur_freq * KHZ;
 
 	actmon_dev = &tegra->devices[MCALL];
 
@@ -514,7 +503,7 @@ static int tegra_devfreq_get_dev_status(struct device *dev,
 	stat->busy_time *= 100 / BUS_SATURATION_RATIO;
 
 	/* Number of cycles in a sampling period */
-	stat->total_time = ACTMON_SAMPLING_PERIOD * tegra->cur_freq;
+	stat->total_time = ACTMON_SAMPLING_PERIOD * cur_freq;
 
 	stat->busy_time = min(stat->busy_time, stat->total_time);
 
@@ -553,7 +542,7 @@ static int tegra_governor_get_target(struct devfreq *devfreq,
 		target_freq = max(target_freq, dev->target_freq);
 	}
 
-	*freq = target_freq;
+	*freq = target_freq * KHZ;
 
 	return 0;
 }
@@ -566,22 +555,22 @@ static int tegra_governor_event_handler(struct devfreq *devfreq,
 	switch (event) {
 	case DEVFREQ_GOV_START:
 		devfreq_monitor_start(devfreq);
-		tegra_actmon_enable_interrupts(tegra);
+		tegra_actmon_start(tegra);
 		break;
 
 	case DEVFREQ_GOV_STOP:
-		tegra_actmon_disable_interrupts(tegra);
+		tegra_actmon_stop(tegra);
 		devfreq_monitor_stop(devfreq);
 		break;
 
 	case DEVFREQ_GOV_SUSPEND:
-		tegra_actmon_disable_interrupts(tegra);
+		tegra_actmon_stop(tegra);
 		devfreq_monitor_suspend(devfreq);
 		break;
 
 	case DEVFREQ_GOV_RESUME:
 		devfreq_monitor_resume(devfreq);
-		tegra_actmon_enable_interrupts(tegra);
+		tegra_actmon_start(tegra);
 		break;
 	}
 
@@ -592,25 +581,22 @@ static struct devfreq_governor tegra_devfreq_governor = {
 	.name = "tegra_actmon",
 	.get_target_freq = tegra_governor_get_target,
 	.event_handler = tegra_governor_event_handler,
+	.immutable = true,
 };
 
 static int tegra_devfreq_probe(struct platform_device *pdev)
 {
 	struct tegra_devfreq *tegra;
 	struct tegra_devfreq_device *dev;
-	struct resource *res;
 	unsigned int i;
 	unsigned long rate;
-	int irq;
 	int err;
 
 	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
 	if (!tegra)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	tegra->regs = devm_ioremap_resource(&pdev->dev, res);
+	tegra->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(tegra->regs))
 		return PTR_ERR(tegra->regs);
 
@@ -632,13 +618,10 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 		return PTR_ERR(tegra->emc_clock);
 	}
 
-	clk_set_rate(tegra->emc_clock, ULONG_MAX);
-
-	tegra->rate_change_nb.notifier_call = tegra_actmon_rate_notify_cb;
-	err = clk_notifier_register(tegra->emc_clock, &tegra->rate_change_nb);
-	if (err) {
-		dev_err(&pdev->dev,
-			"Failed to register rate change notifier\n");
+	tegra->irq = platform_get_irq(pdev, 0);
+	if (tegra->irq < 0) {
+		err = tegra->irq;
+		dev_err(&pdev->dev, "Failed to get IRQ: %d\n", err);
 		return err;
 	}
 
@@ -656,73 +639,94 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 	tegra->max_freq = clk_round_rate(tegra->emc_clock, ULONG_MAX) / KHZ;
 	tegra->cur_freq = clk_get_rate(tegra->emc_clock) / KHZ;
 
-	actmon_writel(tegra, ACTMON_SAMPLING_PERIOD - 1,
-		      ACTMON_GLB_PERIOD_CTRL);
-
 	for (i = 0; i < ARRAY_SIZE(actmon_device_configs); i++) {
 		dev = tegra->devices + i;
 		dev->config = actmon_device_configs + i;
 		dev->regs = tegra->regs + dev->config->offset;
-		spin_lock_init(&dev->lock);
-
-		tegra_actmon_configure_device(tegra, dev);
 	}
 
 	for (rate = 0; rate <= tegra->max_freq * KHZ; rate++) {
 		rate = clk_round_rate(tegra->emc_clock, rate);
-		dev_pm_opp_add(&pdev->dev, rate, 0);
-	}
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq);
-		return irq;
+		err = dev_pm_opp_add(&pdev->dev, rate, 0);
+		if (err) {
+			dev_err(&pdev->dev, "Failed to add OPP: %d\n", err);
+			goto remove_opps;
+		}
 	}
 
 	platform_set_drvdata(pdev, tegra);
 
-	err = devm_request_threaded_irq(&pdev->dev, irq, actmon_isr,
-					actmon_thread_isr, IRQF_SHARED,
-					"tegra-devfreq", tegra);
+	tegra->rate_change_nb.notifier_call = tegra_actmon_rate_notify_cb;
+	err = clk_notifier_register(tegra->emc_clock, &tegra->rate_change_nb);
 	if (err) {
-		dev_err(&pdev->dev, "Interrupt request failed\n");
-		return err;
+		dev_err(&pdev->dev,
+			"Failed to register rate change notifier\n");
+		goto remove_opps;
+	}
+
+	err = devfreq_add_governor(&tegra_devfreq_governor);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to add governor: %d\n", err);
+		goto unreg_notifier;
 	}
 
 	tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock);
-	tegra->devfreq = devm_devfreq_add_device(&pdev->dev,
-						 &tegra_devfreq_profile,
-						 "tegra_actmon",
-						 NULL);
+	tegra->devfreq = devfreq_add_device(&pdev->dev,
+					    &tegra_devfreq_profile,
+					    "tegra_actmon",
+					    NULL);
+	if (IS_ERR(tegra->devfreq)) {
+		err = PTR_ERR(tegra->devfreq);
+		goto remove_governor;
+	}
+
+	err = devm_request_threaded_irq(&pdev->dev, tegra->irq, NULL,
+					actmon_thread_isr, IRQF_ONESHOT,
+					"tegra-devfreq", tegra);
+	if (err) {
+		dev_err(&pdev->dev, "Interrupt request failed: %d\n", err);
+		goto remove_devfreq;
+	}
 
 	return 0;
+
+remove_devfreq:
+	devfreq_remove_device(tegra->devfreq);
+
+remove_governor:
+	devfreq_remove_governor(&tegra_devfreq_governor);
+
+unreg_notifier:
+	clk_notifier_unregister(tegra->emc_clock, &tegra->rate_change_nb);
+
+remove_opps:
+	dev_pm_opp_remove_all_dynamic(&pdev->dev);
+
+	reset_control_reset(tegra->reset);
+	clk_disable_unprepare(tegra->clock);
+
+	return err;
 }
 
 static int tegra_devfreq_remove(struct platform_device *pdev)
 {
 	struct tegra_devfreq *tegra = platform_get_drvdata(pdev);
-	int irq = platform_get_irq(pdev, 0);
-	u32 val;
-	unsigned int i;
 
-	for (i = 0; i < ARRAY_SIZE(actmon_device_configs); i++) {
-		val = device_readl(&tegra->devices[i], ACTMON_DEV_CTRL);
-		val &= ~ACTMON_DEV_CTRL_ENB;
-		device_writel(&tegra->devices[i], val, ACTMON_DEV_CTRL);
-	}
-
-	actmon_write_barrier(tegra);
-
-	devm_free_irq(&pdev->dev, irq, tegra);
+	devfreq_remove_device(tegra->devfreq);
+	devfreq_remove_governor(&tegra_devfreq_governor);
 
 	clk_notifier_unregister(tegra->emc_clock, &tegra->rate_change_nb);
+	dev_pm_opp_remove_all_dynamic(&pdev->dev);
 
+	reset_control_reset(tegra->reset);
 	clk_disable_unprepare(tegra->clock);
 
 	return 0;
 }
 
 static const struct of_device_id tegra_devfreq_of_match[] = {
+	{ .compatible = "nvidia,tegra30-actmon" },
 	{ .compatible = "nvidia,tegra124-actmon" },
 	{ },
 };
@@ -737,36 +741,7 @@ static struct platform_driver tegra_devfreq_driver = {
 		.of_match_table = tegra_devfreq_of_match,
 	},
 };
-
-static int __init tegra_devfreq_init(void)
-{
-	int ret = 0;
-
-	ret = devfreq_add_governor(&tegra_devfreq_governor);
-	if (ret) {
-		pr_err("%s: failed to add governor: %d\n", __func__, ret);
-		return ret;
-	}
-
-	ret = platform_driver_register(&tegra_devfreq_driver);
-	if (ret)
-		devfreq_remove_governor(&tegra_devfreq_governor);
-
-	return ret;
-}
-module_init(tegra_devfreq_init)
-
-static void __exit tegra_devfreq_exit(void)
-{
-	int ret = 0;
-
-	platform_driver_unregister(&tegra_devfreq_driver);
-
-	ret = devfreq_remove_governor(&tegra_devfreq_governor);
-	if (ret)
-		pr_err("%s: failed to remove governor: %d\n", __func__, ret);
-}
-module_exit(tegra_devfreq_exit)
+module_platform_driver(tegra_devfreq_driver);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Tegra devfreq driver");

diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c
index 52fd5fc..705c620 100644
--- a/drivers/macintosh/windfarm_cpufreq_clamp.c
+++ b/drivers/macintosh/windfarm_cpufreq_clamp.c

@@ -3,9 +3,11 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/pm_qos.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/wait.h>
+#include <linux/cpu.h>
 #include <linux/cpufreq.h>
 
 #include <asm/prom.h>
@@ -16,36 +18,24 @@
 
 static int clamped;
 static struct wf_control *clamp_control;
-
-static int clamp_notifier_call(struct notifier_block *self,
-			       unsigned long event, void *data)
-{
-	struct cpufreq_policy *p = data;
-	unsigned long max_freq;
-
-	if (event != CPUFREQ_ADJUST)
-		return 0;
-
-	max_freq = clamped ? (p->cpuinfo.min_freq) : (p->cpuinfo.max_freq);
-	cpufreq_verify_within_limits(p, 0, max_freq);
-
-	return 0;
-}
-
-static struct notifier_block clamp_notifier = {
-	.notifier_call = clamp_notifier_call,
-};
+static struct dev_pm_qos_request qos_req;
+static unsigned int min_freq, max_freq;
 
 static int clamp_set(struct wf_control *ct, s32 value)
 {
-	if (value)
+	unsigned int freq;
+
+	if (value) {
+		freq = min_freq;
 		printk(KERN_INFO "windfarm: Clamping CPU frequency to "
 		       "minimum !\n");
-	else
+	} else {
+		freq = max_freq;
 		printk(KERN_INFO "windfarm: CPU frequency unclamped !\n");
+	}
 	clamped = value;
-	cpufreq_update_policy(0);
-	return 0;
+
+	return dev_pm_qos_update_request(&qos_req, freq);
 }
 
 static int clamp_get(struct wf_control *ct, s32 *value)
@@ -74,27 +64,60 @@ static const struct wf_control_ops clamp_ops = {
 
 static int __init wf_cpufreq_clamp_init(void)
 {
+	struct cpufreq_policy *policy;
 	struct wf_control *clamp;
+	struct device *dev;
+	int ret;
+
+	policy = cpufreq_cpu_get(0);
+	if (!policy) {
+		pr_warn("%s: cpufreq policy not found cpu0\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	min_freq = policy->cpuinfo.min_freq;
+	max_freq = policy->cpuinfo.max_freq;
+	cpufreq_cpu_put(policy);
+
+	dev = get_cpu_device(0);
+	if (unlikely(!dev)) {
+		pr_warn("%s: No cpu device for cpu0\n", __func__);
+		return -ENODEV;
+	}
 
 	clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
 	if (clamp == NULL)
 		return -ENOMEM;
-	cpufreq_register_notifier(&clamp_notifier, CPUFREQ_POLICY_NOTIFIER);
+
+	ret = dev_pm_qos_add_request(dev, &qos_req, DEV_PM_QOS_MAX_FREQUENCY,
+				     max_freq);
+	if (ret < 0) {
+		pr_err("%s: Failed to add freq constraint (%d)\n", __func__,
+		       ret);
+		goto free;
+	}
+
 	clamp->ops = &clamp_ops;
 	clamp->name = "cpufreq-clamp";
-	if (wf_register_control(clamp))
+	ret = wf_register_control(clamp);
+	if (ret)
 		goto fail;
 	clamp_control = clamp;
 	return 0;
  fail:
+	dev_pm_qos_remove_request(&qos_req);
+
+ free:
 	kfree(clamp);
-	return -ENODEV;
+	return ret;
 }
 
 static void __exit wf_cpufreq_clamp_exit(void)
 {
-	if (clamp_control)
+	if (clamp_control) {
 		wf_unregister_control(clamp_control);
+		dev_pm_qos_remove_request(&qos_req);
+	}
 }
 
 

diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c
index bc0d55a..ef6d4bd 100644
--- a/drivers/platform/x86/intel-hid.c
+++ b/drivers/platform/x86/intel-hid.c

@@ -253,35 +253,45 @@ static void intel_button_array_enable(struct device *device, bool enable)
 
 static int intel_hid_pm_prepare(struct device *device)
 {
+	if (device_may_wakeup(device)) {
+		struct intel_hid_priv *priv = dev_get_drvdata(device);
+
+		priv->wakeup_mode = true;
+	}
+	return 0;
+}
+
+static void intel_hid_pm_complete(struct device *device)
+{
 	struct intel_hid_priv *priv = dev_get_drvdata(device);
 
-	priv->wakeup_mode = true;
-	return 0;
+	priv->wakeup_mode = false;
 }
 
 static int intel_hid_pl_suspend_handler(struct device *device)
 {
-	if (pm_suspend_via_firmware()) {
+	intel_button_array_enable(device, false);
+
+	if (!pm_suspend_no_platform())
 		intel_hid_set_enable(device, false);
-		intel_button_array_enable(device, false);
-	}
+
 	return 0;
 }
 
 static int intel_hid_pl_resume_handler(struct device *device)
 {
-	struct intel_hid_priv *priv = dev_get_drvdata(device);
+	intel_hid_pm_complete(device);
 
-	priv->wakeup_mode = false;
-	if (pm_resume_via_firmware()) {
+	if (!pm_suspend_no_platform())
 		intel_hid_set_enable(device, true);
-		intel_button_array_enable(device, true);
-	}
+
+	intel_button_array_enable(device, true);
 	return 0;
 }
 
 static const struct dev_pm_ops intel_hid_pl_pm_ops = {
 	.prepare = intel_hid_pm_prepare,
+	.complete = intel_hid_pm_complete,
 	.freeze  = intel_hid_pl_suspend_handler,
 	.thaw  = intel_hid_pl_resume_handler,
 	.restore  = intel_hid_pl_resume_handler,
@@ -491,6 +501,12 @@ static int intel_hid_probe(struct platform_device *device)
 	}
 
 	device_init_wakeup(&device->dev, true);
+	/*
+	 * In order for system wakeup to work, the EC GPE has to be marked as
+	 * a wakeup one, so do that here (this setting will persist, but it has
+	 * no effect until the wakeup mask is set for the EC GPE).
+	 */
+	acpi_ec_mark_gpe_for_wake();
 	return 0;
 
 err_remove_notify:

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index a0d0cec..b749323 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c

@@ -176,6 +176,12 @@ static int intel_vbtn_probe(struct platform_device *device)
 		return -EBUSY;
 
 	device_init_wakeup(&device->dev, true);
+	/*
+	 * In order for system wakeup to work, the EC GPE has to be marked as
+	 * a wakeup one, so do that here (this setting will persist, but it has
+	 * no effect until the wakeup mask is set for the EC GPE).
+	 */
+	acpi_ec_mark_gpe_for_wake();
 	return 0;
 }
 
@@ -195,22 +201,30 @@ static int intel_vbtn_remove(struct platform_device *device)
 
 static int intel_vbtn_pm_prepare(struct device *dev)
 {
-	struct intel_vbtn_priv *priv = dev_get_drvdata(dev);
+	if (device_may_wakeup(dev)) {
+		struct intel_vbtn_priv *priv = dev_get_drvdata(dev);
 
-	priv->wakeup_mode = true;
+		priv->wakeup_mode = true;
+	}
 	return 0;
 }
 
-static int intel_vbtn_pm_resume(struct device *dev)
+static void intel_vbtn_pm_complete(struct device *dev)
 {
 	struct intel_vbtn_priv *priv = dev_get_drvdata(dev);
 
 	priv->wakeup_mode = false;
+}
+
+static int intel_vbtn_pm_resume(struct device *dev)
+{
+	intel_vbtn_pm_complete(dev);
 	return 0;
 }
 
 static const struct dev_pm_ops intel_vbtn_pm_ops = {
 	.prepare = intel_vbtn_pm_prepare,
+	.complete = intel_vbtn_pm_complete,
 	.resume = intel_vbtn_pm_resume,
 	.restore = intel_vbtn_pm_resume,
 	.thaw = intel_vbtn_pm_resume,

diff --git a/drivers/powercap/idle_inject.c b/drivers/powercap/idle_inject.c
index 24ff2a0..cd12706 100644
--- a/drivers/powercap/idle_inject.c
+++ b/drivers/powercap/idle_inject.c

@@ -59,14 +59,14 @@ struct idle_inject_thread {
 /**
  * struct idle_inject_device - idle injection data
  * @timer: idle injection period timer
- * @idle_duration_ms: duration of CPU idle time to inject
- * @run_duration_ms: duration of CPU run time to allow
+ * @idle_duration_us: duration of CPU idle time to inject
+ * @run_duration_us: duration of CPU run time to allow
  * @cpumask: mask of CPUs affected by idle injection
  */
 struct idle_inject_device {
 	struct hrtimer timer;
-	unsigned int idle_duration_ms;
-	unsigned int run_duration_ms;
+	unsigned int idle_duration_us;
+	unsigned int run_duration_us;
 	unsigned long int cpumask[0];
 };
 
@@ -104,16 +104,16 @@ static void idle_inject_wakeup(struct idle_inject_device *ii_dev)
  */
 static enum hrtimer_restart idle_inject_timer_fn(struct hrtimer *timer)
 {
-	unsigned int duration_ms;
+	unsigned int duration_us;
 	struct idle_inject_device *ii_dev =
 		container_of(timer, struct idle_inject_device, timer);
 
-	duration_ms = READ_ONCE(ii_dev->run_duration_ms);
-	duration_ms += READ_ONCE(ii_dev->idle_duration_ms);
+	duration_us = READ_ONCE(ii_dev->run_duration_us);
+	duration_us += READ_ONCE(ii_dev->idle_duration_us);
 
 	idle_inject_wakeup(ii_dev);
 
-	hrtimer_forward_now(timer, ms_to_ktime(duration_ms));
+	hrtimer_forward_now(timer, ns_to_ktime(duration_us * NSEC_PER_USEC));
 
 	return HRTIMER_RESTART;
 }
@@ -138,35 +138,35 @@ static void idle_inject_fn(unsigned int cpu)
 	 */
 	iit->should_run = 0;
 
-	play_idle(READ_ONCE(ii_dev->idle_duration_ms));
+	play_idle(READ_ONCE(ii_dev->idle_duration_us));
 }
 
 /**
  * idle_inject_set_duration - idle and run duration update helper
- * @run_duration_ms: CPU run time to allow in milliseconds
- * @idle_duration_ms: CPU idle time to inject in milliseconds
+ * @run_duration_us: CPU run time to allow in microseconds
+ * @idle_duration_us: CPU idle time to inject in microseconds
  */
 void idle_inject_set_duration(struct idle_inject_device *ii_dev,
-			      unsigned int run_duration_ms,
-			      unsigned int idle_duration_ms)
+			      unsigned int run_duration_us,
+			      unsigned int idle_duration_us)
 {
-	if (run_duration_ms && idle_duration_ms) {
-		WRITE_ONCE(ii_dev->run_duration_ms, run_duration_ms);
-		WRITE_ONCE(ii_dev->idle_duration_ms, idle_duration_ms);
+	if (run_duration_us && idle_duration_us) {
+		WRITE_ONCE(ii_dev->run_duration_us, run_duration_us);
+		WRITE_ONCE(ii_dev->idle_duration_us, idle_duration_us);
 	}
 }
 
 /**
  * idle_inject_get_duration - idle and run duration retrieval helper
- * @run_duration_ms: memory location to store the current CPU run time
- * @idle_duration_ms: memory location to store the current CPU idle time
+ * @run_duration_us: memory location to store the current CPU run time
+ * @idle_duration_us: memory location to store the current CPU idle time
  */
 void idle_inject_get_duration(struct idle_inject_device *ii_dev,
-			      unsigned int *run_duration_ms,
-			      unsigned int *idle_duration_ms)
+			      unsigned int *run_duration_us,
+			      unsigned int *idle_duration_us)
 {
-	*run_duration_ms = READ_ONCE(ii_dev->run_duration_ms);
-	*idle_duration_ms = READ_ONCE(ii_dev->idle_duration_ms);
+	*run_duration_us = READ_ONCE(ii_dev->run_duration_us);
+	*idle_duration_us = READ_ONCE(ii_dev->idle_duration_us);
 }
 
