blob: 17d836cc84e8fa6ad6ae9aaacbec9b6fc909f63a [file] [log] [blame]
/*
* Copyright (c) Yann Collet, Facebook, Inc.
* All rights reserved.
*
* This source code is licensed under both the BSD-style license (found in the
* LICENSE file in the root directory of this source tree) and the GPLv2 (found
* in the COPYING file in the root directory of this source tree).
* You may select, at your option, one of the above-listed licenses.
*/
/*-*************************************
* Dependencies
***************************************/
#include "zstd_compress_superblock.h"
#include "../common/zstd_internal.h" /* ZSTD_getSequenceLength */
#include "hist.h" /* HIST_countFast_wksp */
#include "zstd_compress_internal.h" /* ZSTD_[huf|fse|entropy]CTablesMetadata_t */
#include "zstd_compress_sequences.h"
#include "zstd_compress_literals.h"
/* ZSTD_compressSubBlock_literal() :
* Compresses literals section for a sub-block.
* When we have to write the Huffman table we will sometimes choose a header
* size larger than necessary. This is because we have to pick the header size
* before we know the table size + compressed size, so we have a bound on the
* table size. If we guessed incorrectly, we fall back to uncompressed literals.
*
* We write the header when writeEntropy=1 and set entropyWritten=1 when we succeeded
* in writing the header, otherwise it is set to 0.
*
* hufMetadata->hType has literals block type info.
* If it is set_basic, all sub-blocks literals section will be Raw_Literals_Block.
* If it is set_rle, all sub-blocks literals section will be RLE_Literals_Block.
* If it is set_compressed, first sub-block's literals section will be Compressed_Literals_Block
* If it is set_compressed, first sub-block's literals section will be Treeless_Literals_Block
* and the following sub-blocks' literals sections will be Treeless_Literals_Block.
* @return : compressed size of literals section of a sub-block
* Or 0 if it unable to compress.
* Or error code */
static size_t ZSTD_compressSubBlock_literal(const HUF_CElt* hufTable,
const ZSTD_hufCTablesMetadata_t* hufMetadata,
const BYTE* literals, size_t litSize,
void* dst, size_t dstSize,
const int bmi2, int writeEntropy, int* entropyWritten)
{
size_t const header = writeEntropy ? 200 : 0;
size_t const lhSize = 3 + (litSize >= (1 KB - header)) + (litSize >= (16 KB - header));
BYTE* const ostart = (BYTE*)dst;
BYTE* const oend = ostart + dstSize;
BYTE* op = ostart + lhSize;
U32 const singleStream = lhSize == 3;
symbolEncodingType_e hType = writeEntropy ? hufMetadata->hType : set_repeat;
size_t cLitSize = 0;
(void)bmi2; /* TODO bmi2... */
DEBUGLOG(5, "ZSTD_compressSubBlock_literal (litSize=%zu, lhSize=%zu, writeEntropy=%d)", litSize, lhSize, writeEntropy);
*entropyWritten = 0;
if (litSize == 0 || hufMetadata->hType == set_basic) {
DEBUGLOG(5, "ZSTD_compressSubBlock_literal using raw literal");
return ZSTD_noCompressLiterals(dst, dstSize, literals, litSize);
} else if (hufMetadata->hType == set_rle) {
DEBUGLOG(5, "ZSTD_compressSubBlock_literal using rle literal");
return ZSTD_compressRleLiteralsBlock(dst, dstSize, literals, litSize);
}
assert(litSize > 0);