 /**
@@ -181,10 +181,10 @@ void idle_inject_get_duration(struct idle_inject_device *ii_dev,
  */
 int idle_inject_start(struct idle_inject_device *ii_dev)
 {
-	unsigned int idle_duration_ms = READ_ONCE(ii_dev->idle_duration_ms);
-	unsigned int run_duration_ms = READ_ONCE(ii_dev->run_duration_ms);
+	unsigned int idle_duration_us = READ_ONCE(ii_dev->idle_duration_us);
+	unsigned int run_duration_us = READ_ONCE(ii_dev->run_duration_us);
 
-	if (!idle_duration_ms || !run_duration_ms)
+	if (!idle_duration_us || !run_duration_us)
 		return -EINVAL;
 
 	pr_debug("Starting injecting idle cycles on CPUs '%*pbl'\n",
@@ -193,7 +193,8 @@ int idle_inject_start(struct idle_inject_device *ii_dev)
 	idle_inject_wakeup(ii_dev);
 
 	hrtimer_start(&ii_dev->timer,
-		      ms_to_ktime(idle_duration_ms + run_duration_ms),
+		      ns_to_ktime((idle_duration_us + run_duration_us) *
+				  NSEC_PER_USEC),
 		      HRTIMER_MODE_REL);
 
 	return 0;

diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 4c5db59..391f397 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c

@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/idr.h>
 #include <linux/pm_opp.h>
+#include <linux/pm_qos.h>
 #include <linux/slab.h>
 #include <linux/cpu.h>
 #include <linux/cpu_cooling.h>
@@ -66,8 +67,6 @@ struct time_in_idle {
  * @last_load: load measured by the latest call to cpufreq_get_requested_power()
  * @cpufreq_state: integer value representing the current state of cpufreq
  *	cooling	devices.
- * @clipped_freq: integer value representing the absolute value of the clipped
- *	frequency.
  * @max_level: maximum cooling level. One less than total number of valid
  *	cpufreq frequencies.
  * @freq_table: Freq table in descending order of frequencies
@@ -84,12 +83,12 @@ struct cpufreq_cooling_device {
 	int id;
 	u32 last_load;
 	unsigned int cpufreq_state;
-	unsigned int clipped_freq;
 	unsigned int max_level;
 	struct freq_table *freq_table;	/* In descending order */
 	struct cpufreq_policy *policy;
 	struct list_head node;
 	struct time_in_idle *idle_time;
+	struct dev_pm_qos_request qos_req;
 };
 
 static DEFINE_IDA(cpufreq_ida);
@@ -119,59 +118,6 @@ static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_cdev,
 }
 
 /**
- * cpufreq_thermal_notifier - notifier callback for cpufreq policy change.
- * @nb:	struct notifier_block * with callback info.
- * @event: value showing cpufreq event for which this function invoked.
- * @data: callback-specific data
- *
- * Callback to hijack the notification on cpufreq policy transition.
- * Every time there is a change in policy, we will intercept and
- * update the cpufreq policy with thermal constraints.
- *
- * Return: 0 (success)
- */
-static int cpufreq_thermal_notifier(struct notifier_block *nb,
-				    unsigned long event, void *data)
-{
-	struct cpufreq_policy *policy = data;
-	unsigned long clipped_freq;
-	struct cpufreq_cooling_device *cpufreq_cdev;
-
-	if (event != CPUFREQ_ADJUST)
-		return NOTIFY_DONE;
-
-	mutex_lock(&cooling_list_lock);
-	list_for_each_entry(cpufreq_cdev, &cpufreq_cdev_list, node) {
-		/*
-		 * A new copy of the policy is sent to the notifier and can't
-		 * compare that directly.
-		 */
-		if (policy->cpu != cpufreq_cdev->policy->cpu)
-			continue;
-
-		/*
-		 * policy->max is the maximum allowed frequency defined by user
-		 * and clipped_freq is the maximum that thermal constraints
-		 * allow.
-		 *
-		 * If clipped_freq is lower than policy->max, then we need to
-		 * readjust policy->max.
-		 *
-		 * But, if clipped_freq is greater than policy->max, we don't
-		 * need to do anything.
-		 */
-		clipped_freq = cpufreq_cdev->clipped_freq;
-
-		if (policy->max > clipped_freq)
-			cpufreq_verify_within_limits(policy, 0, clipped_freq);
-		break;
-	}
-	mutex_unlock(&cooling_list_lock);
-
-	return NOTIFY_OK;
-}
-
-/**
  * update_freq_table() - Update the freq table with power numbers
  * @cpufreq_cdev:	the cpufreq cooling device in which to update the table
  * @capacitance: dynamic power coefficient for these cpus
@@ -374,7 +320,6 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 				 unsigned long state)
 {
 	struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
-	unsigned int clip_freq;
 
 	/* Request state should be less than max_level */
 	if (WARN_ON(state > cpufreq_cdev->max_level))
@@ -384,13 +329,10 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 	if (cpufreq_cdev->cpufreq_state == state)
 		return 0;
 
-	clip_freq = cpufreq_cdev->freq_table[state].frequency;
 	cpufreq_cdev->cpufreq_state = state;
-	cpufreq_cdev->clipped_freq = clip_freq;
 
-	cpufreq_update_policy(cpufreq_cdev->policy->cpu);
-
-	return 0;
+	return dev_pm_qos_update_request(&cpufreq_cdev->qos_req,
+				cpufreq_cdev->freq_table[state].frequency);
 }
 
 /**
@@ -554,11 +496,6 @@ static struct thermal_cooling_device_ops cpufreq_power_cooling_ops = {
 	.power2state		= cpufreq_power2state,
 };
 
-/* Notifier for cpufreq policy change */
-static struct notifier_block thermal_cpufreq_notifier_block = {
-	.notifier_call = cpufreq_thermal_notifier,
-};
-
 static unsigned int find_next_max(struct cpufreq_frequency_table *table,
 				  unsigned int prev_max)
 {
@@ -596,9 +533,16 @@ __cpufreq_cooling_register(struct device_node *np,
 	struct cpufreq_cooling_device *cpufreq_cdev;
 	char dev_name[THERMAL_NAME_LENGTH];
 	unsigned int freq, i, num_cpus;
+	struct device *dev;
 	int ret;
 	struct thermal_cooling_device_ops *cooling_ops;
-	bool first;
+
+	dev = get_cpu_device(policy->cpu);
+	if (unlikely(!dev)) {
+		pr_warn("No cpu device for cpu %d\n", policy->cpu);
+		return ERR_PTR(-ENODEV);
+	}
+
 
 	if (IS_ERR_OR_NULL(policy)) {
 		pr_err("%s: cpufreq policy isn't valid: %p\n", __func__, policy);
@@ -671,25 +615,29 @@ __cpufreq_cooling_register(struct device_node *np,
 		cooling_ops = &cpufreq_cooling_ops;
 	}
 
+	ret = dev_pm_qos_add_request(dev, &cpufreq_cdev->qos_req,
+				     DEV_PM_QOS_MAX_FREQUENCY,
+				     cpufreq_cdev->freq_table[0].frequency);
+	if (ret < 0) {
+		pr_err("%s: Failed to add freq constraint (%d)\n", __func__,
+		       ret);
+		cdev = ERR_PTR(ret);
+		goto remove_ida;
+	}
+
 	cdev = thermal_of_cooling_device_register(np, dev_name, cpufreq_cdev,
 						  cooling_ops);
 	if (IS_ERR(cdev))
-		goto remove_ida;
-
-	cpufreq_cdev->clipped_freq = cpufreq_cdev->freq_table[0].frequency;
+		goto remove_qos_req;
 
 	mutex_lock(&cooling_list_lock);
-	/* Register the notifier for first cpufreq cooling device */
-	first = list_empty(&cpufreq_cdev_list);
 	list_add(&cpufreq_cdev->node, &cpufreq_cdev_list);
 	mutex_unlock(&cooling_list_lock);
 
-	if (first)
-		cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
-					  CPUFREQ_POLICY_NOTIFIER);
-
 	return cdev;
 
+remove_qos_req:
+	dev_pm_qos_remove_request(&cpufreq_cdev->qos_req);
 remove_ida:
 	ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id);
 free_table:
@@ -777,7 +725,6 @@ EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register);
 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 {
 	struct cpufreq_cooling_device *cpufreq_cdev;
-	bool last;
 
 	if (!cdev)
 		return;
@@ -786,15 +733,10 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 
 	mutex_lock(&cooling_list_lock);
 	list_del(&cpufreq_cdev->node);
-	/* Unregister the notifier for the last cpufreq cooling device */
-	last = list_empty(&cpufreq_cdev_list);
 	mutex_unlock(&cooling_list_lock);
 
-	if (last)
-		cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
-					    CPUFREQ_POLICY_NOTIFIER);
-
 	thermal_cooling_device_unregister(cdev);
+	dev_pm_qos_remove_request(&cpufreq_cdev->qos_req);
 	ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id);
 	kfree(cpufreq_cdev->idle_time);
 	kfree(cpufreq_cdev->freq_table);

diff --git a/drivers/thermal/intel/intel_powerclamp.c b/drivers/thermal/intel/intel_powerclamp.c
index 5149a81..53216dc 100644
--- a/drivers/thermal/intel/intel_powerclamp.c
+++ b/drivers/thermal/intel/intel_powerclamp.c

@@ -430,7 +430,7 @@ static void clamp_idle_injection_func(struct kthread_work *work)
 	if (should_skip)
 		goto balance;
 
-	play_idle(jiffies_to_msecs(w_data->duration_jiffies));
+	play_idle(jiffies_to_usecs(w_data->duration_jiffies));
 
 balance:
 	if (clamping && w_data->clamping && cpu_online(w_data->cpu))

diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index 4282cb1..f70c9f7 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c

@@ -1678,24 +1678,6 @@ pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
 	}
 	return 0;
 }
-
-static int
-pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data)
-{
-	struct pxafb_info *fbi = TO_INF(nb, freq_policy);
-	struct fb_var_screeninfo *var = &fbi->fb.var;
-	struct cpufreq_policy *policy = data;
-
-	switch (val) {
-	case CPUFREQ_ADJUST:
-		pr_debug("min dma period: %d ps, "
-			"new clock %d kHz\n", pxafb_display_dma_period(var),
-			policy->max);
-		/* TODO: fill in min/max values */
-		break;
-	}
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_PM
@@ -2400,11 +2382,8 @@ static int pxafb_probe(struct platform_device *dev)
 
 #ifdef CONFIG_CPU_FREQ
 	fbi->freq_transition.notifier_call = pxafb_freq_transition;
-	fbi->freq_policy.notifier_call = pxafb_freq_policy;
 	cpufreq_register_notifier(&fbi->freq_transition,
 				CPUFREQ_TRANSITION_NOTIFIER);
-	cpufreq_register_notifier(&fbi->freq_policy,
-				CPUFREQ_POLICY_NOTIFIER);
 #endif
 
 	/*

diff --git a/drivers/video/fbdev/pxafb.h b/drivers/video/fbdev/pxafb.h
index b641289..86b1e9a 100644
--- a/drivers/video/fbdev/pxafb.h
+++ b/drivers/video/fbdev/pxafb.h

@@ -162,7 +162,6 @@ struct pxafb_info {
 
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block	freq_transition;
-	struct notifier_block	freq_policy;
 #endif
 
 	struct regulator *lcd_supply;

diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index f7f8dee..ae2bcfe 100644
--- a/drivers/video/fbdev/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c

@@ -1005,31 +1005,6 @@ sa1100fb_freq_transition(struct notifier_block *nb, unsigned long val,
 	}
 	return 0;
 }
-
-static int
-sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val,
-		     void *data)
-{
-	struct sa1100fb_info *fbi = TO_INF(nb, freq_policy);
-	struct cpufreq_policy *policy = data;
-
-	switch (val) {
-	case CPUFREQ_ADJUST:
-		dev_dbg(fbi->dev, "min dma period: %d ps, "
-			"new clock %d kHz\n", sa1100fb_min_dma_period(fbi),
-			policy->max);
-		/* todo: fill in min/max values */
-		break;
-	case CPUFREQ_NOTIFY:
-		do {} while(0);
-		/* todo: panic if min/max values aren't fulfilled 
-		 * [can't really happen unless there's a bug in the
-		 * CPU policy verififcation process *
-		 */
-		break;
-	}
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_PM
@@ -1242,9 +1217,7 @@ static int sa1100fb_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_CPU_FREQ
 	fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
-	fbi->freq_policy.notifier_call = sa1100fb_freq_policy;
 	cpufreq_register_notifier(&fbi->freq_transition, CPUFREQ_TRANSITION_NOTIFIER);
-	cpufreq_register_notifier(&fbi->freq_policy, CPUFREQ_POLICY_NOTIFIER);
 #endif
 
 	/* This driver cannot be unloaded at the moment */

diff --git a/drivers/video/fbdev/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
index 7a1a9ca..d0aa33b 100644
--- a/drivers/video/fbdev/sa1100fb.h
+++ b/drivers/video/fbdev/sa1100fb.h

@@ -64,7 +64,6 @@ struct sa1100fb_info {
 
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block	freq_transition;
-	struct notifier_block	freq_policy;
 #endif
 
 	const struct sa1100fb_mach_info *inf;

diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index d7f1f50..c4159bc 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c

@@ -1459,13 +1459,13 @@ static int ep_create_wakeup_source(struct epitem *epi)
 	struct wakeup_source *ws;
 
 	if (!epi->ep->ws) {
-		epi->ep->ws = wakeup_source_register("eventpoll");
+		epi->ep->ws = wakeup_source_register(NULL, "eventpoll");
 		if (!epi->ep->ws)
 			return -ENOMEM;
 	}
 
 	name = epi->ffd.file->f_path.dentry->d_name.name;
-	ws = wakeup_source_register(name);
+	ws = wakeup_source_register(NULL, name);
 
 	if (!ws)
 		return -ENOMEM;

diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 3845c8f..4ed603a 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h

@@ -297,6 +297,9 @@ ACPI_GLOBAL(u8, acpi_gbl_system_awake_and_running);
 #define ACPI_HW_DEPENDENT_RETURN_OK(prototype) \
 	ACPI_EXTERNAL_RETURN_OK(prototype)
 
+#define ACPI_HW_DEPENDENT_RETURN_UINT32(prototype) \
+	ACPI_EXTERNAL_RETURN_UINT32(prototype)
+
 #define ACPI_HW_DEPENDENT_RETURN_VOID(prototype) \
 	ACPI_EXTERNAL_RETURN_VOID(prototype)
 
@@ -307,6 +310,9 @@ ACPI_GLOBAL(u8, acpi_gbl_system_awake_and_running);
 #define ACPI_HW_DEPENDENT_RETURN_OK(prototype) \
 	static ACPI_INLINE prototype {return(AE_OK);}
 
+#define ACPI_HW_DEPENDENT_RETURN_UINT32(prototype) \
+	static ACPI_INLINE prototype {return(0);}
+
 #define ACPI_HW_DEPENDENT_RETURN_VOID(prototype) \
 	static ACPI_INLINE prototype {return;}
 
@@ -738,7 +744,7 @@ ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
 						     u32 gpe_number,
 						     acpi_event_status
 						     *event_status))
-ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_dispatch_gpe(acpi_handle gpe_device, u32 gpe_number))
+ACPI_HW_DEPENDENT_RETURN_UINT32(u32 acpi_dispatch_gpe(acpi_handle gpe_device, u32 gpe_number))
 ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable_all_gpes(void))
 ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable_all_runtime_gpes(void))
 ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable_all_wakeup_gpes(void))

diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 1194a4c..f936033 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h

@@ -4,6 +4,8 @@
 
 #include <linux/kernel.h>
 #include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/pm_qos.h>
 #include <linux/thermal.h>
 #include <asm/acpi.h>
 
@@ -230,6 +232,8 @@ struct acpi_processor {
 	struct acpi_processor_limit limit;
 	struct thermal_cooling_device *cdev;
 	struct device *dev; /* Processor device. */
+	struct dev_pm_qos_request perflib_req;
+	struct dev_pm_qos_request thermal_req;
 };
 
 struct acpi_processor_errata {
@@ -296,16 +300,22 @@ static inline void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx
 /* in processor_perflib.c */
 
 #ifdef CONFIG_CPU_FREQ
-void acpi_processor_ppc_init(void);
-void acpi_processor_ppc_exit(void);
+extern bool acpi_processor_cpufreq_init;
+void acpi_processor_ignore_ppc_init(void);
+void acpi_processor_ppc_init(int cpu);
+void acpi_processor_ppc_exit(int cpu);
 void acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag);
 extern int acpi_processor_get_bios_limit(int cpu, unsigned int *limit);
 #else
-static inline void acpi_processor_ppc_init(void)
+static inline void acpi_processor_ignore_ppc_init(void)
 {
 	return;
 }
-static inline void acpi_processor_ppc_exit(void)
+static inline void acpi_processor_ppc_init(int cpu)
+{
+	return;
+}
+static inline void acpi_processor_ppc_exit(int cpu)
 {
 	return;
 }
@@ -421,14 +431,14 @@ static inline int acpi_processor_hotplug(struct acpi_processor *pr)
 int acpi_processor_get_limit_info(struct acpi_processor *pr);
 extern const struct thermal_cooling_device_ops processor_cooling_ops;
 #if defined(CONFIG_ACPI_CPU_FREQ_PSS) & defined(CONFIG_CPU_FREQ)
-void acpi_thermal_cpufreq_init(void);
-void acpi_thermal_cpufreq_exit(void);
+void acpi_thermal_cpufreq_init(int cpu);
+void acpi_thermal_cpufreq_exit(int cpu);
 #else
-static inline void acpi_thermal_cpufreq_init(void)
+static inline void acpi_thermal_cpufreq_init(int cpu)
 {
 	return;
 }
-static inline void acpi_thermal_cpufreq_exit(void)
+static inline void acpi_thermal_cpufreq_exit(int cpu)
 {
 	return;
 }

diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 9426b9a..e65a4c5 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h

@@ -931,6 +931,8 @@ int acpi_subsys_suspend_noirq(struct device *dev);
 int acpi_subsys_suspend(struct device *dev);
 int acpi_subsys_freeze(struct device *dev);
 int acpi_subsys_poweroff(struct device *dev);
+void acpi_ec_mark_gpe_for_wake(void);
+void acpi_ec_set_gpe_wake_mask(u8 action);
 #else
 static inline int acpi_subsys_prepare(struct device *dev) { return 0; }
 static inline void acpi_subsys_complete(struct device *dev) {}
@@ -939,6 +941,8 @@ static inline int acpi_subsys_suspend_noirq(struct device *dev) { return 0; }
 static inline int acpi_subsys_suspend(struct device *dev) { return 0; }
 static inline int acpi_subsys_freeze(struct device *dev) { return 0; }
 static inline int acpi_subsys_poweroff(struct device *dev) { return 0; }
+static inline void acpi_ec_mark_gpe_for_wake(void) {}
+static inline void acpi_ec_set_gpe_wake_mask(u8 action) {}
 #endif
 
 #ifdef CONFIG_ACPI

diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index fcb1386..88dc0c6 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h

@@ -179,7 +179,7 @@ void arch_cpu_idle_dead(void);
 int cpu_report_state(int cpu);
 int cpu_check_up_prepare(int cpu);
 void cpu_set_state_online(int cpu);
-void play_idle(unsigned long duration_ms);
+void play_idle(unsigned long duration_us);
 
 #ifdef CONFIG_HOTPLUG_CPU
 bool cpu_wait_death(unsigned int cpu, int seconds);

diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 536a049..c57e88e 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h

@@ -456,8 +456,8 @@ static inline void cpufreq_resume(void) {}
 #define CPUFREQ_POSTCHANGE		(1)
 
 /* Policy Notifiers  */
-#define CPUFREQ_ADJUST			(0)
-#define CPUFREQ_NOTIFY			(1)
+#define CPUFREQ_CREATE_POLICY		(0)
+#define CPUFREQ_REMOVE_POLICY		(1)
 
 #ifdef CONFIG_CPU_FREQ
 int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list);

diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index bb9a0db..2dc4c6b 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h

@@ -85,7 +85,9 @@ struct cpuidle_device {
 	unsigned int		cpu;
 	ktime_t			next_hrtimer;
 
+	int			last_state_idx;
 	int			last_residency;
+	u64			poll_limit_ns;
 	struct cpuidle_state_usage	states_usage[CPUIDLE_STATE_MAX];
 	struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX];
 	struct cpuidle_driver_kobj *kobj_driver;
@@ -119,6 +121,9 @@ struct cpuidle_driver {
 
 	/* the driver handles the cpus in cpumask */
 	struct cpumask		*cpumask;
+
+	/* preferred governor to switch at register time */
+	const char		*governor;
 };
 
 #ifdef CONFIG_CPU_IDLE
@@ -132,6 +137,8 @@ extern int cpuidle_select(struct cpuidle_driver *drv,
 extern int cpuidle_enter(struct cpuidle_driver *drv,
 			 struct cpuidle_device *dev, int index);
 extern void cpuidle_reflect(struct cpuidle_device *dev, int index);
+extern u64 cpuidle_poll_time(struct cpuidle_driver *drv,
+			     struct cpuidle_device *dev);
 
 extern int cpuidle_register_driver(struct cpuidle_driver *drv);
 extern struct cpuidle_driver *cpuidle_get_driver(void);
@@ -166,6 +173,9 @@ static inline int cpuidle_enter(struct cpuidle_driver *drv,
 				struct cpuidle_device *dev, int index)
 {return -ENODEV; }
 static inline void cpuidle_reflect(struct cpuidle_device *dev, int index) { }
+static inline u64 cpuidle_poll_time(struct cpuidle_driver *drv,
+			     struct cpuidle_device *dev)
+{return 0; }
 static inline int cpuidle_register_driver(struct cpuidle_driver *drv)
 {return -ENODEV; }
 static inline struct cpuidle_driver *cpuidle_get_driver(void) {return NULL; }

diff --git a/include/linux/cpuidle_haltpoll.h b/include/linux/cpuidle_haltpoll.h
new file mode 100644
index 0000000..d50c1e0
--- /dev/null
+++ b/include/linux/cpuidle_haltpoll.h

@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _CPUIDLE_HALTPOLL_H
+#define _CPUIDLE_HALTPOLL_H
+
+#ifdef CONFIG_ARCH_CPUIDLE_HALTPOLL
+#include <asm/cpuidle_haltpoll.h>
+#else
+static inline void arch_haltpoll_enable(unsigned int cpu)
+{
+}
+
+static inline void arch_haltpoll_disable(unsigned int cpu)
+{
+}
+#endif
+#endif

diff --git a/include/linux/devfreq-event.h b/include/linux/devfreq-event.h
index 29fc0dd..f14f17f 100644
--- a/include/linux/devfreq-event.h
+++ b/include/linux/devfreq-event.h

@@ -78,14 +78,20 @@ struct devfreq_event_ops {
  * struct devfreq_event_desc - the descriptor of devfreq-event device
  *
  * @name	: the name of devfreq-event device.
+ * @event_type	: the type of the event determined and used by driver
  * @driver_data	: the private data for devfreq-event driver.
  * @ops		: the operation to control devfreq-event device.
  *
  * Each devfreq-event device is described with a this structure.
  * This structure contains the various data for devfreq-event device.
+ * The event_type describes what is going to be counted in the register.
+ * It might choose to count e.g. read requests, write data in bytes, etc.
+ * The full supported list of types is present in specyfic header in:
+ * include/dt-bindings/pmu/.
  */
 struct devfreq_event_desc {
 	const char *name;
+	u32 event_type;
 	void *driver_data;
 
 	const struct devfreq_event_ops *ops;

diff --git a/include/linux/idle_inject.h b/include/linux/idle_inject.h
index bdc0293..a445cd1 100644
--- a/include/linux/idle_inject.h
+++ b/include/linux/idle_inject.h

@@ -20,10 +20,10 @@ int idle_inject_start(struct idle_inject_device *ii_dev);
 void idle_inject_stop(struct idle_inject_device *ii_dev);
 
 void idle_inject_set_duration(struct idle_inject_device *ii_dev,
-				 unsigned int run_duration_ms,
-				 unsigned int idle_duration_ms);
+				 unsigned int run_duration_us,
+				 unsigned int idle_duration_us);
 
 void idle_inject_get_duration(struct idle_inject_device *ii_dev,
-				 unsigned int *run_duration_ms,
-				 unsigned int *idle_duration_ms);
+				 unsigned int *run_duration_us,
+				 unsigned int *idle_duration_us);
 #endif /* __IDLE_INJECT_H__ */

diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 5b8328a..0e9cdb3 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h

@@ -238,6 +238,7 @@ extern void teardown_percpu_nmi(unsigned int irq);
 /* The following three functions are for the core kernel use only. */
 extern void suspend_device_irqs(void);
 extern void resume_device_irqs(void);
+extern void rearm_wake_irq(unsigned int irq);
 
 /**
  * struct irq_affinity_notify - context for notification of IRQ affinity changes

diff --git a/include/linux/pm.h b/include/linux/pm.h
index 3619a87..4c441be0 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h

@@ -712,8 +712,6 @@ struct dev_pm_domain {
 extern void device_pm_lock(void);
 extern void dpm_resume_start(pm_message_t state);
 extern void dpm_resume_end(pm_message_t state);
-extern void dpm_noirq_resume_devices(pm_message_t state);
-extern void dpm_noirq_end(void);
 extern void dpm_resume_noirq(pm_message_t state);
 extern void dpm_resume_early(pm_message_t state);
 extern void dpm_resume(pm_message_t state);
@@ -722,8 +720,6 @@ extern void dpm_complete(pm_message_t state);
 extern void device_pm_unlock(void);
 extern int dpm_suspend_end(pm_message_t state);
 extern int dpm_suspend_start(pm_message_t state);
-extern void dpm_noirq_begin(void);
-extern int dpm_noirq_suspend_devices(pm_message_t state);
 extern int dpm_suspend_noirq(pm_message_t state);
 extern int dpm_suspend_late(pm_message_t state);
 extern int dpm_suspend(pm_message_t state);

diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 91d9bf4..baf02ff 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h

@@ -197,9 +197,9 @@ static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev)
 int pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev);
 int pm_genpd_remove_device(struct device *dev);
 int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
-			   struct generic_pm_domain *new_subdomain);
+			   struct generic_pm_domain *subdomain);
 int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
-			      struct generic_pm_domain *target);
+			      struct generic_pm_domain *subdomain);
 int pm_genpd_init(struct generic_pm_domain *genpd,
 		  struct dev_power_governor *gov, bool is_off);
 int pm_genpd_remove(struct generic_pm_domain *genpd);
@@ -226,12 +226,12 @@ static inline int pm_genpd_remove_device(struct device *dev)
 	return -ENOSYS;
 }
 static inline int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
-					 struct generic_pm_domain *new_sd)
+					 struct generic_pm_domain *subdomain)
 {
 	return -ENOSYS;
 }
 static inline int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
-					    struct generic_pm_domain *target)
+					    struct generic_pm_domain *subdomain)
 {
 	return -ENOSYS;
 }
@@ -282,8 +282,8 @@ int of_genpd_add_provider_onecell(struct device_node *np,
 				  struct genpd_onecell_data *data);
 void of_genpd_del_provider(struct device_node *np);
 int of_genpd_add_device(struct of_phandle_args *args, struct device *dev);
-int of_genpd_add_subdomain(struct of_phandle_args *parent,
-			   struct of_phandle_args *new_subdomain);
+int of_genpd_add_subdomain(struct of_phandle_args *parent_spec,
+			   struct of_phandle_args *subdomain_spec);
 struct generic_pm_domain *of_genpd_remove_last(struct device_node *np);
 int of_genpd_parse_idle_states(struct device_node *dn,
 			       struct genpd_power_state **states, int *n);
@@ -316,8 +316,8 @@ static inline int of_genpd_add_device(struct of_phandle_args *args,
 	return -ENODEV;
 }
 
-static inline int of_genpd_add_subdomain(struct of_phandle_args *parent,
-					 struct of_phandle_args *new_subdomain)
+static inline int of_genpd_add_subdomain(struct of_phandle_args *parent_spec,
+					 struct of_phandle_args *subdomain_spec)
 {
 	return -ENODEV;
 }

diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index 2aebbc5..222c3e0 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h

@@ -13,9 +13,6 @@
 enum {
 	PM_QOS_RESERVED = 0,
 	PM_QOS_CPU_DMA_LATENCY,
-	PM_QOS_NETWORK_LATENCY,
-	PM_QOS_NETWORK_THROUGHPUT,
-	PM_QOS_MEMORY_BANDWIDTH,
 
 	/* insert new class ID */
 	PM_QOS_NUM_CLASSES,
@@ -33,9 +30,6 @@ enum pm_qos_flags_status {
 #define PM_QOS_LATENCY_ANY_NS	((s64)PM_QOS_LATENCY_ANY * NSEC_PER_USEC)
 
 #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
-#define PM_QOS_NETWORK_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
-#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE	0
-#define PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE	0
 #define PM_QOS_RESUME_LATENCY_DEFAULT_VALUE	PM_QOS_LATENCY_ANY
 #define PM_QOS_RESUME_LATENCY_NO_CONSTRAINT	PM_QOS_LATENCY_ANY
 #define PM_QOS_RESUME_LATENCY_NO_CONSTRAINT_NS	PM_QOS_LATENCY_ANY_NS

diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
index 9102760..661efa0 100644
--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h

@@ -21,6 +21,7 @@ struct wake_irq;
  * struct wakeup_source - Representation of wakeup sources
  *
  * @name: Name of the wakeup source
+ * @id: Wakeup source id
  * @entry: Wakeup source list entry
  * @lock: Wakeup source lock
  * @wakeirq: Optional device specific wakeirq
@@ -35,11 +36,13 @@ struct wake_irq;
  * @relax_count: Number of times the wakeup source was deactivated.
  * @expire_count: Number of times the wakeup source's timeout has expired.
  * @wakeup_count: Number of times the wakeup source might abort suspend.
+ * @dev: Struct device for sysfs statistics about the wakeup source.
  * @active: Status of the wakeup source.
  * @autosleep_enabled: Autosleep is active, so update @prevent_sleep_time.
  */
 struct wakeup_source {
 	const char 		*name;
+	int			id;
 	struct list_head	entry;
 	spinlock_t		lock;
 	struct wake_irq		*wakeirq;
@@ -55,6 +58,7 @@ struct wakeup_source {
 	unsigned long		relax_count;
 	unsigned long		expire_count;
 	unsigned long		wakeup_count;
+	struct device		*dev;
 	bool			active:1;
 	bool			autosleep_enabled:1;
 };
@@ -81,12 +85,12 @@ static inline void device_set_wakeup_path(struct device *dev)
 }
 
 /* drivers/base/power/wakeup.c */
-extern void wakeup_source_prepare(struct wakeup_source *ws, const char *name);
 extern struct wakeup_source *wakeup_source_create(const char *name);
 extern void wakeup_source_destroy(struct wakeup_source *ws);
 extern void wakeup_source_add(struct wakeup_source *ws);
 extern void wakeup_source_remove(struct wakeup_source *ws);
-extern struct wakeup_source *wakeup_source_register(const char *name);
+extern struct wakeup_source *wakeup_source_register(struct device *dev,
+						    const char *name);
 extern void wakeup_source_unregister(struct wakeup_source *ws);
 extern int device_wakeup_enable(struct device *dev);
 extern int device_wakeup_disable(struct device *dev);
@@ -112,9 +116,6 @@ static inline bool device_can_wakeup(struct device *dev)
 	return dev->power.can_wakeup;
 }
 
-static inline void wakeup_source_prepare(struct wakeup_source *ws,
-					 const char *name) {}
-
 static inline struct wakeup_source *wakeup_source_create(const char *name)
 {
 	return NULL;
@@ -126,7 +127,8 @@ static inline void wakeup_source_add(struct wakeup_source *ws) {}
 
 static inline void wakeup_source_remove(struct wakeup_source *ws) {}
 
-static inline struct wakeup_source *wakeup_source_register(const char *name)
+static inline struct wakeup_source *wakeup_source_register(struct device *dev,
+							   const char *name)
 {
 	return NULL;
 }
@@ -181,13 +183,6 @@ static inline void pm_wakeup_dev_event(struct device *dev, unsigned int msec,
 
 #endif /* !CONFIG_PM_SLEEP */
 
-static inline void wakeup_source_init(struct wakeup_source *ws,
-				      const char *name)
-{
-	wakeup_source_prepare(ws, name);
-	wakeup_source_add(ws);
-}
-
 static inline void __pm_wakeup_event(struct wakeup_source *ws, unsigned int msec)
 {
 	return pm_wakeup_ws_event(ws, msec, false);

diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 9c0ad1a..6fc8843 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h

@@ -190,8 +190,9 @@ struct platform_suspend_ops {
 struct platform_s2idle_ops {
 	int (*begin)(void);
 	int (*prepare)(void);
+	int (*prepare_late)(void);
 	void (*wake)(void);
-	void (*sync)(void);
+	void (*restore_early)(void);
 	void (*restore)(void);
 	void (*end)(void);
 };
@@ -336,6 +337,7 @@ static inline void pm_set_suspend_via_firmware(void) {}
 static inline void pm_set_resume_via_firmware(void) {}
 static inline bool pm_suspend_via_firmware(void) { return false; }
 static inline bool pm_resume_via_firmware(void) { return false; }
+static inline bool pm_suspend_no_platform(void) { return false; }
 static inline bool pm_suspend_default_s2idle(void) { return false; }
 
 static inline void suspend_set_ops(const struct platform_suspend_ops *ops) {}

diff --git a/include/trace/events/power.h b/include/trace/events/power.h
index f7aece7..7457e23 100644
--- a/include/trace/events/power.h
+++ b/include/trace/events/power.h

@@ -379,9 +379,7 @@ DECLARE_EVENT_CLASS(pm_qos_request,
 
 	TP_printk("pm_qos_class=%s value=%d",
 		  __print_symbolic(__entry->pm_qos_class,
-			{ PM_QOS_CPU_DMA_LATENCY,	"CPU_DMA_LATENCY" },
-			{ PM_QOS_NETWORK_LATENCY,	"NETWORK_LATENCY" },
-			{ PM_QOS_NETWORK_THROUGHPUT,	"NETWORK_THROUGHPUT" }),
+			{ PM_QOS_CPU_DMA_LATENCY,	"CPU_DMA_LATENCY" }),
 		  __entry->value)
 );
 
@@ -426,9 +424,7 @@ TRACE_EVENT(pm_qos_update_request_timeout,
 
 	TP_printk("pm_qos_class=%s value=%d, timeout_us=%ld",
 		  __print_symbolic(__entry->pm_qos_class,
-			{ PM_QOS_CPU_DMA_LATENCY,	"CPU_DMA_LATENCY" },
-			{ PM_QOS_NETWORK_LATENCY,	"NETWORK_LATENCY" },
-			{ PM_QOS_NETWORK_THROUGHPUT,	"NETWORK_THROUGHPUT" }),
+			{ PM_QOS_CPU_DMA_LATENCY,	"CPU_DMA_LATENCY" }),
 		  __entry->value, __entry->timeout_us)
 );
 

diff --git a/kernel/irq/pm.c b/kernel/irq/pm.c
index d6961d3..8f557fa 100644
--- a/kernel/irq/pm.c
+++ b/kernel/irq/pm.c

@@ -177,6 +177,26 @@ static void resume_irqs(bool want_early)
 }
 
 /**
+ * rearm_wake_irq - rearm a wakeup interrupt line after signaling wakeup
+ * @irq: Interrupt to rearm
+ */
+void rearm_wake_irq(unsigned int irq)
+{
+	unsigned long flags;
+	struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
+
+	if (!desc || !(desc->istate & IRQS_SUSPENDED) ||
+	    !irqd_is_wakeup_set(&desc->irq_data))
+		return;
+
+	desc->istate &= ~IRQS_SUSPENDED;
+	irqd_set(&desc->irq_data, IRQD_WAKEUP_ARMED);
+	__enable_irq(desc);
+
+	irq_put_desc_busunlock(desc, flags);
+}
+
+/**
  * irq_pm_syscore_ops - enable interrupt lines early
  *
  * Enable all interrupt lines with %IRQF_EARLY_RESUME set.

diff --git a/kernel/power/autosleep.c b/kernel/power/autosleep.c
index 41e83a7..9af5a50 100644
--- a/kernel/power/autosleep.c
+++ b/kernel/power/autosleep.c

@@ -116,7 +116,7 @@ int pm_autosleep_set_state(suspend_state_t state)
 
 int __init pm_autosleep_init(void)
 {
-	autosleep_ws = wakeup_source_register("autosleep");
+	autosleep_ws = wakeup_source_register(NULL, "autosleep");
 	if (!autosleep_ws)
 		return -ENOMEM;
 

diff --git a/kernel/power/main.c b/kernel/power/main.c
index bdbd605..e8710d1 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c

@@ -254,7 +254,6 @@ static ssize_t pm_test_store(struct kobject *kobj, struct kobj_attribute *attr,
 power_attr(pm_test);
 #endif /* CONFIG_PM_SLEEP_DEBUG */
 
-#ifdef CONFIG_DEBUG_FS
 static char *suspend_step_name(enum suspend_stat_step step)
 {
 	switch (step) {
@@ -275,6 +274,92 @@ static char *suspend_step_name(enum suspend_stat_step step)
 	}
 }
 
+#define suspend_attr(_name)					\
+static ssize_t _name##_show(struct kobject *kobj,		\
+		struct kobj_attribute *attr, char *buf)		\
+{								\
+	return sprintf(buf, "%d\n", suspend_stats._name);	\
+}								\
+static struct kobj_attribute _name = __ATTR_RO(_name)
+
+suspend_attr(success);
+suspend_attr(fail);
+suspend_attr(failed_freeze);
+suspend_attr(failed_prepare);
+suspend_attr(failed_suspend);
+suspend_attr(failed_suspend_late);
+suspend_attr(failed_suspend_noirq);
+suspend_attr(failed_resume);
+suspend_attr(failed_resume_early);
+suspend_attr(failed_resume_noirq);
+
+static ssize_t last_failed_dev_show(struct kobject *kobj,
+		struct kobj_attribute *attr, char *buf)
+{
+	int index;
+	char *last_failed_dev = NULL;
+
+	index = suspend_stats.last_failed_dev + REC_FAILED_NUM - 1;
+	index %= REC_FAILED_NUM;
+	last_failed_dev = suspend_stats.failed_devs[index];
+
+	return sprintf(buf, "%s\n", last_failed_dev);
+}
+static struct kobj_attribute last_failed_dev = __ATTR_RO(last_failed_dev);
+
+static ssize_t last_failed_errno_show(struct kobject *kobj,
+		struct kobj_attribute *attr, char *buf)
+{
+	int index;
+	int last_failed_errno;
+
+	index = suspend_stats.last_failed_errno + REC_FAILED_NUM - 1;
+	index %= REC_FAILED_NUM;
+	last_failed_errno = suspend_stats.errno[index];
+
+	return sprintf(buf, "%d\n", last_failed_errno);
+}
+static struct kobj_attribute last_failed_errno = __ATTR_RO(last_failed_errno);
+
+static ssize_t last_failed_step_show(struct kobject *kobj,
+		struct kobj_attribute *attr, char *buf)
+{
+	int index;
+	enum suspend_stat_step step;
+	char *last_failed_step = NULL;
+
+	index = suspend_stats.last_failed_step + REC_FAILED_NUM - 1;
+	index %= REC_FAILED_NUM;
+	step = suspend_stats.failed_steps[index];
+	last_failed_step = suspend_step_name(step);
+
+	return sprintf(buf, "%s\n", last_failed_step);
+}
+static struct kobj_attribute last_failed_step = __ATTR_RO(last_failed_step);
+
+static struct attribute *suspend_attrs[] = {
+	&success.attr,
+	&fail.attr,
+	&failed_freeze.attr,
+	&failed_prepare.attr,
+	&failed_suspend.attr,
+	&failed_suspend_late.attr,
+	&failed_suspend_noirq.attr,
+	&failed_resume.attr,
+	&failed_resume_early.attr,
+	&failed_resume_noirq.attr,
+	&last_failed_dev.attr,
+	&last_failed_errno.attr,
+	&last_failed_step.attr,
+	NULL,
+};
+
+static struct attribute_group suspend_attr_group = {
+	.name = "suspend_stats",
+	.attrs = suspend_attrs,
+};
+
+#ifdef CONFIG_DEBUG_FS
 static int suspend_stats_show(struct seq_file *s, void *unused)
 {
 	int i, index, last_dev, last_errno, last_step;
@@ -495,7 +580,7 @@ static suspend_state_t decode_state(const char *buf, size_t n)
 	len = p ? p - buf : n;
 
 	/* Check hibernation first. */
-	if (len == 4 && !strncmp(buf, "disk", len))
+	if (len == 4 && str_has_prefix(buf, "disk"))
 		return PM_SUSPEND_MAX;
 
 #ifdef CONFIG_SUSPEND
@@ -794,6 +879,14 @@ static const struct attribute_group attr_group = {
 	.attrs = g,
 };
 
+static const struct attribute_group *attr_groups[] = {
+	&attr_group,
+#ifdef CONFIG_PM_SLEEP
+	&suspend_attr_group,
+#endif
+	NULL,
+};
+
 struct workqueue_struct *pm_wq;
 EXPORT_SYMBOL_GPL(pm_wq);
 