assert(hufMetadata->hType == set_compressed || hufMetadata->hType == set_repeat);
if (writeEntropy && hufMetadata->hType == set_compressed) {
ZSTD_memcpy(op, hufMetadata->hufDesBuffer, hufMetadata->hufDesSize);
op += hufMetadata->hufDesSize;
cLitSize += hufMetadata->hufDesSize;
DEBUGLOG(5, "ZSTD_compressSubBlock_literal (hSize=%zu)", hufMetadata->hufDesSize);
}
/* TODO bmi2 */
{ const size_t cSize = singleStream ? HUF_compress1X_usingCTable(op, oend-op, literals, litSize, hufTable)
: HUF_compress4X_usingCTable(op, oend-op, literals, litSize, hufTable);
op += cSize;
cLitSize += cSize;
if (cSize == 0 || ERR_isError(cSize)) {
DEBUGLOG(5, "Failed to write entropy tables %s", ZSTD_getErrorName(cSize));
return 0;
}
/* If we expand and we aren't writing a header then emit uncompressed */
if (!writeEntropy && cLitSize >= litSize) {
DEBUGLOG(5, "ZSTD_compressSubBlock_literal using raw literal because uncompressible");
return ZSTD_noCompressLiterals(dst, dstSize, literals, litSize);
}
/* If we are writing headers then allow expansion that doesn't change our header size. */
if (lhSize < (size_t)(3 + (cLitSize >= 1 KB) + (cLitSize >= 16 KB))) {
assert(cLitSize > litSize);
DEBUGLOG(5, "Literals expanded beyond allowed header size");
return ZSTD_noCompressLiterals(dst, dstSize, literals, litSize);
}
DEBUGLOG(5, "ZSTD_compressSubBlock_literal (cSize=%zu)", cSize);
}
/* Build header */
switch(lhSize)
{
case 3: /* 2 - 2 - 10 - 10 */
{ U32 const lhc = hType + ((!singleStream) << 2) + ((U32)litSize<<4) + ((U32)cLitSize<<14);
MEM_writeLE24(ostart, lhc);
break;
}
case 4: /* 2 - 2 - 14 - 14 */
{ U32 const lhc = hType + (2 << 2) + ((U32)litSize<<4) + ((U32)cLitSize<<18);
MEM_writeLE32(ostart, lhc);
break;
}
case 5: /* 2 - 2 - 18 - 18 */
{ U32 const lhc = hType + (3 << 2) + ((U32)litSize<<4) + ((U32)cLitSize<<22);
MEM_writeLE32(ostart, lhc);
ostart[4] = (BYTE)(cLitSize >> 10);
break;
}
default: /* not possible : lhSize is {3,4,5} */
assert(0);
}
*entropyWritten = 1;
DEBUGLOG(5, "Compressed literals: %u -> %u", (U32)litSize, (U32)(op-ostart));
return op-ostart;
}
static size_t ZSTD_seqDecompressedSize(seqStore_t const* seqStore, const seqDef* sequences, size_t nbSeq, size_t litSize, int lastSequence) {
const seqDef* const sstart = sequences;
const seqDef* const send = sequences + nbSeq;
const seqDef* sp = sstart;
size_t matchLengthSum = 0;
size_t litLengthSum = 0;
(void)(litLengthSum); /* suppress unused variable warning on some environments */
while (send-sp > 0) {
ZSTD_sequenceLength const seqLen = ZSTD_getSequenceLength(seqStore, sp);
litLengthSum += seqLen.litLength;
matchLengthSum += seqLen.matchLength;
sp++;
}
assert(litLengthSum <= litSize);
if (!lastSequence) {
assert(litLengthSum == litSize);
}
return matchLengthSum + litSize;
}
/* ZSTD_compressSubBlock_sequences() :
* Compresses sequences section for a sub-block.
* fseMetadata->llType, fseMetadata->ofType, and fseMetadata->mlType have
* symbol compression modes for the super-block.
* The first successfully compressed block will have these in its header.
* We set entropyWritten=1 when we succeed in compressing the sequences.
* The following sub-blocks will always have repeat mode.