@@ -815,7 +908,7 @@ static int __init pm_init(void)
 	power_kobj = kobject_create_and_add("power", NULL);
 	if (!power_kobj)
 		return -ENOMEM;
-	error = sysfs_create_group(power_kobj, &attr_group);
+	error = sysfs_create_groups(power_kobj, attr_groups);
 	if (error)
 		return error;
 	pm_print_times_init();

diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 33e3feb..9568a2f 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c

@@ -78,57 +78,9 @@ static struct pm_qos_object cpu_dma_pm_qos = {
 	.name = "cpu_dma_latency",
 };
 
-static BLOCKING_NOTIFIER_HEAD(network_lat_notifier);
-static struct pm_qos_constraints network_lat_constraints = {
-	.list = PLIST_HEAD_INIT(network_lat_constraints.list),
-	.target_value = PM_QOS_NETWORK_LAT_DEFAULT_VALUE,
-	.default_value = PM_QOS_NETWORK_LAT_DEFAULT_VALUE,
-	.no_constraint_value = PM_QOS_NETWORK_LAT_DEFAULT_VALUE,
-	.type = PM_QOS_MIN,
-	.notifiers = &network_lat_notifier,
-};
-static struct pm_qos_object network_lat_pm_qos = {
-	.constraints = &network_lat_constraints,
-	.name = "network_latency",
-};
-
-
-static BLOCKING_NOTIFIER_HEAD(network_throughput_notifier);
-static struct pm_qos_constraints network_tput_constraints = {
-	.list = PLIST_HEAD_INIT(network_tput_constraints.list),
-	.target_value = PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE,
-	.default_value = PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE,
-	.no_constraint_value = PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE,
-	.type = PM_QOS_MAX,
-	.notifiers = &network_throughput_notifier,
-};
-static struct pm_qos_object network_throughput_pm_qos = {
-	.constraints = &network_tput_constraints,
-	.name = "network_throughput",
-};
-
-
-static BLOCKING_NOTIFIER_HEAD(memory_bandwidth_notifier);
-static struct pm_qos_constraints memory_bw_constraints = {
-	.list = PLIST_HEAD_INIT(memory_bw_constraints.list),
-	.target_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
-	.default_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
-	.no_constraint_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
-	.type = PM_QOS_SUM,
-	.notifiers = &memory_bandwidth_notifier,
-};
-static struct pm_qos_object memory_bandwidth_pm_qos = {
-	.constraints = &memory_bw_constraints,
-	.name = "memory_bandwidth",
-};
-
-
 static struct pm_qos_object *pm_qos_array[] = {
 	&null_pm_qos,
 	&cpu_dma_pm_qos,
-	&network_lat_pm_qos,
-	&network_throughput_pm_qos,
-	&memory_bandwidth_pm_qos,
 };
 
 static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,

diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index c874a70..f3b7239 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c

@@ -121,43 +121,25 @@ static void s2idle_loop(void)
 {
 	pm_pr_dbg("suspend-to-idle\n");
 
+	/*
+	 * Suspend-to-idle equals:
+	 * frozen processes + suspended devices + idle processors.
+	 * Thus s2idle_enter() should be called right after all devices have
+	 * been suspended.
+	 *
+	 * Wakeups during the noirq suspend of devices may be spurious, so try
+	 * to avoid them upfront.
+	 */
 	for (;;) {
-		int error;
-
-		dpm_noirq_begin();
-
-		/*
-		 * Suspend-to-idle equals
-		 * frozen processes + suspended devices + idle processors.
-		 * Thus s2idle_enter() should be called right after
-		 * all devices have been suspended.
-		 *
-		 * Wakeups during the noirq suspend of devices may be spurious,
-		 * so prevent them from terminating the loop right away.
-		 */
-		error = dpm_noirq_suspend_devices(PMSG_SUSPEND);
-		if (!error)
-			s2idle_enter();
-		else if (error == -EBUSY && pm_wakeup_pending())
-			error = 0;
-
-		if (!error && s2idle_ops && s2idle_ops->wake)
+		if (s2idle_ops && s2idle_ops->wake)
 			s2idle_ops->wake();
 
-		dpm_noirq_resume_devices(PMSG_RESUME);
-
-		dpm_noirq_end();
-
-		if (error)
-			break;
-
-		if (s2idle_ops && s2idle_ops->sync)
-			s2idle_ops->sync();
-
 		if (pm_wakeup_pending())
 			break;
 
 		pm_wakeup_clear(false);
+
+		s2idle_enter();
 	}
 
 	pm_pr_dbg("resume from suspend-to-idle\n");
@@ -271,14 +253,21 @@ static int platform_suspend_prepare_late(suspend_state_t state)
 
 static int platform_suspend_prepare_noirq(suspend_state_t state)
 {
-	return state != PM_SUSPEND_TO_IDLE && suspend_ops->prepare_late ?
-		suspend_ops->prepare_late() : 0;
+	if (state == PM_SUSPEND_TO_IDLE)
+		return s2idle_ops && s2idle_ops->prepare_late ?
+			s2idle_ops->prepare_late() : 0;
+
+	return suspend_ops->prepare_late ? suspend_ops->prepare_late() : 0;
 }
 
 static void platform_resume_noirq(suspend_state_t state)
 {
-	if (state != PM_SUSPEND_TO_IDLE && suspend_ops->wake)
+	if (state == PM_SUSPEND_TO_IDLE) {
+		if (s2idle_ops && s2idle_ops->restore_early)
+			s2idle_ops->restore_early();
+	} else if (suspend_ops->wake) {
 		suspend_ops->wake();
+	}
 }
 
 static void platform_resume_early(suspend_state_t state)
@@ -415,11 +404,6 @@ static int suspend_enter(suspend_state_t state, bool *wakeup)
 	if (error)
 		goto Devices_early_resume;
 
-	if (state == PM_SUSPEND_TO_IDLE && pm_test_level != TEST_PLATFORM) {
-		s2idle_loop();
-		goto Platform_early_resume;
-	}
-
 	error = dpm_suspend_noirq(PMSG_SUSPEND);
 	if (error) {
 		pr_err("noirq suspend of devices failed\n");
@@ -432,6 +416,11 @@ static int suspend_enter(suspend_state_t state, bool *wakeup)
 	if (suspend_test(TEST_PLATFORM))
 		goto Platform_wake;
 
+	if (state == PM_SUSPEND_TO_IDLE) {
+		s2idle_loop();
+		goto Platform_wake;
+	}
+
 	error = suspend_disable_secondary_cpus();
 	if (error || suspend_test(TEST_CPUS))
 		goto Enable_cpus;

diff --git a/kernel/power/wakelock.c b/kernel/power/wakelock.c
index 4210152..105df4d 100644
--- a/kernel/power/wakelock.c
+++ b/kernel/power/wakelock.c

@@ -27,7 +27,7 @@ static DEFINE_MUTEX(wakelocks_lock);
 struct wakelock {
 	char			*name;
 	struct rb_node		node;
-	struct wakeup_source	ws;
+	struct wakeup_source	*ws;
 #ifdef CONFIG_PM_WAKELOCKS_GC
 	struct list_head	lru;
 #endif
@@ -46,7 +46,7 @@ ssize_t pm_show_wakelocks(char *buf, bool show_active)
 
 	for (node = rb_first(&wakelocks_tree); node; node = rb_next(node)) {
 		wl = rb_entry(node, struct wakelock, node);
-		if (wl->ws.active == show_active)
+		if (wl->ws->active == show_active)
 			str += scnprintf(str, end - str, "%s ", wl->name);
 	}
 	if (str > buf)
@@ -112,16 +112,16 @@ static void __wakelocks_gc(struct work_struct *work)
 		u64 idle_time_ns;
 		bool active;
 
-		spin_lock_irq(&wl->ws.lock);
-		idle_time_ns = ktime_to_ns(ktime_sub(now, wl->ws.last_time));
-		active = wl->ws.active;
-		spin_unlock_irq(&wl->ws.lock);
+		spin_lock_irq(&wl->ws->lock);
+		idle_time_ns = ktime_to_ns(ktime_sub(now, wl->ws->last_time));
+		active = wl->ws->active;
+		spin_unlock_irq(&wl->ws->lock);
 
 		if (idle_time_ns < ((u64)WL_GC_TIME_SEC * NSEC_PER_SEC))
 			break;
 
 		if (!active) {
-			wakeup_source_remove(&wl->ws);
+			wakeup_source_unregister(wl->ws);
 			rb_erase(&wl->node, &wakelocks_tree);
 			list_del(&wl->lru);
 			kfree(wl->name);
@@ -187,9 +187,15 @@ static struct wakelock *wakelock_lookup_add(const char *name, size_t len,
 		kfree(wl);
 		return ERR_PTR(-ENOMEM);
 	}
-	wl->ws.name = wl->name;
-	wl->ws.last_time = ktime_get();
-	wakeup_source_add(&wl->ws);
+
+	wl->ws = wakeup_source_register(NULL, wl->name);
+	if (!wl->ws) {
+		kfree(wl->name);
+		kfree(wl);
+		return ERR_PTR(-ENOMEM);
+	}
+	wl->ws->last_time = ktime_get();
+
 	rb_link_node(&wl->node, parent, node);
 	rb_insert_color(&wl->node, &wakelocks_tree);
 	wakelocks_lru_add(wl);
@@ -233,9 +239,9 @@ int pm_wake_lock(const char *buf)
 		u64 timeout_ms = timeout_ns + NSEC_PER_MSEC - 1;
 
 		do_div(timeout_ms, NSEC_PER_MSEC);
-		__pm_wakeup_event(&wl->ws, timeout_ms);
+		__pm_wakeup_event(wl->ws, timeout_ms);
 	} else {
-		__pm_stay_awake(&wl->ws);
+		__pm_stay_awake(wl->ws);
 	}
 
 	wakelocks_lru_most_recent(wl);
@@ -271,7 +277,7 @@ int pm_wake_unlock(const char *buf)
 		ret = PTR_ERR(wl);
 		goto out;
 	}
-	__pm_relax(&wl->ws);
+	__pm_relax(wl->ws);
 
 	wakelocks_lru_most_recent(wl);
 	wakelocks_gc();

diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index 867b4bb..b03ca2f 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c

@@ -117,6 +117,7 @@ static void sugov_fast_switch(struct sugov_policy *sg_policy, u64 time,
 			      unsigned int next_freq)
 {
 	struct cpufreq_policy *policy = sg_policy->policy;
+	int cpu;
 
 	if (!sugov_update_next_freq(sg_policy, time, next_freq))
 		return;
@@ -126,7 +127,11 @@ static void sugov_fast_switch(struct sugov_policy *sg_policy, u64 time,
 		return;
 
 	policy->cur = next_freq;
-	trace_cpu_frequency(next_freq, smp_processor_id());
+
+	if (trace_cpu_frequency_enabled()) {
+		for_each_cpu(cpu, policy->cpus)
+			trace_cpu_frequency(next_freq, cpu);
+	}
 }
 
 static void sugov_deferred_update(struct sugov_policy *sg_policy, u64 time,

diff --git a/kernel/sched/idle.c b/kernel/sched/idle.c
index 8094093..b98283f 100644
--- a/kernel/sched/idle.c
+++ b/kernel/sched/idle.c

@@ -311,7 +311,7 @@ static enum hrtimer_restart idle_inject_timer_fn(struct hrtimer *timer)
 	return HRTIMER_NORESTART;
 }
 
-void play_idle(unsigned long duration_ms)
+void play_idle(unsigned long duration_us)
 {
 	struct idle_timer it;
 
@@ -323,7 +323,7 @@ void play_idle(unsigned long duration_ms)
 	WARN_ON_ONCE(current->nr_cpus_allowed != 1);
 	WARN_ON_ONCE(!(current->flags & PF_KTHREAD));
 	WARN_ON_ONCE(!(current->flags & PF_NO_SETAFFINITY));
-	WARN_ON_ONCE(!duration_ms);
+	WARN_ON_ONCE(!duration_us);
 
 	rcu_sleep_check();
 	preempt_disable();
@@ -333,7 +333,8 @@ void play_idle(unsigned long duration_ms)
 	it.done = 0;
 	hrtimer_init_on_stack(&it.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	it.timer.function = idle_inject_timer_fn;
-	hrtimer_start(&it.timer, ms_to_ktime(duration_ms), HRTIMER_MODE_REL_PINNED);
+	hrtimer_start(&it.timer, ns_to_ktime(duration_us * NSEC_PER_USEC),
+		      HRTIMER_MODE_REL_PINNED);
 
 	while (!READ_ONCE(it.done))
 		do_idle();

diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index 57518ef..93b382d 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c

@@ -97,7 +97,7 @@ static int alarmtimer_rtc_add_device(struct device *dev,
 	if (!device_may_wakeup(rtc->dev.parent))
 		return -1;
 
-	__ws = wakeup_source_register("alarmtimer");
+	__ws = wakeup_source_register(dev, "alarmtimer");
 
 	spin_lock_irqsave(&rtcdev_lock, flags);
 	if (!rtcdev) {

diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index 9063fca..c862249 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile

@@ -18,7 +18,6 @@
 $(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist))
 endif
 
-include ../../scripts/Makefile.arch
 
 # --- CONFIGURATION BEGIN ---
 
@@ -69,11 +68,6 @@
 sbindir ?=	/usr/sbin
 mandir ?=	/usr/man
 includedir ?=	/usr/include
-ifeq ($(IS_64_BIT), 1)
-libdir ?=	/usr/lib64
-else
-libdir ?=	/usr/lib
-endif
 localedir ?=	/usr/share/locale
 docdir ?=       /usr/share/doc/packages/cpupower
 confdir ?=      /etc/
@@ -100,6 +94,14 @@
 HOSTCC = gcc
 MKDIR = mkdir
 
+# 64bit library detection
+include ../../scripts/Makefile.arch
+
+ifeq ($(IS_64_BIT), 1)
+libdir ?=	/usr/lib64
+else
+libdir ?=	/usr/lib
+endif
 
 # Now we set up the build system
 #

diff --git a/tools/power/cpupower/bench/cpufreq-bench_plot.sh b/tools/power/cpupower/bench/cpufreq-bench_plot.sh
index 9061b4f..f5f8b3c 100644
--- a/tools/power/cpupower/bench/cpufreq-bench_plot.sh
+++ b/tools/power/cpupower/bench/cpufreq-bench_plot.sh

@@ -88,4 +88,4 @@
 echo >> $dir/plot_script.gpl
 
 gnuplot $dir/plot_script.gpl
-rm -r $dir
\ No newline at end of file
+rm -r $dir

diff --git a/tools/power/cpupower/bench/cpufreq-bench_script.sh b/tools/power/cpupower/bench/cpufreq-bench_script.sh
index 4e9714b..785a367 100644
--- a/tools/power/cpupower/bench/cpufreq-bench_script.sh
+++ b/tools/power/cpupower/bench/cpufreq-bench_script.sh

@@ -85,4 +85,4 @@
 }
 
 measure
-create_plots
\ No newline at end of file
+create_plots

diff --git a/tools/power/cpupower/po/de.po b/tools/power/cpupower/po/de.po
index 70887bb..9780a44 100644
--- a/tools/power/cpupower/po/de.po
+++ b/tools/power/cpupower/po/de.po

@@ -8,66 +8,66 @@
 "Project-Id-Version: cpufrequtils 006\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2011-03-08 17:03+0100\n"
-"PO-Revision-Date: 2009-08-08 17:18+0100\n"
-"Last-Translator:  <linux@dominikbrodowski.net>\n"
+"PO-Revision-Date: 2019-06-02 15:23+0200\n"
+"Last-Translator: Benjamin Weis <benjamin.weis@gmx.com>\n"
 "Language-Team: NONE\n"
 "Language: \n"
 "MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
 #: utils/idle_monitor/nhm_idle.c:36
 msgid "Processor Core C3"
-msgstr ""
+msgstr "Prozessorkern C3"
 
 #: utils/idle_monitor/nhm_idle.c:43
 msgid "Processor Core C6"
-msgstr ""
+msgstr "Prozessorkern C6"
 
 #: utils/idle_monitor/nhm_idle.c:51
 msgid "Processor Package C3"
-msgstr ""
+msgstr "Prozessorpaket C3"
 
 #: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
 msgid "Processor Package C6"
-msgstr ""
+msgstr "Prozessorpaket C6"
 
 #: utils/idle_monitor/snb_idle.c:33
 msgid "Processor Core C7"
-msgstr ""
+msgstr "Prozessorkern C7"
 
 #: utils/idle_monitor/snb_idle.c:40
 msgid "Processor Package C2"
-msgstr ""
+msgstr "Prozessorpaket C2"
 
 #: utils/idle_monitor/snb_idle.c:47
 msgid "Processor Package C7"
-msgstr ""
+msgstr "Prozessorpaket C7"
 
 #: utils/idle_monitor/amd_fam14h_idle.c:56
 msgid "Package in sleep state (PC1 or deeper)"
-msgstr ""
+msgstr "Paket in Schlafzustand (PC1 oder tiefer)"
 
 #: utils/idle_monitor/amd_fam14h_idle.c:63
 msgid "Processor Package C1"
-msgstr ""
+msgstr "Prozessorpaket C1"
 
 #: utils/idle_monitor/amd_fam14h_idle.c:77
 msgid "North Bridge P1 boolean counter (returns 0 or 1)"
-msgstr ""
+msgstr "North Bridge P1 boolescher Zähler (gibt 0 oder 1 zurück)"
 
 #: utils/idle_monitor/mperf_monitor.c:35
 msgid "Processor Core not idle"
-msgstr ""
+msgstr "Prozessorkern ist nicht im Leerlauf"
 
 #: utils/idle_monitor/mperf_monitor.c:42
 msgid "Processor Core in an idle state"
-msgstr ""
+msgstr "Prozessorkern ist in einem Ruhezustand"
 
 #: utils/idle_monitor/mperf_monitor.c:50
 msgid "Average Frequency (including boost) in MHz"
-msgstr ""
+msgstr "Durchschnittliche Frequenz (einschließlich Boost) in MHz"
 
 #: utils/idle_monitor/cpupower-monitor.c:66
 #, c-format
@@ -75,6 +75,8 @@
 "cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
 "interval_sec | -c command ...]\n"
 msgstr ""
+"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c Befehl ...]\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:69
 #, c-format
@@ -82,36 +84,40 @@
 "cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
 "interval_sec | -c command ...]\n"
 msgstr ""
+"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c Befehl ...]\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:71
 #, c-format
 msgid "\t -v: be more verbose\n"
-msgstr ""
+msgstr "\t -v: ausführlicher\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:73
 #, c-format
 msgid "\t -h: print this help\n"
-msgstr ""
+msgstr "\t -h: diese Hilfe ausgeben\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:74
 #, c-format
 msgid "\t -i: time interval to measure for in seconds (default 1)\n"
-msgstr ""
+msgstr "\t -i: Zeitintervall für die Messung in Sekunden (Standard 1)\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:75
 #, c-format
 msgid "\t -t: show CPU topology/hierarchy\n"
-msgstr ""
+msgstr "\t -t: CPU-Topologie/Hierarchie anzeigen\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:76
 #, c-format
 msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
 msgstr ""
+"\t -l: verfügbare CPU-Schlafwächter auflisten (für Verwendung mit -m)\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:77
 #, c-format
 msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
 msgstr ""
+"\t -m: spezifische CPU-Schlafwächter anzeigen (in gleicher Reihenfolge)\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:79
 #, c-format
@@ -119,71 +125,73 @@
 "only one of: -t, -l, -m are allowed\n"
 "If none of them is passed,"
 msgstr ""
+"nur einer von: -t, -l, -m ist erlaubt\n"
+"Wenn keiner von ihnen übergeben wird,"
 
 #: utils/idle_monitor/cpupower-monitor.c:80
 #, c-format
 msgid " all supported monitors are shown\n"
-msgstr ""
+msgstr " werden alle unterstützten Wächter angezeigt\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:197
 #, c-format
 msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
-msgstr ""
+msgstr "Wächter %s, Zähler %s hat keine Zählfunktion. Implementierungsfehler\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:207
 #, c-format
 msgid " *is offline\n"
-msgstr ""
+msgstr " *ist offline\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:236
 #, c-format
 msgid "%s: max monitor name length (%d) exceeded\n"
-msgstr ""
+msgstr "%s: max. Wächternamenslänge (%d) überschritten\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:250
 #, c-format
 msgid "No matching monitor found in %s, try -l option\n"
-msgstr ""
+msgstr "Kein passender Wächter in %s gefunden, versuchen Sie die Option -l\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:266
 #, c-format
 msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
-msgstr ""
+msgstr "Wächter \"%s\" (%d Zustände) - Könnte nach %u s überlaufen\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:319
 #, c-format
 msgid "%s took %.5f seconds and exited with status %d\n"
-msgstr ""
+msgstr "%s hat %.5f Sekunden gedauert und hat sich mit Status %d beendet\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:406
 #, c-format
 msgid "Cannot read number of available processors\n"
-msgstr ""
+msgstr "Anzahl der verfügbaren Prozessoren kann nicht gelesen werden\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:417
 #, c-format
 msgid "Available monitor %s needs root access\n"
-msgstr ""
+msgstr "Verfügbarer Wächter %s benötigt root-Zugriff\n"
 
 #: utils/idle_monitor/cpupower-monitor.c:428
 #, c-format
 msgid "No HW Cstate monitors found\n"
-msgstr ""
+msgstr "Keine HW C-Zustandswächter gefunden\n"
 
 #: utils/cpupower.c:78
 #, c-format
 msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
-msgstr ""
+msgstr "cpupower [ -c cpulist ] Unterbefehl [ARGS]\n"
 
 #: utils/cpupower.c:79
 #, c-format
 msgid "cpupower --version\n"
-msgstr ""
+msgstr "cpupower --version\n"
 
 #: utils/cpupower.c:80
 #, c-format
 msgid "Supported subcommands are:\n"
-msgstr ""
+msgstr "Unterstützte Unterbefehle sind:\n"
 
 #: utils/cpupower.c:83
 #, c-format
@@ -191,11 +199,15 @@
 "\n"
 "Some subcommands can make use of the -c cpulist option.\n"
 msgstr ""
+"\n"
+"Einige Unterbefehle können die Option -c cpulist verwenden.\n"
 
 #: utils/cpupower.c:84
 #, c-format
 msgid "Look at the general cpupower manpage how to use it\n"
 msgstr ""
+"Schauen Sie sich die allgemeine cpupower manpage an, um zu erfahren, wie man "
+"es benutzt\n"
 
 #: utils/cpupower.c:85
 #, c-format
@@ -217,30 +229,31 @@
 #: utils/cpupower.c:114
 #, c-format
 msgid "Error parsing cpu list\n"
-msgstr ""
+msgstr "Fehler beim Parsen der CPU-Liste\n"
 
 #: utils/cpupower.c:172
 #, c-format
 msgid "Subcommand %s needs root privileges\n"
-msgstr ""
+msgstr "Unterbefehl %s benötigt root-Rechte\n"
 
 #: utils/cpufreq-info.c:31
 #, c-format
 msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
 msgstr ""
-"Konnte nicht die Anzahl der CPUs herausfinden (%s : %s), nehme daher 1 an.\n"
+"Anzahl der CPUs konnte nicht herausgefinden werden (%s: %s), es wird daher 1 "
+"angenommen\n"
 
 #: utils/cpufreq-info.c:63
 #, c-format
 msgid ""
 "          minimum CPU frequency  -  maximum CPU frequency  -  governor\n"
-msgstr ""
-"          minimale CPU-Taktfreq. -  maximale CPU-Taktfreq. -  Regler  \n"
+msgstr "          minimale CPU-Frequenz  -  maximale CPU-Frequenz  -  Regler\n"
 
 #: utils/cpufreq-info.c:151
 #, c-format
 msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
 msgstr ""
+"Fehler beim Evaluieren der Boost-Fähigkeiten bei CPU %d -- sind Sie root?\n"
 
 #. P state changes via MSR are identified via cpuid 80000007
 #. on Intel and AMD, but we assume boost capable machines can do that
@@ -250,50 +263,50 @@
 #: utils/cpufreq-info.c:161
 #, c-format
 msgid "  boost state support: \n"
-msgstr ""
+msgstr "  Boost-Zustand-Unterstützung: \n"
 
 #: utils/cpufreq-info.c:163
 #, c-format
 msgid "    Supported: %s\n"
-msgstr ""
+msgstr "    Unterstützt: %s\n"
 
 #: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
 msgid "yes"
-msgstr ""
+msgstr "ja"
 
 #: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
 msgid "no"
-msgstr ""
+msgstr "nein"
 
 #: utils/cpufreq-info.c:164
-#, fuzzy, c-format
+#, c-format
 msgid "    Active: %s\n"
-msgstr "  Treiber: %s\n"
+msgstr "    Aktiv: %s\n"
 
 #: utils/cpufreq-info.c:177
 #, c-format
 msgid "    Boost States: %d\n"
-msgstr ""
+msgstr "    Boost-Zustände: %d\n"
 
 #: utils/cpufreq-info.c:178
 #, c-format
 msgid "    Total States: %d\n"
-msgstr ""
+msgstr "    Gesamtzustände: %d\n"
 
 #: utils/cpufreq-info.c:181
 #, c-format
 msgid "    Pstate-Pb%d: %luMHz (boost state)\n"
-msgstr ""
+msgstr "    Pstate-Pb%d: %luMHz (Boost-Zustand)\n"
 
 #: utils/cpufreq-info.c:184
 #, c-format
 msgid "    Pstate-P%d:  %luMHz\n"
-msgstr ""
+msgstr "    Pstate-P%d:  %luMHz\n"
 
 #: utils/cpufreq-info.c:211
 #, c-format
 msgid "  no or unknown cpufreq driver is active on this CPU\n"
-msgstr "  kein oder nicht bestimmbarer cpufreq-Treiber aktiv\n"
+msgstr "  kein oder ein unbekannter cpufreq-Treiber ist auf dieser CPU aktiv\n"
 
 #: utils/cpufreq-info.c:213
 #, c-format
@@ -303,12 +316,12 @@
 #: utils/cpufreq-info.c:219
 #, c-format
 msgid "  CPUs which run at the same hardware frequency: "
-msgstr "  Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: "
+msgstr "  CPUs, die mit der gleichen Hardwarefrequenz laufen: "
 
 #: utils/cpufreq-info.c:230
 #, c-format
 msgid "  CPUs which need to have their frequency coordinated by software: "
-msgstr "  Die Taktfrequenz folgender CPUs werden per Software koordiniert: "
+msgstr "  CPUs, die ihre Frequenz mit Software koordinieren müssen: "
 
 #: utils/cpufreq-info.c:241
 #, c-format
@@ -318,22 +331,22 @@
 #: utils/cpufreq-info.c:247
 #, c-format
 msgid "  hardware limits: "
-msgstr "  Hardwarebedingte Grenzen der Taktfrequenz: "
+msgstr "  Hardwarebegrenzungen: "
 
 #: utils/cpufreq-info.c:256
 #, c-format
 msgid "  available frequency steps: "
-msgstr "  mögliche Taktfrequenzen: "
+msgstr "  verfügbare Frequenzschritte: "
 
 #: utils/cpufreq-info.c:269
 #, c-format
 msgid "  available cpufreq governors: "
-msgstr "  mögliche Regler: "
+msgstr "  verfügbare cpufreq-Regler: "
 
 #: utils/cpufreq-info.c:280
 #, c-format
 msgid "  current policy: frequency should be within "
-msgstr "  momentane Taktik: die Frequenz soll innerhalb "
+msgstr "  momentane Richtlinie: Frequenz sollte innerhalb "
 
 #: utils/cpufreq-info.c:282
 #, c-format
@@ -346,29 +359,28 @@
 "The governor \"%s\" may decide which speed to use\n"
 "                  within this range.\n"
 msgstr ""
-"  liegen. Der Regler \"%s\" kann frei entscheiden,\n"
-"                    welche Taktfrequenz innerhalb dieser Grenze verwendet "
-"wird.\n"
+"  sein. Der Regler \"%s\" kann frei entscheiden,\n"
+"                    welche Geschwindigkeit er in diesem Bereich verwendet.\n"
 
 #: utils/cpufreq-info.c:293
 #, c-format
 msgid "  current CPU frequency is "
-msgstr "  momentane Taktfrequenz ist "
+msgstr "  momentane CPU-Frequenz ist "
 
 #: utils/cpufreq-info.c:296
 #, c-format
 msgid " (asserted by call to hardware)"
-msgstr "  (verifiziert durch Nachfrage bei der Hardware)"
+msgstr " (durch Aufruf der Hardware sichergestellt)"
 
 #: utils/cpufreq-info.c:304
 #, c-format
 msgid "  cpufreq stats: "
-msgstr "  Statistik:"
+msgstr "  cpufreq-Statistiken: "
 
 #: utils/cpufreq-info.c:472
-#, fuzzy, c-format
+#, c-format
 msgid "Usage: cpupower freqinfo [options]\n"
-msgstr "Aufruf: cpufreq-info [Optionen]\n"
+msgstr "Aufruf: cpupower freqinfo [Optionen]\n"
 
 #: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
 #: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
@@ -377,11 +389,9 @@
 msgstr "Optionen:\n"
 
 #: utils/cpufreq-info.c:474
-#, fuzzy, c-format
+#, c-format
 msgid "  -e, --debug          Prints out debug information [default]\n"
-msgstr ""
-"  -e, --debug          Erzeugt detaillierte Informationen, hilfreich\n"
-"                       zum Aufspüren von Fehlern\n"
+msgstr "  -e, --debug          Gibt Debug-Informationen aus [Standard]\n"
 
 #: utils/cpufreq-info.c:475
 #, c-format
@@ -424,7 +434,7 @@
 #: utils/cpufreq-info.c:482
 #, c-format
 msgid "  -g, --governors      Determines available cpufreq governors *\n"
-msgstr "  -g, --governors      Erzeugt eine Liste mit verfügbaren Reglern *\n"
+msgstr "  -g, --governors      Ermittelt verfügbare cpufreq-Regler *\n"
 
 #: utils/cpufreq-info.c:483
 #, c-format
@@ -449,8 +459,7 @@
 #: utils/cpufreq-info.c:486
 #, c-format
 msgid "  -s, --stats          Shows cpufreq statistics if available\n"
-msgstr ""
-"  -s, --stats          Zeigt, sofern möglich, Statistiken über cpufreq an.\n"
+msgstr "  -s, --stats          Zeigt cpufreq-Statistiken an, falls vorhanden\n"
 
 #: utils/cpufreq-info.c:487
 #, c-format
@@ -464,13 +473,13 @@
 #: utils/cpufreq-info.c:488
 #, c-format
 msgid "  -b, --boost          Checks for turbo or boost modes  *\n"
-msgstr ""
+msgstr "  -b, --boost          Prüft auf Turbo- oder Boost-Modi  *\n"
 
 #: utils/cpufreq-info.c:489
 #, c-format
 msgid ""
-"  -o, --proc           Prints out information like provided by the /proc/"
-"cpufreq\n"
+"  -o, --proc           Prints out information like provided by the "
+"/proc/cpufreq\n"
 "                       interface in 2.4. and early 2.6. kernels\n"
 msgstr ""
 "  -o, --proc           Erzeugt Informationen in einem ähnlichem Format zu "
@@ -509,8 +518,8 @@
 "For the arguments marked with *, omitting the -c or --cpu argument is\n"
 "equivalent to setting it to zero\n"
 msgstr ""
-"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n"
-"mittels -c oder --cpu etwas anderes angegeben wird\n"
+"Für die mit * markierten Argumente ist das Weglassen des Arguments\n"
+"-c oder --cpu gleichbedeutend mit der Einstellung auf Null\n"
 
 #: utils/cpufreq-info.c:580
 #, c-format
@@ -525,8 +534,8 @@
 "You can't specify more than one --cpu parameter and/or\n"
 "more than one output-specific argument\n"
 msgstr ""
-"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n"
-"informationsspezifischen Parameter gleichzeitig angeben\n"
+"Sie können nicht mehr als einen Parameter --cpu und/oder\n"
+"mehr als ein ausgabespezifisches Argument angeben\n"
 
 #: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
 #: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
@@ -538,17 +547,17 @@
 #, c-format
 msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
 msgstr ""
-"Konnte nicht die CPU %d analysieren, da sie (scheinbar?) nicht existiert.\n"
+"CPU %d konnte nicht analysiert werden, da sie scheinbar nicht existiert\n"
 
 #: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
 #, c-format
 msgid "analyzing CPU %d:\n"
-msgstr "analysiere CPU %d:\n"
+msgstr "CPU %d wird analysiert:\n"
 
 #: utils/cpufreq-set.c:25
-#, fuzzy, c-format
+#, c-format
 msgid "Usage: cpupower frequency-set [options]\n"
-msgstr "Aufruf: cpufreq-set [Optionen]\n"
+msgstr "Aufruf: cpupower frequency-set [Optionen]\n"
 
 #: utils/cpufreq-set.c:27
 #, c-format
@@ -556,7 +565,7 @@
 "  -d FREQ, --min FREQ      new minimum CPU frequency the governor may "
 "select\n"
 msgstr ""
-"  -d FREQ, --min FREQ      neue minimale Taktfrequenz, die der Regler\n"
+"  -d FREQ, --min FREQ      neue minimale CPU-Frequenz, die der Regler\n"
 "                           auswählen darf\n"
 
 #: utils/cpufreq-set.c:28
@@ -571,7 +580,7 @@
 #: utils/cpufreq-set.c:29
 #, c-format
 msgid "  -g GOV, --governor GOV   new cpufreq governor\n"
-msgstr "  -g GOV, --governors GOV  wechsle zu Regler GOV\n"
+msgstr "  -g GOV, --governors GOV   neuer cpufreq-Regler\n"
 
 #: utils/cpufreq-set.c:30
 #, c-format
@@ -579,29 +588,29 @@
 "  -f FREQ, --freq FREQ     specific frequency to be set. Requires userspace\n"
 "                           governor to be available and loaded\n"
 msgstr ""
-"  -f FREQ, --freq FREQ     setze exakte Taktfrequenz. Benötigt den Regler\n"
-"                           'userspace'.\n"
+"  -f FREQ, --freq FREQ     bestimmte Frequenz, die eingestellt werden soll.\n"
+"                           Erfordert einen verfügbaren und geladenen "
+"userspace-Regler\n"
 
 #: utils/cpufreq-set.c:32
 #, c-format
 msgid "  -r, --related            Switches all hardware-related CPUs\n"
-msgstr ""
-"  -r, --related            Setze Werte für alle CPUs, deren Taktfrequenz\n"
-"                           hardwarebedingt identisch ist.\n"
+msgstr "  -r, --related            Schaltet alle hardwarebezogenen CPUs um\n"
 
 #: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
 #, c-format
 msgid "  -h, --help               Prints out this screen\n"
-msgstr "  -h, --help               Gibt diese Kurzübersicht aus\n"
+msgstr "  -h, --help               Gibt diesen Bildschirm aus\n"
 
 #: utils/cpufreq-set.c:35
-#, fuzzy, c-format
+#, c-format
 msgid ""
 "Notes:\n"
 "1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
 msgstr ""
-"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n"
-"mittels -c oder --cpu etwas anderes angegeben wird\n"
+"Hinweis:\n"
+"1. Das Weglassen des Arguments -c oder --cpu ist gleichbedeutend mit der "
+"Einstellung auf \"all\"\n"
 
 #: utils/cpufreq-set.c:37
 #, fuzzy, c-format
@@ -636,17 +645,21 @@
 "frequency\n"
 "   or because the userspace governor isn't loaded?\n"
 msgstr ""
-"Beim Einstellen ist ein Fehler aufgetreten. Typische Fehlerquellen sind:\n"
-"- nicht ausreichende Rechte (Administrator)\n"
-"- der Regler ist nicht verfügbar bzw. nicht geladen\n"
-"- die angegebene Taktik ist inkorrekt\n"
-"- eine spezifische Frequenz wurde angegeben, aber der Regler 'userspace'\n"
-"  kann entweder hardwarebedingt nicht genutzt werden oder ist nicht geladen\n"
+"Fehler beim Festlegen neuer Werte. Häufige Fehler:\n"
+"- Verfügen Sie über die erforderlichen Administrationsrechte? (Superuser?)\n"
+"- Ist der von Ihnen gewünschte Regler verfügbar und mittels modprobe "
+"geladen?\n"
+"- Versuchen Sie eine ungültige Richtlinie festzulegen?\n"
+"- Versuchen Sie eine bestimmte Frequenz festzulegen, aber der "
+"userspace-Regler ist nicht verfügbar,\n"
+"   z.B. wegen Hardware, die nicht auf eine bestimmte Frequenz eingestellt "
+"werden kann\n"
+"   oder weil der userspace-Regler nicht geladen ist?\n"
 
 #: utils/cpufreq-set.c:170
 #, c-format
 msgid "wrong, unknown or unhandled CPU?\n"
-msgstr "unbekannte oder nicht regelbare CPU\n"
+msgstr "falsche, unbekannte oder nicht regelbare CPU?\n"
 
 #: utils/cpufreq-set.c:302
 #, c-format
@@ -654,8 +667,8 @@
 "the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
 "-g/--governor parameters\n"
 msgstr ""
-"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, -u/--"
-"max\n"
+"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, "
+"-u/--max\n"
 "oder -g/--governor kombiniert werden\n"
 
 #: utils/cpufreq-set.c:308
@@ -664,18 +677,18 @@
 "At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
 "-g/--governor must be passed\n"
 msgstr ""
-"Es muss mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max oder\n"
-"-g/--governor angegeben werden.\n"
+"Mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max und\n"
+"-g/--governor muss übergeben werden\n"
 
 #: utils/cpufreq-set.c:347
 #, c-format
 msgid "Setting cpu: %d\n"
-msgstr ""
+msgstr "CPU einstellen: %d\n"
 
 #: utils/cpupower-set.c:22
 #, c-format
 msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
-msgstr ""
+msgstr "Aufruf: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
 
 #: utils/cpupower-set.c:24
 #, c-format
@@ -689,6 +702,8 @@
 msgid ""
 "  -m, --sched-mc  [VAL]    Sets the kernel's multi core scheduler policy.\n"
 msgstr ""
+"  -m, --sched-mc  [VAL]    Legt die Mehrkern-Scheduler-Richtlinie des "
+"Kernels fest.\n"
 
 #: utils/cpupower-set.c:27
 #, c-format
@@ -700,37 +715,37 @@
 #: utils/cpupower-set.c:80
 #, c-format
 msgid "--perf-bias param out of range [0-%d]\n"
-msgstr ""
+msgstr "--perf-bias-Parameter außerhalb des Bereichs [0-%d]\n"
 
 #: utils/cpupower-set.c:91
 #, c-format
 msgid "--sched-mc param out of range [0-%d]\n"
-msgstr ""
+msgstr "Parameter --sched-mc außerhalb des Bereichs [0-%d]\n"
 
 #: utils/cpupower-set.c:102
 #, c-format
 msgid "--sched-smt param out of range [0-%d]\n"
-msgstr ""
+msgstr "Parameter --sched-smt außerhalb des Bereichs [0-%d]\n"
 
 #: utils/cpupower-set.c:121
 #, c-format
 msgid "Error setting sched-mc %s\n"
-msgstr ""
+msgstr "Fehler beim Einstellen von sched-mc %s\n"
 
 #: utils/cpupower-set.c:127
 #, c-format
 msgid "Error setting sched-smt %s\n"
-msgstr ""
+msgstr "Fehler beim Einstellen von sched-smt %s\n"
 
 #: utils/cpupower-set.c:146
 #, c-format
 msgid "Error setting perf-bias value on CPU %d\n"
-msgstr ""
+msgstr "Fehler beim Einstellen des perf-bias-Wertes auf der CPU %d\n"
 
 #: utils/cpupower-info.c:21
 #, c-format
 msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
-msgstr ""
+msgstr "Aufruf: cpupower info [ -b ] [ -m ] [ -s ]\n"
 
 #: utils/cpupower-info.c:23
 #, c-format
@@ -740,9 +755,10 @@
 msgstr ""
 
 #: utils/cpupower-info.c:25
-#, fuzzy, c-format
+#, c-format
 msgid "  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"
-msgstr "  -p, --policy         Findet die momentane Taktik heraus *\n"
+msgstr ""
+"  -m, --sched-mc     Ruft die Mehrkern-Scheduler-Richtlinie des Kernels ab.\n"
 
 #: utils/cpupower-info.c:26
 #, c-format
@@ -756,17 +772,20 @@
 "\n"
 "Passing no option will show all info, by default only on core 0\n"
 msgstr ""
+"\n"
+"Wenn Sie keine Option übergeben, werden alle Informationen angezeigt, "
+"standardmäßig nur auf Kern 0\n"
 
 #: utils/cpupower-info.c:102
 #, c-format
 msgid "System's multi core scheduler setting: "
-msgstr ""
+msgstr "Mehrkern-Scheduler-Einstellung des Systems: "
 
 #. if sysfs file is missing it's: errno == ENOENT
 #: utils/cpupower-info.c:105 utils/cpupower-info.c:114
 #, c-format
 msgid "not supported\n"
-msgstr ""
+msgstr "nicht unterstützt\n"
 
 #: utils/cpupower-info.c:111
 #, c-format
@@ -786,164 +805,161 @@
 #: utils/cpupower-info.c:147
 #, c-format
 msgid "Could not read perf-bias value\n"
-msgstr ""
+msgstr "perf-bias-Wert konnte nicht gelesen werden\n"
 
 #: utils/cpupower-info.c:150
 #, c-format
 msgid "perf-bias: %d\n"
-msgstr ""
+msgstr "perf-bias: %d\n"
 
 #: utils/cpuidle-info.c:28
-#, fuzzy, c-format
+#, c-format
 msgid "Analyzing CPU %d:\n"
-msgstr "analysiere CPU %d:\n"
+msgstr "CPU %d wird analysiert:\n"
 