* @return : compressed size of sequences section of a sub-block
* Or 0 if it is unable to compress
* Or error code. */
static size_t ZSTD_compressSubBlock_sequences(const ZSTD_fseCTables_t* fseTables,
const ZSTD_fseCTablesMetadata_t* fseMetadata,
const seqDef* sequences, size_t nbSeq,
const BYTE* llCode, const BYTE* mlCode, const BYTE* ofCode,
const ZSTD_CCtx_params* cctxParams,
void* dst, size_t dstCapacity,
const int bmi2, int writeEntropy, int* entropyWritten)
{
const int longOffsets = cctxParams->cParams.windowLog > STREAM_ACCUMULATOR_MIN;
BYTE* const ostart = (BYTE*)dst;
BYTE* const oend = ostart + dstCapacity;
BYTE* op = ostart;
BYTE* seqHead;
DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (nbSeq=%zu, writeEntropy=%d, longOffsets=%d)", nbSeq, writeEntropy, longOffsets);
*entropyWritten = 0;
/* Sequences Header */
RETURN_ERROR_IF((oend-op) < 3 /*max nbSeq Size*/ + 1 /*seqHead*/,
dstSize_tooSmall, "");
if (nbSeq < 0x7F)
*op++ = (BYTE)nbSeq;
else if (nbSeq < LONGNBSEQ)
op[0] = (BYTE)((nbSeq>>8) + 0x80), op[1] = (BYTE)nbSeq, op+=2;
else
op[0]=0xFF, MEM_writeLE16(op+1, (U16)(nbSeq - LONGNBSEQ)), op+=3;
if (nbSeq==0) {
return op - ostart;
}
/* seqHead : flags for FSE encoding type */
seqHead = op++;
DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (seqHeadSize=%u)", (unsigned)(op-ostart));
if (writeEntropy) {
const U32 LLtype = fseMetadata->llType;
const U32 Offtype = fseMetadata->ofType;
const U32 MLtype = fseMetadata->mlType;
DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (fseTablesSize=%zu)", fseMetadata->fseTablesSize);
*seqHead = (BYTE)((LLtype<<6) + (Offtype<<4) + (MLtype<<2));
ZSTD_memcpy(op, fseMetadata->fseTablesBuffer, fseMetadata->fseTablesSize);
op += fseMetadata->fseTablesSize;
} else {
const U32 repeat = set_repeat;
*seqHead = (BYTE)((repeat<<6) + (repeat<<4) + (repeat<<2));
}
{ size_t const bitstreamSize = ZSTD_encodeSequences(
op, oend - op,
fseTables->matchlengthCTable, mlCode,
fseTables->offcodeCTable, ofCode,
fseTables->litlengthCTable, llCode,
sequences, nbSeq,
longOffsets, bmi2);
FORWARD_IF_ERROR(bitstreamSize, "ZSTD_encodeSequences failed");
op += bitstreamSize;
/* zstd versions <= 1.3.4 mistakenly report corruption when
* FSE_readNCount() receives a buffer < 4 bytes.
* Fixed by https://github.com/facebook/zstd/pull/1146.
* This can happen when the last set_compressed table present is 2
* bytes and the bitstream is only one byte.
* In this exceedingly rare case, we will simply emit an uncompressed
* block, since it isn't worth optimizing.
*/
#ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION
if (writeEntropy && fseMetadata->lastCountSize && fseMetadata->lastCountSize + bitstreamSize < 4) {
/* NCountSize >= 2 && bitstreamSize > 0 ==> lastCountSize == 3 */
assert(fseMetadata->lastCountSize + bitstreamSize == 3);
DEBUGLOG(5, "Avoiding bug in zstd decoder in versions <= 1.3.4 by "
"emitting an uncompressed block.");
return 0;
}
#endif
DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (bitstreamSize=%zu)", bitstreamSize);
}
/* zstd versions <= 1.4.0 mistakenly report error when
* sequences section body size is less than 3 bytes.
* Fixed by https://github.com/facebook/zstd/pull/1664.
* This can happen when the previous sequences section block is compressed
* with rle mode and the current block's sequences section is compressed
* with repeat mode where sequences section body size can be 1 byte.
*/
#ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION
if (op-seqHead < 4) {
DEBUGLOG(5, "Avoiding bug in zstd decoder in versions <= 1.4.0 by emitting "
"an uncompressed block when sequences are < 4 bytes");
return 0;
}
#endif
*entropyWritten = 1;
return op - ostart;
}
/* ZSTD_compressSubBlock() :
* Compresses a single sub-block.
* @return : compressed size of the sub-block
* Or 0 if it failed to compress. */
static size_t ZSTD_compressSubBlock(const ZSTD_entropyCTables_t* entropy,
const ZSTD_entropyCTablesMetadata_t* entropyMetadata,
const seqDef* sequences, size_t nbSeq,
const BYTE* literals, size_t litSize,
const BYTE* llCode, const BYTE* mlCode, const BYTE* ofCode,
const ZSTD_CCtx_params* cctxParams,
void* dst, size_t dstCapacity,
const int bmi2,
int writeLitEntropy, int writeSeqEntropy,
int* litEntropyWritten, int* seqEntropyWritten,
U32 lastBlock)
{
BYTE* const ostart = (BYTE*)dst;
BYTE* const oend = ostart + dstCapacity;
BYTE* op = ostart + ZSTD_blockHeaderSize;
DEBUGLOG(5, "ZSTD_compressSubBlock (litSize=%zu, nbSeq=%zu, writeLitEntropy=%d, writeSeqEntropy=%d, lastBlock=%d)",
litSize, nbSeq, writeLitEntropy, writeSeqEntropy, lastBlock);
{ size_t cLitSize = ZSTD_compressSubBlock_literal((const HUF_CElt*)entropy->huf.CTable,
&entropyMetadata->hufMetadata, literals, litSize,
op, oend-op, bmi2, writeLitEntropy, litEntropyWritten);
FORWARD_IF_ERROR(cLitSize, "ZSTD_compressSubBlock_literal failed");
if (cLitSize == 0) return 0;
op += cLitSize;
}
{ size_t cSeqSize = ZSTD_compressSubBlock_sequences(&entropy->fse,
&entropyMetadata->fseMetadata,
sequences, nbSeq,
llCode, mlCode, ofCode,
cctxParams,
op, oend-op,
bmi2, writeSeqEntropy, seqEntropyWritten);
FORWARD_IF_ERROR(cSeqSize, "ZSTD_compressSubBlock_sequences failed");
if (cSeqSize == 0) return 0;
op += cSeqSize;
}
/* Write block header */
{ size_t cSize = (op-ostart)-ZSTD_blockHeaderSize;
U32 const cBlockHeader24 = lastBlock + (((U32)bt_compressed)<<1) + (U32)(cSize << 3);
MEM_writeLE24(ostart, cBlockHeader24);
}
return op-ostart;
}
static size_t ZSTD_estimateSubBlockSize_literal(const BYTE* literals, size_t litSize,
const ZSTD_hufCTables_t* huf,
const ZSTD_hufCTablesMetadata_t* hufMetadata,
void* workspace, size_t wkspSize,
int writeEntropy)
{
unsigned* const countWksp = (unsigned*)workspace;
unsigned maxSymbolValue = 255;
size_t literalSectionHeaderSize = 3; /* Use hard coded size of 3 bytes */
if (hufMetadata->hType == set_basic) return litSize;
else if (hufMetadata->hType == set_rle) return 1;
else if (hufMetadata->hType == set_compressed || hufMetadata->hType == set_repeat) {
size_t const largest = HIST_count_wksp (countWksp, &maxSymbolValue, (const BYTE*)literals, litSize, workspace, wkspSize);
if (ZSTD_isError(largest)) return litSize;
{ size_t cLitSizeEstimate = HUF_estimateCompressedSize((const HUF_CElt*)huf->CTable, countWksp, maxSymbolValue);
if (writeEntropy) cLitSizeEstimate += hufMetadata->hufDesSize;
return cLitSizeEstimate + literalSectionHeaderSize;
} }
assert(0); /* impossible */
return 0;
}
static size_t ZSTD_estimateSubBlockSize_symbolType(symbolEncodingType_e type,
const BYTE* codeTable, unsigned maxCode,
size_t nbSeq, const FSE_CTable* fseCTable,
const U8* additionalBits,
short const* defaultNorm, U32 defaultNormLog, U32 defaultMax,
void* workspace, size_t wkspSize)
{
unsigned* const countWksp = (unsigned*)workspace;
const BYTE* ctp = codeTable;