 #: utils/cpuidle-info.c:32
 #, c-format
 msgid "CPU %u: No idle states\n"
-msgstr ""
+msgstr "CPU %u: Keine Ruhezustände\n"
 
 #: utils/cpuidle-info.c:36
 #, c-format
 msgid "CPU %u: Can't read idle state info\n"
-msgstr ""
+msgstr "CPU %u: Ruhezustands-Informationen können nicht gelesen werden\n"
 
 #: utils/cpuidle-info.c:41
 #, c-format
 msgid "Could not determine max idle state %u\n"
-msgstr ""
+msgstr "Max. Ruhezustand %u konnte nicht bestimmt werden\n"
 
 #: utils/cpuidle-info.c:46
 #, c-format
 msgid "Number of idle states: %d\n"
-msgstr ""
+msgstr "Anzahl der Ruhezustände: %d\n"
 
 #: utils/cpuidle-info.c:48
-#, fuzzy, c-format
+#, c-format
 msgid "Available idle states:"
-msgstr "  mögliche Taktfrequenzen: "
+msgstr "Verfügbare Ruhezustände:"
 
 #: utils/cpuidle-info.c:71
 #, c-format
 msgid "Flags/Description: %s\n"
-msgstr ""
+msgstr "Merker/Beschreibung: %s\n"
 
 #: utils/cpuidle-info.c:74
 #, c-format
 msgid "Latency: %lu\n"
-msgstr ""
+msgstr "Latenz: %lu\n"
 
 #: utils/cpuidle-info.c:76
 #, c-format
 msgid "Usage: %lu\n"
-msgstr ""
+msgstr "Aufruf: %lu\n"
 
 #: utils/cpuidle-info.c:78
 #, c-format
 msgid "Duration: %llu\n"
-msgstr ""
+msgstr "Dauer: %llu\n"
 
 #: utils/cpuidle-info.c:90
 #, c-format
 msgid "Could not determine cpuidle driver\n"
-msgstr ""
+msgstr "cpuidle-Treiber konnte nicht bestimmt werden\n"
 
 #: utils/cpuidle-info.c:94
-#, fuzzy, c-format
+#, c-format
 msgid "CPUidle driver: %s\n"
-msgstr "  Treiber: %s\n"
+msgstr "CPUidle-Treiber: %s\n"
 
 #: utils/cpuidle-info.c:99
 #, c-format
 msgid "Could not determine cpuidle governor\n"
-msgstr ""
+msgstr "cpuidle-Regler konnte nicht bestimmt werden\n"
 
 #: utils/cpuidle-info.c:103
 #, c-format
 msgid "CPUidle governor: %s\n"
-msgstr ""
+msgstr "CPUidle-Regler: %s\n"
 
 #: utils/cpuidle-info.c:122
 #, c-format
 msgid "CPU %u: Can't read C-state info\n"
-msgstr ""
+msgstr "CPU %u: C-Zustands-Informationen können nicht gelesen werden\n"
 
 #. printf("Cstates: %d\n", cstates);
 #: utils/cpuidle-info.c:127
 #, c-format
 msgid "active state:            C0\n"
-msgstr ""
+msgstr "aktiver Zustand:            C0\n"
 
 #: utils/cpuidle-info.c:128
 #, c-format
 msgid "max_cstate:              C%u\n"
-msgstr ""
+msgstr "max_cstate:              C%u\n"
 
 #: utils/cpuidle-info.c:129
-#, fuzzy, c-format
+#, c-format
 msgid "maximum allowed latency: %lu usec\n"
-msgstr "  Maximale Dauer eines Taktfrequenzwechsels: "
+msgstr "maximal erlaubte Latenz: %lu usec\n"
 
 #: utils/cpuidle-info.c:130
 #, c-format
 msgid "states:\t\n"
-msgstr ""
+msgstr "Zustände:\t\n"
 
 #: utils/cpuidle-info.c:132
 #, c-format
 msgid "    C%d:                  type[C%d] "
-msgstr ""
+msgstr "    C%d:                  Typ[C%d] "
 
 #: utils/cpuidle-info.c:134
 #, c-format
 msgid "promotion[--] demotion[--] "
-msgstr ""
+msgstr "promotion[--] demotion[--] "
 
 #: utils/cpuidle-info.c:135
 #, c-format
 msgid "latency[%03lu] "
-msgstr ""
+msgstr "Latenz[%03lu] "
 
 #: utils/cpuidle-info.c:137
 #, c-format
 msgid "usage[%08lu] "
-msgstr ""
+msgstr "Aufruf[%08lu] "
 
 #: utils/cpuidle-info.c:139
 #, c-format
 msgid "duration[%020Lu] \n"
-msgstr ""
+msgstr "Dauer[%020Lu] \n"
 
 #: utils/cpuidle-info.c:147
-#, fuzzy, c-format
+#, c-format
 msgid "Usage: cpupower idleinfo [options]\n"
-msgstr "Aufruf: cpufreq-info [Optionen]\n"
+msgstr "Aufruf: cpupower idleinfo [Optionen]\n"
 
 #: utils/cpuidle-info.c:149
-#, fuzzy, c-format
+#, c-format
 msgid "  -s, --silent         Only show general C-state information\n"
 msgstr ""
-"  -e, --debug          Erzeugt detaillierte Informationen, hilfreich\n"
-"                       zum Aufspüren von Fehlern\n"
+"  -s, --silent         Nur allgemeine C-Zustands-Informationen anzeigen\n"
 
 #: utils/cpuidle-info.c:150
-#, fuzzy, c-format
+#, c-format
 msgid ""
-"  -o, --proc           Prints out information like provided by the /proc/"
-"acpi/processor/*/power\n"
+"  -o, --proc           Prints out information like provided by the "
+"/proc/acpi/processor/*/power\n"
 "                       interface in older kernels\n"
 msgstr ""
-"  -o, --proc           Erzeugt Informationen in einem ähnlichem Format zu "
-"dem\n"
-"                       der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n"
-"                       Kernel-Versionen\n"
+"  -o, --proc           Gibt Informationen so aus, wie sie von der "
+"Schnittstelle\n"
+"                       /proc/acpi/processor/*/power in älteren Kerneln "
+"bereitgestellt werden\n"
 
 #: utils/cpuidle-info.c:209
-#, fuzzy, c-format
+#, c-format
 msgid "You can't specify more than one output-specific argument\n"
-msgstr ""
-"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n"
-"informationsspezifischen Parameter gleichzeitig angeben\n"
+msgstr "Sie können nicht mehr als ein ausgabenspezifisches Argument angeben\n"
 
 #~ msgid ""
 #~ "  -c CPU, --cpu CPU    CPU number which information shall be determined "
@@ -956,6 +972,6 @@
 #~ "  -c CPU, --cpu CPU        number of CPU where cpufreq settings shall be "
 #~ "modified\n"
 #~ msgstr ""
-#~ "  -c CPU, --cpu CPU        Nummer der CPU, deren Taktfrequenz-"
-#~ "Einstellung\n"
+#~ "  -c CPU, --cpu CPU        Nummer der CPU, deren "
+#~ "Taktfrequenz-Einstellung\n"
 #~ "                           werden soll\n"

diff --git a/tools/power/pm-graph/README b/tools/power/pm-graph/README
index 58a5591..96259f6 100644
--- a/tools/power/pm-graph/README
+++ b/tools/power/pm-graph/README

@@ -1,7 +1,7 @@
                      p m - g r a p h
 
    pm-graph: suspend/resume/boot timing analysis tools
-    Version: 5.4
+    Version: 5.5
      Author: Todd Brandt <todd.e.brandt@intel.com>
   Home Page: https://01.org/pm-graph
 
@@ -18,6 +18,10 @@
 	- upstream version in git:
 	  https://github.com/intel/pm-graph/
 
+ Requirements:
+	- runs with python2 or python3, choice is made by /usr/bin/python link
+	- python2 now requires python-configparser be installed
+
  Table of Contents
 	- Overview
 	- Setup

diff --git a/tools/power/pm-graph/bootgraph.py b/tools/power/pm-graph/bootgraph.py
index 666bcbd..d3b99a1 100755
--- a/tools/power/pm-graph/bootgraph.py
+++ b/tools/power/pm-graph/bootgraph.py

@@ -1,9 +1,18 @@
-#!/usr/bin/python2
+#!/usr/bin/python
 # SPDX-License-Identifier: GPL-2.0-only
 #
 # Tool for analyzing boot timing
 # Copyright (c) 2013, Intel Corporation.
 #
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
 # Authors:
 #	 Todd Brandt <todd.e.brandt@linux.intel.com>
 #
@@ -81,7 +90,7 @@
 		cmdline = 'initcall_debug log_buf_len=32M'
 		if self.useftrace:
 			if self.cpucount > 0:
-				bs = min(self.memtotal / 2, 2*1024*1024) / self.cpucount
+				bs = min(self.memtotal // 2, 2*1024*1024) // self.cpucount
 			else:
 				bs = 131072
 			cmdline += ' trace_buf_size=%dK trace_clock=global '\
@@ -137,13 +146,13 @@
 			if arg in ['-h', '-v', '-cronjob', '-reboot', '-verbose']:
 				continue
 			elif arg in ['-o', '-dmesg', '-ftrace', '-func']:
-				args.next()
+				next(args)
 				continue
 			elif arg == '-result':
-				cmdline += ' %s "%s"' % (arg, os.path.abspath(args.next()))
+				cmdline += ' %s "%s"' % (arg, os.path.abspath(next(args)))
 				continue
 			elif arg == '-cgskip':
-				file = self.configFile(args.next())
+				file = self.configFile(next(args))
 				cmdline += ' %s "%s"' % (arg, os.path.abspath(file))
 				continue
 			cmdline += ' '+arg
@@ -292,11 +301,11 @@
 	tp = aslib.TestProps()
 	devtemp = dict()
 	if(sysvals.dmesgfile):
-		lf = open(sysvals.dmesgfile, 'r')
+		lf = open(sysvals.dmesgfile, 'rb')
 	else:
 		lf = Popen('dmesg', stdout=PIPE).stdout
 	for line in lf:
-		line = line.replace('\r\n', '')
+		line = aslib.ascii(line).replace('\r\n', '')
 		# grab the stamp and sysinfo
 		if re.match(tp.stampfmt, line):
 			tp.stamp = line
@@ -649,7 +658,7 @@
 		statinfo += '\t"%s": [\n\t\t"%s",\n' % (n, devstats[n]['info'])
 		if 'fstat' in devstats[n]:
 			funcs = devstats[n]['fstat']
-			for f in sorted(funcs, key=funcs.get, reverse=True):
+			for f in sorted(funcs, key=lambda k:(funcs[k], k), reverse=True):
 				if funcs[f][0] < 0.01 and len(funcs) > 10:
 					break
 				statinfo += '\t\t"%f|%s|%d",\n' % (funcs[f][0], f, funcs[f][1])
@@ -729,7 +738,7 @@
 		op.write('@reboot python %s\n' % sysvals.cronjobCmdString())
 		op.close()
 		res = call([cmd, cronfile])
-	except Exception, e:
+	except Exception as e:
 		pprint('Exception: %s' % str(e))
 		shutil.move(backfile, cronfile)
 		res = -1
@@ -745,7 +754,7 @@
 		try:
 			call(sysvals.blexec, stderr=PIPE, stdout=PIPE,
 				env={'PATH': '.:/sbin:/usr/sbin:/usr/bin:/sbin:/bin'})
-		except Exception, e:
+		except Exception as e:
 			pprint('Exception: %s\n' % str(e))
 		return
 	# extract the option and create a grub config without it
@@ -792,7 +801,7 @@
 		op.close()
 		res = call(sysvals.blexec)
 		os.remove(grubfile)
-	except Exception, e:
+	except Exception as e:
 		pprint('Exception: %s' % str(e))
 		res = -1
 	# cleanup
@@ -866,6 +875,7 @@
 	'Other commands:\n'\
 	'  -flistall     Print all functions capable of being captured in ftrace\n'\
 	'  -sysinfo      Print out system info extracted from BIOS\n'\
+	'  -which exec   Print an executable path, should function even without PATH\n'\
 	' [redo]\n'\
 	'  -dmesg file   Create HTML output using dmesg input (used with -ftrace)\n'\
 	'  -ftrace file  Create HTML output using ftrace input (used with -dmesg)\n'\
@@ -907,13 +917,13 @@
 			sysvals.mincglen = aslib.getArgFloat('-mincg', args, 0.0, 10000.0)
 		elif(arg == '-cgfilter'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No callgraph functions supplied', True)
 			sysvals.setCallgraphFilter(val)
 		elif(arg == '-cgskip'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No file supplied', True)
 			if val.lower() in switchoff:
@@ -924,7 +934,7 @@
 					doError('%s does not exist' % cgskip)
 		elif(arg == '-bl'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No boot loader name supplied', True)
 			if val.lower() not in ['grub']:
@@ -937,7 +947,7 @@
 			sysvals.max_graph_depth = aslib.getArgInt('-maxdepth', args, 0, 1000)
 		elif(arg == '-func'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No filter functions supplied', True)
 			sysvals.useftrace = True
@@ -946,7 +956,7 @@
 			sysvals.setGraphFilter(val)
 		elif(arg == '-ftrace'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No ftrace file supplied', True)
 			if(os.path.exists(val) == False):
@@ -959,7 +969,7 @@
 			sysvals.cgexp = True
 		elif(arg == '-dmesg'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No dmesg file supplied', True)
 			if(os.path.exists(val) == False):
@@ -968,13 +978,13 @@
 			sysvals.dmesgfile = val
 		elif(arg == '-o'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No subdirectory name supplied', True)
 			sysvals.testdir = sysvals.setOutputFolder(val)
 		elif(arg == '-result'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No result file supplied', True)
 			sysvals.result = val
@@ -986,6 +996,17 @@
 		# remaining options are only for cron job use
 		elif(arg == '-cronjob'):
 			sysvals.iscronjob = True
+		elif(arg == '-which'):
+			try:
+				val = next(args)
+			except:
+				doError('No executable supplied', True)
+			out = sysvals.getExec(val)
+			if not out:
+				print('%s not found' % val)
+				sys.exit(1)
+			print(out)
+			sys.exit(0)
 		else:
 			doError('Invalid argument: '+arg, True)
 

diff --git a/tools/power/pm-graph/sleepgraph.8 b/tools/power/pm-graph/sleepgraph.8
index 9648be6..43aee64 100644
--- a/tools/power/pm-graph/sleepgraph.8
+++ b/tools/power/pm-graph/sleepgraph.8

@@ -53,10 +53,10 @@
 Add the dmesg and ftrace logs to the html output. They will be viewable by
 clicking buttons in the timeline.
 .TP
-\fB-turbostat\fR
-Use turbostat to execute the command in freeze mode (default: disabled). This
-will provide turbostat output in the log which will tell you which actual
-power modes were entered.
+\fB-noturbostat\fR
+By default, if turbostat is found and the requested mode is freeze, sleepgraph
+will execute the suspend via turbostat and collect data in the timeline log.
+This option disables the use of turbostat.
 .TP
 \fB-result \fIfile\fR
 Export a results table to a text file for parsing.

diff --git a/tools/power/pm-graph/sleepgraph.py b/tools/power/pm-graph/sleepgraph.py
index 4f46a7a..f7d1c1f 100755
--- a/tools/power/pm-graph/sleepgraph.py
+++ b/tools/power/pm-graph/sleepgraph.py

@@ -1,9 +1,18 @@
-#!/usr/bin/python2
+#!/usr/bin/python
 # SPDX-License-Identifier: GPL-2.0-only
 #
 # Tool for analyzing suspend/resume timing
 # Copyright (c) 2013, Intel Corporation.
 #
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
 # Authors:
 #	 Todd Brandt <todd.e.brandt@linux.intel.com>
 #
@@ -48,9 +57,10 @@
 import re
 import platform
 import signal
+import codecs
 from datetime import datetime
 import struct
-import ConfigParser
+import configparser
 import gzip
 from threading import Thread
 from subprocess import call, Popen, PIPE
@@ -60,6 +70,9 @@
 	print(msg)
 	sys.stdout.flush()
 
+def ascii(text):
+	return text.decode('ascii', 'ignore')
+
 # ----------------- CLASSES --------------------
 