const BYTE* const ctStart = ctp;
const BYTE* const ctEnd = ctStart + nbSeq;
size_t cSymbolTypeSizeEstimateInBits = 0;
unsigned max = maxCode;
HIST_countFast_wksp(countWksp, &max, codeTable, nbSeq, workspace, wkspSize); /* can't fail */
if (type == set_basic) {
/* We selected this encoding type, so it must be valid. */
assert(max <= defaultMax);
cSymbolTypeSizeEstimateInBits = max <= defaultMax
? ZSTD_crossEntropyCost(defaultNorm, defaultNormLog, countWksp, max)
: ERROR(GENERIC);
} else if (type == set_rle) {
cSymbolTypeSizeEstimateInBits = 0;
} else if (type == set_compressed || type == set_repeat) {
cSymbolTypeSizeEstimateInBits = ZSTD_fseBitCost(fseCTable, countWksp, max);
}
if (ZSTD_isError(cSymbolTypeSizeEstimateInBits)) return nbSeq * 10;
while (ctp < ctEnd) {
if (additionalBits) cSymbolTypeSizeEstimateInBits += additionalBits[*ctp];
else cSymbolTypeSizeEstimateInBits += *ctp; /* for offset, offset code is also the number of additional bits */
ctp++;
}
return cSymbolTypeSizeEstimateInBits / 8;
}
static size_t ZSTD_estimateSubBlockSize_sequences(const BYTE* ofCodeTable,
const BYTE* llCodeTable,
const BYTE* mlCodeTable,
size_t nbSeq,
const ZSTD_fseCTables_t* fseTables,
const ZSTD_fseCTablesMetadata_t* fseMetadata,
void* workspace, size_t wkspSize,
int writeEntropy)
{
size_t const sequencesSectionHeaderSize = 3; /* Use hard coded size of 3 bytes */
size_t cSeqSizeEstimate = 0;
if (nbSeq == 0) return sequencesSectionHeaderSize;
cSeqSizeEstimate += ZSTD_estimateSubBlockSize_symbolType(fseMetadata->ofType, ofCodeTable, MaxOff,
nbSeq, fseTables->offcodeCTable, NULL,
OF_defaultNorm, OF_defaultNormLog, DefaultMaxOff,
workspace, wkspSize);
cSeqSizeEstimate += ZSTD_estimateSubBlockSize_symbolType(fseMetadata->llType, llCodeTable, MaxLL,
nbSeq, fseTables->litlengthCTable, LL_bits,
LL_defaultNorm, LL_defaultNormLog, MaxLL,
workspace, wkspSize);
cSeqSizeEstimate += ZSTD_estimateSubBlockSize_symbolType(fseMetadata->mlType, mlCodeTable, MaxML,
nbSeq, fseTables->matchlengthCTable, ML_bits,
ML_defaultNorm, ML_defaultNormLog, MaxML,
workspace, wkspSize);
if (writeEntropy) cSeqSizeEstimate += fseMetadata->fseTablesSize;
return cSeqSizeEstimate + sequencesSectionHeaderSize;
}
static size_t ZSTD_estimateSubBlockSize(const BYTE* literals, size_t litSize,
const BYTE* ofCodeTable,
const BYTE* llCodeTable,
const BYTE* mlCodeTable,
size_t nbSeq,
const ZSTD_entropyCTables_t* entropy,
const ZSTD_entropyCTablesMetadata_t* entropyMetadata,
void* workspace, size_t wkspSize,
int writeLitEntropy, int writeSeqEntropy) {
size_t cSizeEstimate = 0;
cSizeEstimate += ZSTD_estimateSubBlockSize_literal(literals, litSize,
&entropy->huf, &entropyMetadata->hufMetadata,
workspace, wkspSize, writeLitEntropy);
cSizeEstimate += ZSTD_estimateSubBlockSize_sequences(ofCodeTable, llCodeTable, mlCodeTable,
nbSeq, &entropy->fse, &entropyMetadata->fseMetadata,
workspace, wkspSize, writeSeqEntropy);
return cSizeEstimate + ZSTD_blockHeaderSize;
}
static int ZSTD_needSequenceEntropyTables(ZSTD_fseCTablesMetadata_t const* fseMetadata)
{
if (fseMetadata->llType == set_compressed || fseMetadata->llType == set_rle)
return 1;
if (fseMetadata->mlType == set_compressed || fseMetadata->mlType == set_rle)
return 1;
if (fseMetadata->ofType == set_compressed || fseMetadata->ofType == set_rle)
return 1;
return 0;
}
/* ZSTD_compressSubBlock_multi() :
* Breaks super-block into multiple sub-blocks and compresses them.