 # Class: SystemValues
@@ -68,7 +81,7 @@
 #	 store system values and test parameters
 class SystemValues:
 	title = 'SleepGraph'
-	version = '5.4'
+	version = '5.5'
 	ansi = False
 	rs = 0
 	display = ''
@@ -78,7 +91,7 @@
 	testlog = True
 	dmesglog = True
 	ftracelog = False
-	tstat = False
+	tstat = True
 	mindevlen = 0.0
 	mincglen = 0.0
 	cgphase = ''
@@ -147,6 +160,7 @@
 	devdump = False
 	mixedphaseheight = True
 	devprops = dict()
+	platinfo = []
 	predelay = 0
 	postdelay = 0
 	pmdebug = ''
@@ -323,13 +337,20 @@
 			sys.exit(1)
 		return False
 	def getExec(self, cmd):
-		dirlist = ['/sbin', '/bin', '/usr/sbin', '/usr/bin',
-			'/usr/local/sbin', '/usr/local/bin']
-		for path in dirlist:
+		try:
+			fp = Popen(['which', cmd], stdout=PIPE, stderr=PIPE).stdout
+			out = ascii(fp.read()).strip()
+			fp.close()
+		except:
+			out = ''
+		if out:
+			return out
+		for path in ['/sbin', '/bin', '/usr/sbin', '/usr/bin',
+			'/usr/local/sbin', '/usr/local/bin']:
 			cmdfull = os.path.join(path, cmd)
 			if os.path.exists(cmdfull):
 				return cmdfull
-		return ''
+		return out
 	def setPrecision(self, num):
 		if num < 0 or num > 6:
 			return
@@ -455,7 +476,7 @@
 		fp = Popen('dmesg', stdout=PIPE).stdout
 		ktime = '0'
 		for line in fp:
-			line = line.replace('\r\n', '')
+			line = ascii(line).replace('\r\n', '')
 			idx = line.find('[')
 			if idx > 1:
 				line = line[idx:]
@@ -469,7 +490,7 @@
 		# store all new dmesg lines since initdmesg was called
 		fp = Popen('dmesg', stdout=PIPE).stdout
 		for line in fp:
-			line = line.replace('\r\n', '')
+			line = ascii(line).replace('\r\n', '')
 			idx = line.find('[')
 			if idx > 1:
 				line = line[idx:]
@@ -501,7 +522,7 @@
 			call('cat '+self.tpath+'available_filter_functions', shell=True)
 			return
 		master = self.listFromFile(self.tpath+'available_filter_functions')
-		for i in self.tracefuncs:
+		for i in sorted(self.tracefuncs):
 			if 'func' in self.tracefuncs[i]:
 				i = self.tracefuncs[i]['func']
 			if i in master:
@@ -628,7 +649,7 @@
 		self.fsetVal(kprobeevents, 'kprobe_events')
 		if output:
 			check = self.fgetVal('kprobe_events')
-			linesack = (len(check.split('\n')) - 1) / 2
+			linesack = (len(check.split('\n')) - 1) // 2
 			pprint('    kprobe functions enabled: %d/%d' % (linesack, linesout))
 		self.fsetVal('1', 'events/kprobes/enable')
 	def testKprobe(self, kname, kprobe):
@@ -646,19 +667,19 @@
 		if linesack < linesout:
 			return False
 		return True
-	def setVal(self, val, file, mode='w'):
+	def setVal(self, val, file):
 		if not os.path.exists(file):
 			return False
 		try:
-			fp = open(file, mode, 0)
-			fp.write(val)
+			fp = open(file, 'wb', 0)
+			fp.write(val.encode())
 			fp.flush()
 			fp.close()
 		except:
 			return False
 		return True
-	def fsetVal(self, val, path, mode='w'):
-		return self.setVal(val, self.tpath+path, mode)
+	def fsetVal(self, val, path):
+		return self.setVal(val, self.tpath+path)
 	def getVal(self, file):
 		res = ''
 		if not os.path.exists(file):
@@ -719,7 +740,7 @@
 			tgtsize = min(self.memfree, bmax)
 		else:
 			tgtsize = 65536
-		while not self.fsetVal('%d' % (tgtsize / cpus), 'buffer_size_kb'):
+		while not self.fsetVal('%d' % (tgtsize // cpus), 'buffer_size_kb'):
 			# if the size failed to set, lower it and keep trying
 			tgtsize -= 65536
 			if tgtsize < 65536:
@@ -863,14 +884,23 @@
 		isgz = self.gzip
 		if mode == 'r':
 			try:
-				with gzip.open(filename, mode+'b') as fp:
+				with gzip.open(filename, mode+'t') as fp:
 					test = fp.read(64)
 				isgz = True
 			except:
 				isgz = False
 		if isgz:
-			return gzip.open(filename, mode+'b')
+			return gzip.open(filename, mode+'t')
 		return open(filename, mode)
+	def b64unzip(self, data):
+		try:
+			out = codecs.decode(base64.b64decode(data), 'zlib').decode()
+		except:
+			out = data
+		return out
+	def b64zip(self, data):
+		out = base64.b64encode(codecs.encode(data.encode(), 'zlib')).decode()
+		return out
 	def mcelog(self, clear=False):
 		cmd = self.getExec('mcelog')
 		if not cmd:
@@ -878,12 +908,124 @@
 		if clear:
 			call(cmd+' > /dev/null 2>&1', shell=True)
 			return ''
-		fp = Popen([cmd], stdout=PIPE, stderr=PIPE).stdout
-		out = fp.read().strip()
-		fp.close()
+		try:
+			fp = Popen([cmd], stdout=PIPE, stderr=PIPE).stdout
+			out = ascii(fp.read()).strip()
+			fp.close()
+		except:
+			return ''
 		if not out:
 			return ''
-		return base64.b64encode(out.encode('zlib'))
+		return self.b64zip(out)
+	def platforminfo(self):
+		# add platform info on to a completed ftrace file
+		if not os.path.exists(self.ftracefile):
+			return False
+		footer = '#\n'
+
+		# add test command string line if need be
+		if self.suspendmode == 'command' and self.testcommand:
+			footer += '# platform-testcmd: %s\n' % (self.testcommand)
+
+		# get a list of target devices from the ftrace file
+		props = dict()
+		tp = TestProps()
+		tf = self.openlog(self.ftracefile, 'r')
+		for line in tf:
+			# determine the trace data type (required for further parsing)
+			m = re.match(tp.tracertypefmt, line)
+			if(m):
+				tp.setTracerType(m.group('t'))
+				continue
+			# parse only valid lines, if this is not one move on
+			m = re.match(tp.ftrace_line_fmt, line)
+			if(not m or 'device_pm_callback_start' not in line):
+				continue
+			m = re.match('.*: (?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*', m.group('msg'));
+			if(not m):
+				continue
+			dev = m.group('d')
+			if dev not in props:
+				props[dev] = DevProps()
+		tf.close()
+
+		# now get the syspath for each target device
+		for dirname, dirnames, filenames in os.walk('/sys/devices'):
+			if(re.match('.*/power', dirname) and 'async' in filenames):
+				dev = dirname.split('/')[-2]
+				if dev in props and (not props[dev].syspath or len(dirname) < len(props[dev].syspath)):
+					props[dev].syspath = dirname[:-6]
+
+		# now fill in the properties for our target devices
+		for dev in sorted(props):
+			dirname = props[dev].syspath
+			if not dirname or not os.path.exists(dirname):
+				continue
+			with open(dirname+'/power/async') as fp:
+				text = fp.read()
+				props[dev].isasync = False
+				if 'enabled' in text:
+					props[dev].isasync = True
+			fields = os.listdir(dirname)
+			if 'product' in fields:
+				with open(dirname+'/product', 'rb') as fp:
+					props[dev].altname = ascii(fp.read())
+			elif 'name' in fields:
+				with open(dirname+'/name', 'rb') as fp:
+					props[dev].altname = ascii(fp.read())
+			elif 'model' in fields:
+				with open(dirname+'/model', 'rb') as fp:
+					props[dev].altname = ascii(fp.read())
+			elif 'description' in fields:
+				with open(dirname+'/description', 'rb') as fp:
+					props[dev].altname = ascii(fp.read())
+			elif 'id' in fields:
+				with open(dirname+'/id', 'rb') as fp:
+					props[dev].altname = ascii(fp.read())
+			elif 'idVendor' in fields and 'idProduct' in fields:
+				idv, idp = '', ''
+				with open(dirname+'/idVendor', 'rb') as fp:
+					idv = ascii(fp.read()).strip()
+				with open(dirname+'/idProduct', 'rb') as fp:
+					idp = ascii(fp.read()).strip()
+				props[dev].altname = '%s:%s' % (idv, idp)
+			if props[dev].altname:
+				out = props[dev].altname.strip().replace('\n', ' ')\
+					.replace(',', ' ').replace(';', ' ')
+				props[dev].altname = out
+
+		# add a devinfo line to the bottom of ftrace
+		out = ''
+		for dev in sorted(props):
+			out += props[dev].out(dev)
+		footer += '# platform-devinfo: %s\n' % self.b64zip(out)
+
+		# add a line for each of these commands with their outputs
+		cmds = [
+			['pcidevices', 'lspci', '-tv'],
+			['interrupts', 'cat', '/proc/interrupts'],
+			['gpecounts', 'sh', '-c', 'grep -v invalid /sys/firmware/acpi/interrupts/gpe*'],
+		]
+		for cargs in cmds:
+			name = cargs[0]
+			cmdline = ' '.join(cargs[1:])
+			cmdpath = self.getExec(cargs[1])
+			if not cmdpath:
+				continue
+			cmd = [cmdpath] + cargs[2:]
+			try:
+				fp = Popen(cmd, stdout=PIPE, stderr=PIPE).stdout
+				info = ascii(fp.read()).strip()
+				fp.close()
+			except:
+				continue
+			if not info:
+				continue
+			footer += '# platform-%s: %s | %s\n' % (name, cmdline, self.b64zip(info))
+
+		with self.openlog(self.ftracefile, 'a') as fp:
+			fp.write(footer)
+		return True
 	def haveTurbostat(self):
 		if not self.tstat:
 			return False
@@ -891,31 +1033,40 @@
 		if not cmd:
 			return False
 		fp = Popen([cmd, '-v'], stdout=PIPE, stderr=PIPE).stderr
-		out = fp.read().strip()
+		out = ascii(fp.read()).strip()
 		fp.close()
-		return re.match('turbostat version [0-9\.]* .*', out)
+		if re.match('turbostat version [0-9\.]* .*', out):
+			sysvals.vprint(out)
+			return True
+		return False
 	def turbostat(self):
 		cmd = self.getExec('turbostat')
-		if not cmd:
-			return 'missing turbostat executable'
-		text = []
+		rawout = keyline = valline = ''
 		fullcmd = '%s -q -S echo freeze > %s' % (cmd, self.powerfile)
 		fp = Popen(['sh', '-c', fullcmd], stdout=PIPE, stderr=PIPE).stderr
 		for line in fp:
-			if re.match('[0-9.]* sec', line):
+			line = ascii(line)
+			rawout += line
+			if keyline and valline:
 				continue
-			text.append(line.split())
+			if re.match('(?i)Avg_MHz.*', line):
+				keyline = line.strip().split()
+			elif keyline:
+				valline = line.strip().split()
 		fp.close()
-		if len(text) < 2:
-			return 'turbostat output format error'
+		if not keyline or not valline or len(keyline) != len(valline):
+			errmsg = 'unrecognized turbostat output:\n'+rawout.strip()
+			sysvals.vprint(errmsg)
+			if not sysvals.verbose:
+				pprint(errmsg)
+			return ''
+		if sysvals.verbose:
+			pprint(rawout.strip())
 		out = []
-		for key in text[0]:
-			values = []
-			idx = text[0].index(key)
-			for line in text[1:]:
-				if len(line) > idx:
-					values.append(line[idx])
-			out.append('%s=%s' % (key, ','.join(values)))
+		for key in keyline:
+			idx = keyline.index(key)
+			val = valline[idx]
+			out.append('%s=%s' % (key, val))
 		return '|'.join(out)
 	def checkWifi(self):
 		out = dict()
@@ -924,7 +1075,7 @@
 			return out
 		fp = Popen(iwcmd, stdout=PIPE, stderr=PIPE).stdout
 		for line in fp:
-			m = re.match('(?P<dev>\S*) .* ESSID:(?P<ess>\S*)', line)
+			m = re.match('(?P<dev>\S*) .* ESSID:(?P<ess>\S*)', ascii(line))
 			if not m:
 				continue
 			out['device'] = m.group('dev')
@@ -935,7 +1086,7 @@
 		if 'device' in out:
 			fp = Popen([ifcmd, out['device']], stdout=PIPE, stderr=PIPE).stdout
 			for line in fp:
-				m = re.match('.* inet (?P<ip>[0-9\.]*)', line)
+				m = re.match('.* inet (?P<ip>[0-9\.]*)', ascii(line))
 				if m:
 					out['ip'] = m.group('ip')
 					break
@@ -990,13 +1141,13 @@
 	def __init__(self):
 		self.syspath = ''
 		self.altname = ''
-		self.async = True
+		self.isasync = True
 		self.xtraclass = ''
 		self.xtrainfo = ''
 	def out(self, dev):
-		return '%s,%s,%d;' % (dev, self.altname, self.async)
+		return '%s,%s,%d;' % (dev, self.altname, self.isasync)
 	def debug(self, dev):
-		pprint('%s:\n\taltname = %s\n\t  async = %s' % (dev, self.altname, self.async))
+		pprint('%s:\n\taltname = %s\n\t  async = %s' % (dev, self.altname, self.isasync))
 	def altName(self, dev):
 		if not self.altname or self.altname == dev:
 			return dev
@@ -1004,13 +1155,13 @@
 	def xtraClass(self):
 		if self.xtraclass:
 			return ' '+self.xtraclass
-		if not self.async:
+		if not self.isasync:
 			return ' sync'
 		return ''
 	def xtraInfo(self):
 		if self.xtraclass:
 			return ' '+self.xtraclass
-		if self.async:
+		if self.isasync:
 			return ' async_device'
 		return ' sync_device'
 
@@ -1108,7 +1259,7 @@
 		return sorted(self.dmesg, key=lambda k:self.dmesg[k]['order'])
 	def initDevicegroups(self):
 		# called when phases are all finished being added
-		for phase in self.dmesg.keys():
+		for phase in sorted(self.dmesg.keys()):
 			if '*' in phase:
 				p = phase.split('*')
 				pnew = '%s%d' % (p[0], len(p))
@@ -1430,16 +1581,7 @@
 		return phase
 	def sortedDevices(self, phase):
 		list = self.dmesg[phase]['list']
-		slist = []
-		tmp = dict()
-		for devname in list:
-			dev = list[devname]
-			if dev['length'] == 0:
-				continue
-			tmp[dev['start']] = devname
-		for t in sorted(tmp):
-			slist.append(tmp[t])
-		return slist
+		return sorted(list, key=lambda k:list[k]['start'])
 	def fixupInitcalls(self, phase):
 		# if any calls never returned, clip them at system resume end
 		phaselist = self.dmesg[phase]['list']
@@ -1576,7 +1718,7 @@
 				maxname = '%d' % self.maxDeviceNameSize(phase)
 				fmt = '%3d) %'+maxname+'s - %f - %f'
 				c = 1
-				for name in devlist:
+				for name in sorted(devlist):
 					s = devlist[name]['start']
 					e = devlist[name]['end']
 					sysvals.vprint(fmt % (c, name, s, e))
@@ -1588,7 +1730,7 @@
 		devlist = []
 		for phase in self.sortedPhases():
 			list = self.deviceChildren(devname, phase)
-			for dev in list:
+			for dev in sorted(list):
 				if dev not in devlist:
 					devlist.append(dev)
 		return devlist
@@ -1628,16 +1770,16 @@
 	def rootDeviceList(self):
 		# list of devices graphed
 		real = []
-		for phase in self.dmesg:
+		for phase in self.sortedPhases():
 			list = self.dmesg[phase]['list']
-			for dev in list:
+			for dev in sorted(list):
 				if list[dev]['pid'] >= 0 and dev not in real:
 					real.append(dev)
 		# list of top-most root devices
 		rootlist = []
-		for phase in self.dmesg:
+		for phase in self.sortedPhases():
 			list = self.dmesg[phase]['list']
-			for dev in list:
+			for dev in sorted(list):
 				pdev = list[dev]['par']
 				pid = list[dev]['pid']
 				if(pid < 0 or re.match('[0-9]*-[0-9]*\.[0-9]*[\.0-9]*\:[\.0-9]*$', pdev)):
@@ -1718,9 +1860,9 @@
 	def createProcessUsageEvents(self):
 		# get an array of process names
 		proclist = []
-		for t in self.pstl:
+		for t in sorted(self.pstl):
 			pslist = self.pstl[t]
-			for ps in pslist:
+			for ps in sorted(pslist):
 				if ps not in proclist:
 					proclist.append(ps)
 		# get a list of data points for suspend and resume
@@ -1765,7 +1907,7 @@
 	def debugPrint(self):
 		for p in self.sortedPhases():
 			list = self.dmesg[p]['list']
-			for devname in list:
+			for devname in sorted(list):
 				dev = list[devname]
 				if 'ftrace' in dev:
 					dev['ftrace'].debugPrint(' [%s]' % devname)
@@ -2466,7 +2608,7 @@
 		# if there is 1 line per row, draw them the standard way
 		for t, p in standardphases:
 			for i in sorted(self.rowheight[t][p]):
-				self.rowheight[t][p][i] = self.bodyH/len(self.rowlines[t][p])
+				self.rowheight[t][p][i] = float(self.bodyH)/len(self.rowlines[t][p])
 	def createZoomBox(self, mode='command', testcount=1):
 		# Create bounding box, add buttons
 		html_zoombox = '<center><button id="zoomin">ZOOM IN +</button><button id="zoomout">ZOOM OUT -</button><button id="zoomdef">ZOOM 1:1</button></center>\n'
@@ -2537,6 +2679,7 @@
 	cmdlinefmt = '^# command \| (?P<cmd>.*)'
 	kparamsfmt = '^# kparams \| (?P<kp>.*)'
 	devpropfmt = '# Device Properties: .*'
+	pinfofmt   = '# platform-(?P<val>[a-z,A-Z,0-9]*): (?P<info>.*)'
 	tracertypefmt = '# tracer: (?P<t>.*)'
 	firmwarefmt = '# fwsuspend (?P<s>[0-9]*) fwresume (?P<r>[0-9]*)$'
 	procexecfmt = 'ps - (?P<ps>.*)$'
@@ -2571,12 +2714,6 @@
 			self.ftrace_line_fmt = self.ftrace_line_fmt_nop
 		else:
 			doError('Invalid tracer format: [%s]' % tracer)
-	def decode(self, data):
-		try:
-			out = base64.b64decode(data).decode('zlib')
-		except:
-			out = data
-		return out
 	def stampInfo(self, line):
 		if re.match(self.stampfmt, line):
 			self.stamp = line
@@ -2660,7 +2797,7 @@
 		if len(self.mcelog) > data.testnumber:
 			m = re.match(self.mcelogfmt, self.mcelog[data.testnumber])
 			if m:
-				data.mcelog = self.decode(m.group('m'))
+				data.mcelog = sv.b64unzip(m.group('m'))
 		# turbostat data
 		if len(self.turbostat) > data.testnumber:
 			m = re.match(self.tstatfmt, self.turbostat[data.testnumber])
@@ -2681,6 +2818,46 @@
 			m = re.match(self.testerrfmt, self.testerror[data.testnumber])
 			if m:
 				data.enterfail = m.group('e')
+	def devprops(self, data):
+		props = dict()
+		devlist = data.split(';')
+		for dev in devlist:
+			f = dev.split(',')
+			if len(f) < 3:
+				continue
+			dev = f[0]
+			props[dev] = DevProps()
+			props[dev].altname = f[1]
+			if int(f[2]):
+				props[dev].isasync = True
+			else:
+				props[dev].isasync = False
+		return props
+	def parseDevprops(self, line, sv):
+		idx = line.index(': ') + 2
+		if idx >= len(line):
+			return
+		props = self.devprops(line[idx:])
+		if sv.suspendmode == 'command' and 'testcommandstring' in props:
+			sv.testcommand = props['testcommandstring'].altname
+		sv.devprops = props
+	def parsePlatformInfo(self, line, sv):
+		m = re.match(self.pinfofmt, line)
+		if not m:
+			return
+		name, info = m.group('val'), m.group('info')
+		if name == 'devinfo':
+			sv.devprops = self.devprops(sv.b64unzip(info))
+			return
+		elif name == 'testcmd':
+			sv.testcommand = info
+			return
+		field = info.split('|')
+		if len(field) < 2:
+			return
+		cmdline = field[0].strip()
+		output = sv.b64unzip(field[1].strip())
+		sv.platinfo.append([name, cmdline, output])
 
 # Class: TestRun
 # Description:
@@ -2701,7 +2878,7 @@
 		process = Popen(c, shell=True, stdout=PIPE)
 		running = dict()
 		for line in process.stdout:
-			data = line.split()
+			data = ascii(line).split()
 			pid = data[0]
 			name = re.sub('[()]', '', data[1])
 			user = int(data[13])
@@ -2805,7 +2982,11 @@
 			continue
 		# device properties line
 		if(re.match(tp.devpropfmt, line)):
-			devProps(line)
+			tp.parseDevprops(line, sysvals)
+			continue
+		# platform info line
+		if(re.match(tp.pinfofmt, line)):
+			tp.parsePlatformInfo(line, sysvals)
 			continue
 		# parse only valid lines, if this is not one move on
 		m = re.match(tp.ftrace_line_fmt, line)
@@ -2902,7 +3083,7 @@
 		sysvals.setupAllKprobes()
 	ksuscalls = ['pm_prepare_console']
 	krescalls = ['pm_restore_console']
-	tracewatch = []
+	tracewatch = ['irq_wakeup']
 	if sysvals.usekprobes:
 		tracewatch += ['sync_filesystems', 'freeze_processes', 'syscore_suspend',
 			'syscore_resume', 'resume_console', 'thaw_processes', 'CPU_ON',
@@ -2928,7 +3109,11 @@
 			continue
 		# device properties line
 		if(re.match(tp.devpropfmt, line)):
-			devProps(line)
+			tp.parseDevprops(line, sysvals)
+			continue
+		# platform info line
+		if(re.match(tp.pinfofmt, line)):
+			tp.parsePlatformInfo(line, sysvals)
 			continue
 		# ignore all other commented lines
 		if line[0] == '#':
@@ -3001,16 +3186,11 @@
 					isbegin = False
 				else:
 					continue
-				m = re.match('(?P<name>.*)\[(?P<val>[0-9]*)\] .*', t.name)
-				if(m):
-					val = m.group('val')
-					if val == '0':
-						name = m.group('name')
-					else:
-						name = m.group('name')+'['+val+']'
+				if '[' in t.name:
+					m = re.match('(?P<name>.*)\[.*', t.name)
 				else:
 					m = re.match('(?P<name>.*) .*', t.name)
-					name = m.group('name')
+				name = m.group('name')
 				# ignore these events
 				if(name.split('[')[0] in tracewatch):
 					continue
@@ -3045,6 +3225,8 @@
 				elif(re.match('machine_suspend\[.*', t.name)):
 					if(isbegin):
 						lp = data.lastPhase()
+						if lp == 'resume_machine':
+							data.dmesg[lp]['end'] = t.time
 						phase = data.setPhase('suspend_machine', data.dmesg[lp]['end'], True)
 						data.setPhase(phase, t.time, False)
 						if data.tSuspended == 0:
@@ -3213,11 +3395,11 @@
 		# add the traceevent data to the device hierarchy
 		if(sysvals.usetraceevents):
 			# add actual trace funcs
-			for name in test.ttemp:
+			for name in sorted(test.ttemp):
 				for event in test.ttemp[name]:
 					data.newActionGlobal(name, event['begin'], event['end'], event['pid'])
 			# add the kprobe based virtual tracefuncs as actual devices
-			for key in tp.ktemp:
+			for key in sorted(tp.ktemp):
 				name, pid = key
 				if name not in sysvals.tracefuncs:
 					continue
@@ -3231,7 +3413,7 @@
 					data.newActionGlobal(e['name'], kb, ke, pid, color)
 			# add config base kprobes and dev kprobes
 			if sysvals.usedevsrc:
-				for key in tp.ktemp:
+				for key in sorted(tp.ktemp):
 					name, pid = key
 					if name in sysvals.tracefuncs or name not in sysvals.dev_tracefuncs:
 						continue
@@ -3244,7 +3426,7 @@
 		if sysvals.usecallgraph:
 			# add the callgraph data to the device hierarchy
 			sortlist = dict()
-			for key in test.ftemp:
+			for key in sorted(test.ftemp):
 				proc, pid = key
 				for cg in test.ftemp[key]:
 					if len(cg.list) < 1 or cg.invalid or (cg.end - cg.start == 0):
@@ -3582,7 +3764,7 @@
 		# if trace events are not available, these are better than nothing
 		if(not sysvals.usetraceevents):
 			# look for known actions
-			for a in at:
+			for a in sorted(at):
 				if(re.match(at[a]['smsg'], msg)):
 					if(a not in actions):
 						actions[a] = []
@@ -3641,7 +3823,7 @@
 		data.tResumed = data.tSuspended
 
 	# fill in any actions we've found
-	for name in actions:
+	for name in sorted(actions):
 		for event in actions[name]:
 			data.newActionGlobal(name, event['begin'], event['end'])
 
@@ -3761,7 +3943,7 @@
 		if lastmode and lastmode != mode and num > 0:
 			for i in range(2):
 				s = sorted(tMed[i])
-				list[lastmode]['med'][i] = s[int(len(s)/2)]
+				list[lastmode]['med'][i] = s[int(len(s)//2)]
 				iMed[i] = tMed[i][list[lastmode]['med'][i]]
 			list[lastmode]['avg'] = [tAvg[0] / num, tAvg[1] / num]
 			list[lastmode]['min'] = tMin
@@ -3803,7 +3985,7 @@
 	if lastmode and num > 0:
 		for i in range(2):
 			s = sorted(tMed[i])
-			list[lastmode]['med'][i] = s[int(len(s)/2)]
+			list[lastmode]['med'][i] = s[int(len(s)//2)]
 			iMed[i] = tMed[i][list[lastmode]['med'][i]]
 		list[lastmode]['avg'] = [tAvg[0] / num, tAvg[1] / num]
 		list[lastmode]['min'] = tMin
@@ -3845,7 +4027,7 @@
 		'</tr>\n'
 	headnone = '<tr class="head"><td>{0}</td><td>{1}</td><td colspan='+\
 		colspan+'></td></tr>\n'
-	for mode in list:
+	for mode in sorted(list):
 		# header line for each suspend mode
 		num = 0
 		tAvg, tMin, tMax, tMed = list[mode]['avg'], list[mode]['min'],\
@@ -3944,7 +4126,8 @@
 			th.format('Average Time') + th.format('Count') +\
 			th.format('Worst Time') + th.format('Host (worst time)') +\
 			th.format('Link (worst time)') + '</tr>\n'
-		for name in sorted(devlist, key=lambda k:devlist[k]['worst'], reverse=True):
+		for name in sorted(devlist, key=lambda k:(devlist[k]['worst'], \
+			devlist[k]['total'], devlist[k]['name']), reverse=True):
 			data = devall[type][name]
 			data['average'] = data['total'] / data['count']
 			if data['average'] < limit:
@@ -4085,7 +4268,7 @@
 		if(tTotal == 0):
 			doError('No timeline data')
 		if(len(data.tLow) > 0):
-			low_time = '|'.join(data.tLow)
+			low_time = '+'.join(data.tLow)
 		if sysvals.suspendmode == 'command':
 			run_time = '%.0f'%((data.end-data.start)*1000)
 			if sysvals.testcommand:
@@ -4151,7 +4334,7 @@
 		for group in data.devicegroups:
 			devlist = []
 			for phase in group:
-				for devname in data.tdevlist[phase]:
+				for devname in sorted(data.tdevlist[phase]):
 					d = DevItem(data.testnumber, phase, data.dmesg[phase]['list'][devname])
 					devlist.append(d)
 					if d.isa('kth'):
@@ -4230,7 +4413,7 @@
 			for b in phases[dir]:
 				# draw the devices for this phase
 				phaselist = data.dmesg[b]['list']
-				for d in data.tdevlist[b]:
+				for d in sorted(data.tdevlist[b]):
 					name = d
 					drv = ''
 					dev = phaselist[d]
@@ -4971,13 +5154,9 @@
 			if mode == 'freeze' and sysvals.haveTurbostat():
 				# execution will pause here
 				turbo = sysvals.turbostat()
-				if '|' in turbo:
+				if turbo:
 					tdata['turbo'] = turbo
-				else:
-					tdata['error'] = turbo
 			else:
-				if sysvals.haveTurbostat():
-					sysvals.vprint('WARNING: ignoring turbostat in mode "%s"' % mode)
 				pf = open(sysvals.powerfile, 'w')
 				pf.write(mode)
 				# execution will pause here
@@ -5024,7 +5203,7 @@
 			op.write(line)
 		op.close()
 		sysvals.fsetVal('', 'trace')
-		devProps()
+		sysvals.platforminfo()
 	return testdata
 
 def readFile(file):
@@ -5040,9 +5219,9 @@
 #	 The time string, e.g. "1901m16s"
 def ms2nice(val):
 	val = int(val)
-	h = val / 3600000
-	m = (val / 60000) % 60
-	s = (val / 1000) % 60
+	h = val // 3600000
+	m = (val // 60000) % 60
+	s = (val // 1000) % 60
 	if h > 0:
 		return '%d:%02d:%02d' % (h, m, s)
 	if m > 0:
@@ -5115,127 +5294,6 @@
 		print(lines[i])
 	return res
 
-# Function: devProps
-# Description:
-#	 Retrieve a list of properties for all devices in the trace log
-def devProps(data=0):
-	props = dict()
-
-	if data:
-		idx = data.index(': ') + 2
-		if idx >= len(data):
-			return
-		devlist = data[idx:].split(';')
-		for dev in devlist:
-			f = dev.split(',')
-			if len(f) < 3:
-				continue
-			dev = f[0]
-			props[dev] = DevProps()
-			props[dev].altname = f[1]
-			if int(f[2]):
-				props[dev].async = True
-			else:
-				props[dev].async = False
-			sysvals.devprops = props
-		if sysvals.suspendmode == 'command' and 'testcommandstring' in props:
-			sysvals.testcommand = props['testcommandstring'].altname
-		return
-
-	if(os.path.exists(sysvals.ftracefile) == False):
-		doError('%s does not exist' % sysvals.ftracefile)
-
-	# first get the list of devices we need properties for
-	msghead = 'Additional data added by AnalyzeSuspend'
-	alreadystamped = False
-	tp = TestProps()
-	tf = sysvals.openlog(sysvals.ftracefile, 'r')
-	for line in tf:
-		if msghead in line:
-			alreadystamped = True
-			continue
-		# determine the trace data type (required for further parsing)
-		m = re.match(tp.tracertypefmt, line)
-		if(m):
-			tp.setTracerType(m.group('t'))
-			continue
-		# parse only valid lines, if this is not one move on
-		m = re.match(tp.ftrace_line_fmt, line)
-		if(not m or 'device_pm_callback_start' not in line):
-			continue
-		m = re.match('.*: (?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*', m.group('msg'));
-		if(not m):
-			continue
-		dev = m.group('d')
-		if dev not in props:
-			props[dev] = DevProps()
-	tf.close()
-
-	if not alreadystamped and sysvals.suspendmode == 'command':
-		out = '#\n# '+msghead+'\n# Device Properties: '
-		out += 'testcommandstring,%s,0;' % (sysvals.testcommand)
-		with sysvals.openlog(sysvals.ftracefile, 'a') as fp:
-			fp.write(out+'\n')
-		sysvals.devprops = props
-		return
-
-	# now get the syspath for each of our target devices
-	for dirname, dirnames, filenames in os.walk('/sys/devices'):
-		if(re.match('.*/power', dirname) and 'async' in filenames):
-			dev = dirname.split('/')[-2]
-			if dev in props and (not props[dev].syspath or len(dirname) < len(props[dev].syspath)):
-				props[dev].syspath = dirname[:-6]
-
-	# now fill in the properties for our target devices
-	for dev in props:
-		dirname = props[dev].syspath
-		if not dirname or not os.path.exists(dirname):
-			continue
-		with open(dirname+'/power/async') as fp:
-			text = fp.read()
-			props[dev].async = False
-			if 'enabled' in text:
-				props[dev].async = True
-		fields = os.listdir(dirname)
-		if 'product' in fields:
-			with open(dirname+'/product') as fp:
-				props[dev].altname = fp.read()
-		elif 'name' in fields:
-			with open(dirname+'/name') as fp:
-				props[dev].altname = fp.read()
-		elif 'model' in fields:
-			with open(dirname+'/model') as fp:
-				props[dev].altname = fp.read()
-		elif 'description' in fields:
-			with open(dirname+'/description') as fp:
-				props[dev].altname = fp.read()
-		elif 'id' in fields:
-			with open(dirname+'/id') as fp:
-				props[dev].altname = fp.read()
-		elif 'idVendor' in fields and 'idProduct' in fields:
-			idv, idp = '', ''
-			with open(dirname+'/idVendor') as fp:
-				idv = fp.read().strip()
-			with open(dirname+'/idProduct') as fp:
-				idp = fp.read().strip()
-			props[dev].altname = '%s:%s' % (idv, idp)
-
-		if props[dev].altname:
-			out = props[dev].altname.strip().replace('\n', ' ')
-			out = out.replace(',', ' ')
-			out = out.replace(';', ' ')
-			props[dev].altname = out
-
-	# and now write the data to the ftrace file
-	if not alreadystamped:
-		out = '#\n# '+msghead+'\n# Device Properties: '
-		for dev in sorted(props):
-			out += props[dev].out(dev)
-		with sysvals.openlog(sysvals.ftracefile, 'a') as fp:
-			fp.write(out+'\n')
-
-	sysvals.devprops = props
-
 # Function: getModes
 # Description:
 #	 Determine the supported power modes on this system
@@ -5339,11 +5397,11 @@
 	# search for either an SM table or DMI table
 	i = base = length = num = 0
 	while(i < memsize):
-		if buf[i:i+4] == '_SM_' and i < memsize - 16:
+		if buf[i:i+4] == b'_SM_' and i < memsize - 16:
 			length = struct.unpack('H', buf[i+22:i+24])[0]
 			base, num = struct.unpack('IH', buf[i+24:i+30])
 			break
-		elif buf[i:i+5] == '_DMI_':
+		elif buf[i:i+5] == b'_DMI_':
 			length = struct.unpack('H', buf[i+6:i+8])[0]
 			base, num = struct.unpack('IH', buf[i+8:i+14])
 			break
@@ -5376,15 +5434,15 @@
 			if 0 == struct.unpack('H', buf[n:n+2])[0]:
 				break
 			n += 1
-		data = buf[i+size:n+2].split('\0')
+		data = buf[i+size:n+2].split(b'\0')
 		for name in info:
 			itype, idxadr = info[name]
 			if itype == type:
-				idx = struct.unpack('B', buf[i+idxadr])[0]
+				idx = struct.unpack('B', buf[i+idxadr:i+idxadr+1])[0]
 				if idx > 0 and idx < len(data) - 1:
-					s = data[idx-1].strip()
-					if s and s.lower() != 'to be filled by o.e.m.':
-						out[name] = data[idx-1]
+					s = data[idx-1].decode('utf-8')
+					if s.strip() and s.strip().lower() != 'to be filled by o.e.m.':
+						out[name] = s
 		i = n + 2
 		count += 1
 	return out
@@ -5409,7 +5467,7 @@
 	return (ac, charge)
 
 def displayControl(cmd):
-	xset, ret = 'xset -d :0.0 {0}', 0
+	xset, ret = 'timeout 10 xset -d :0.0 {0}', 0
 	if sysvals.sudouser:
 		xset = 'sudo -u %s %s' % (sysvals.sudouser, xset)
 	if cmd == 'init':
@@ -5433,7 +5491,7 @@
 		fp = Popen(xset.format('q').split(' '), stdout=PIPE).stdout
 		ret = 'unknown'
 		for line in fp:
-			m = re.match('[\s]*Monitor is (?P<m>.*)', line)
+			m = re.match('[\s]*Monitor is (?P<m>.*)', ascii(line))
 			if(m and len(m.group('m')) >= 2):
 				out = m.group('m').lower()
 				ret = out[3:] if out[0:2] == 'in' else out
@@ -5495,10 +5553,11 @@
 		'               OEM Revision : %u\n'\
 		'                 Creator ID : %s\n'\
 		'           Creator Revision : 0x%x\n'\
-		'' % (table[0], table[0], table[1], table[2], table[3],
-			table[4], table[5], table[6], table[7], table[8]))
+		'' % (ascii(table[0]), ascii(table[0]), table[1], table[2],
+			table[3], ascii(table[4]), ascii(table[5]), table[6],
+			ascii(table[7]), table[8]))
 
-	if(table[0] != 'FPDT'):
+	if(table[0] != b'FPDT'):
 		if(output):
 			doError('Invalid FPDT table')
 		return False
@@ -5530,8 +5589,8 @@
 			return [0, 0]
 		rechead = struct.unpack('4sI', first)
 		recdata = fp.read(rechead[1]-8)
-		if(rechead[0] == 'FBPT'):
-			record = struct.unpack('HBBIQQQQQ', recdata)
+		if(rechead[0] == b'FBPT'):
+			record = struct.unpack('HBBIQQQQQ', recdata[:48])
 			if(output):
 				pprint('%s (%s)\n'\
 				'                  Reset END : %u ns\n'\
@@ -5539,11 +5598,11 @@
 				' OS Loader StartImage Start : %u ns\n'\
 				'     ExitBootServices Entry : %u ns\n'\
 				'      ExitBootServices Exit : %u ns'\
-				'' % (rectype[header[0]], rechead[0], record[4], record[5],
+				'' % (rectype[header[0]], ascii(rechead[0]), record[4], record[5],
 					record[6], record[7], record[8]))
-		elif(rechead[0] == 'S3PT'):
+		elif(rechead[0] == b'S3PT'):
 			if(output):
-				pprint('%s (%s)' % (rectype[header[0]], rechead[0]))
+				pprint('%s (%s)' % (rectype[header[0]], ascii(rechead[0])))
 			j = 0
 			while(j < len(recdata)):
 				prechead = struct.unpack('HBB', recdata[j:j+4])
@@ -5689,7 +5748,7 @@
 def getArgInt(name, args, min, max, main=True):
 	if main:
 		try:
-			arg = args.next()
+			arg = next(args)
 		except:
 			doError(name+': no argument supplied', True)
 	else:
@@ -5708,7 +5767,7 @@
 def getArgFloat(name, args, min, max, main=True):
 	if main:
 		try:
-			arg = args.next()
+			arg = next(args)
 		except:
 			doError(name+': no argument supplied', True)
 	else:
@@ -5737,9 +5796,12 @@
 			parseKernelLog(data)
 		if(sysvals.ftracefile and (sysvals.usecallgraph or sysvals.usetraceevents)):
 			appendIncompleteTraceLog(testruns)
+	shown = ['bios', 'biosdate', 'cpu', 'host', 'kernel', 'man', 'memfr',
+			'memsz', 'mode', 'numcpu', 'plat', 'time']
 	sysvals.vprint('System Info:')
 	for key in sorted(sysvals.stamp):
-		sysvals.vprint('    %-8s : %s' % (key.upper(), sysvals.stamp[key]))
+		if key in shown:
+			sysvals.vprint('    %-8s : %s' % (key.upper(), sysvals.stamp[key]))
 	if sysvals.kparams:
 		sysvals.vprint('Kparams:\n    %s' % sysvals.kparams)
 	sysvals.vprint('Command:\n    %s' % sysvals.cmdline)
@@ -5768,6 +5830,12 @@
 				(w[0], w[1])
 			sysvals.vprint(s)
 		data.printDetails()
+		if len(sysvals.platinfo) > 0:
+			sysvals.vprint('\nPlatform Info:')
+			for info in sysvals.platinfo:
+				sysvals.vprint(info[0]+' - '+info[1])
+				sysvals.vprint(info[2])
+			sysvals.vprint('')
 	if sysvals.cgdump:
 		for data in testruns:
 			data.debugPrint()
@@ -5951,7 +6019,7 @@
 		worst[d] = {'name':'', 'time': 0.0}
 		dev = devices[d] if d in devices else 0
 		if dev and len(dev.keys()) > 0:
-			n = sorted(dev, key=dev.get, reverse=True)[0]
+			n = sorted(dev, key=lambda k:(dev[k], k), reverse=True)[0]
 			worst[d]['name'], worst[d]['time'] = n, dev[n]
 	data = {
 		'mode': stmp[2],
@@ -5976,7 +6044,7 @@
 		data['funclist'] = find_in_html(html, '<div title="', '" class="traceevent"', False)
 	return data
 
-def genHtml(subdir):
+def genHtml(subdir, force=False):
 	for dirname, dirnames, filenames in os.walk(subdir):
 		sysvals.dmesgfile = sysvals.ftracefile = sysvals.htmlfile = ''
 		for filename in filenames:
@@ -5986,7 +6054,7 @@
 				sysvals.ftracefile = os.path.join(dirname, filename)
 		sysvals.setOutputFile()
 		if sysvals.ftracefile and sysvals.htmlfile and \
-			not os.path.exists(sysvals.htmlfile):
+			(force or not os.path.exists(sysvals.htmlfile)):
 			pprint('FTRACE: %s' % sysvals.ftracefile)
 			if sysvals.dmesgfile:
 				pprint('DMESG : %s' % sysvals.dmesgfile)
@@ -6042,7 +6110,7 @@
 # Description:
 #	 Configure the script via the info in a config file
 def configFromFile(file):
-	Config = ConfigParser.ConfigParser()
+	Config = configparser.ConfigParser()
 
 	Config.read(file)
 	sections = Config.sections()
@@ -6270,7 +6338,7 @@
 	'                default: suspend-{date}-{time}\n'\
 	'   -rtcwake t   Wakeup t seconds after suspend, set t to "off" to disable (default: 15)\n'\
 	'   -addlogs     Add the dmesg and ftrace logs to the html output\n'\
-	'   -turbostat   Use turbostat to execute the command in freeze mode (default: disabled)\n'\
+	'   -noturbostat Dont use turbostat in freeze mode (default: disabled)\n'\
 	'   -srgap       Add a visible gap in the timeline between sus/res (default: disabled)\n'\
 	'   -skiphtml    Run the test and capture the trace logs, but skip the timeline (default: disabled)\n'\
 	'   -result fn   Export a results table to a text file for parsing.\n'\
@@ -6340,7 +6408,7 @@
 	for arg in args:
 		if(arg == '-m'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No mode supplied', True)
 			if val == 'command' and not sysvals.testcommand:
@@ -6384,10 +6452,8 @@
 			sysvals.dmesglog = True
 		elif(arg == '-addlogftrace'):
 			sysvals.ftracelog = True
-		elif(arg == '-turbostat'):
-			sysvals.tstat = True
-			if not sysvals.haveTurbostat():
-				doError('Turbostat command not found')
+		elif(arg == '-noturbostat'):
+			sysvals.tstat = False
 		elif(arg == '-verbose'):
 			sysvals.verbose = True
 		elif(arg == '-proc'):
@@ -6400,7 +6466,7 @@
 			sysvals.gzip = True
 		elif(arg == '-rs'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('-rs requires "enable" or "disable"', True)
 			if val.lower() in switchvalues:
@@ -6412,7 +6478,7 @@
 				doError('invalid option: %s, use "enable/disable" or "on/off"' % val, True)
 		elif(arg == '-display'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('-display requires an mode value', True)
 			disopt = ['on', 'off', 'standby', 'suspend']
@@ -6423,7 +6489,7 @@
 			sysvals.max_graph_depth = getArgInt('-maxdepth', args, 0, 1000)
 		elif(arg == '-rtcwake'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No rtcwake time supplied', True)
 			if val.lower() in switchoff:
@@ -6443,7 +6509,7 @@
 			sysvals.cgtest = getArgInt('-cgtest', args, 0, 1)
 		elif(arg == '-cgphase'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No phase name supplied', True)
 			d = Data(0)
@@ -6453,19 +6519,19 @@
 			sysvals.cgphase = val
 		elif(arg == '-cgfilter'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No callgraph functions supplied', True)
 			sysvals.setCallgraphFilter(val)
 		elif(arg == '-skipkprobe'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No kprobe functions supplied', True)
 			sysvals.skipKprobes(val)
 		elif(arg == '-cgskip'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No file supplied', True)
 			if val.lower() in switchoff:
@@ -6480,7 +6546,7 @@
 			sysvals.callloopmaxlen = getArgFloat('-callloop-maxlen', args, 0.0, 1.0)
 		elif(arg == '-cmd'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No command string supplied', True)
 			sysvals.testcommand = val
@@ -6495,13 +6561,13 @@
 			sysvals.multitest['delay'] = getArgInt('-multi n d (delay between tests)', args, 0, 3600)
 		elif(arg == '-o'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No subdirectory name supplied', True)
 			sysvals.outdir = sysvals.setOutputFolder(val)
 		elif(arg == '-config'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No text file supplied', True)
 			file = sysvals.configFile(val)
@@ -6510,7 +6576,7 @@
 			configFromFile(file)
 		elif(arg == '-fadd'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No text file supplied', True)
 			file = sysvals.configFile(val)
@@ -6519,7 +6585,7 @@
 			sysvals.addFtraceFilterFunctions(file)
 		elif(arg == '-dmesg'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No dmesg file supplied', True)
 			sysvals.notestrun = True
@@ -6528,7 +6594,7 @@
 				doError('%s does not exist' % sysvals.dmesgfile)
 		elif(arg == '-ftrace'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No ftrace file supplied', True)
 			sysvals.notestrun = True
@@ -6537,7 +6603,7 @@
 				doError('%s does not exist' % sysvals.ftracefile)
 		elif(arg == '-summary'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No directory supplied', True)
 			cmd = 'summary'
@@ -6547,13 +6613,13 @@
 				doError('%s is not accesible' % val)
 		elif(arg == '-filter'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No devnames supplied', True)
 			sysvals.setDeviceFilter(val)
 		elif(arg == '-result'):
 			try:
-				val = args.next()
+				val = next(args)
 			except:
 				doError('No result file supplied', True)
 			sysvals.result = val