* Entropy will be written to the first block.
* The following blocks will use repeat mode to compress.
* All sub-blocks are compressed blocks (no raw or rle blocks).
* @return : compressed size of the super block (which is multiple ZSTD blocks)
* Or 0 if it failed to compress. */
static size_t ZSTD_compressSubBlock_multi(const seqStore_t* seqStorePtr,
const ZSTD_compressedBlockState_t* prevCBlock,
ZSTD_compressedBlockState_t* nextCBlock,
const ZSTD_entropyCTablesMetadata_t* entropyMetadata,
const ZSTD_CCtx_params* cctxParams,
void* dst, size_t dstCapacity,
const void* src, size_t srcSize,
const int bmi2, U32 lastBlock,
void* workspace, size_t wkspSize)
{
const seqDef* const sstart = seqStorePtr->sequencesStart;
const seqDef* const send = seqStorePtr->sequences;
const seqDef* sp = sstart;
const BYTE* const lstart = seqStorePtr->litStart;
const BYTE* const lend = seqStorePtr->lit;
const BYTE* lp = lstart;
BYTE const* ip = (BYTE const*)src;
BYTE const* const iend = ip + srcSize;
BYTE* const ostart = (BYTE*)dst;
BYTE* const oend = ostart + dstCapacity;
BYTE* op = ostart;
const BYTE* llCodePtr = seqStorePtr->llCode;
const BYTE* mlCodePtr = seqStorePtr->mlCode;
const BYTE* ofCodePtr = seqStorePtr->ofCode;
size_t targetCBlockSize = cctxParams->targetCBlockSize;
size_t litSize, seqCount;
int writeLitEntropy = entropyMetadata->hufMetadata.hType == set_compressed;
int writeSeqEntropy = 1;
int lastSequence = 0;
DEBUGLOG(5, "ZSTD_compressSubBlock_multi (litSize=%u, nbSeq=%u)",
(unsigned)(lend-lp), (unsigned)(send-sstart));
litSize = 0;
seqCount = 0;
do {
size_t cBlockSizeEstimate = 0;
if (sstart == send) {
lastSequence = 1;
} else {
const seqDef* const sequence = sp + seqCount;
lastSequence = sequence == send - 1;
litSize += ZSTD_getSequenceLength(seqStorePtr, sequence).litLength;
seqCount++;
}
if (lastSequence) {
assert(lp <= lend);
assert(litSize <= (size_t)(lend - lp));
litSize = (size_t)(lend - lp);
}
/* I think there is an optimization opportunity here.
* Calling ZSTD_estimateSubBlockSize for every sequence can be wasteful
* since it recalculates estimate from scratch.
* For example, it would recount literal distribution and symbol codes every time.
*/
cBlockSizeEstimate = ZSTD_estimateSubBlockSize(lp, litSize, ofCodePtr, llCodePtr, mlCodePtr, seqCount,
&nextCBlock->entropy, entropyMetadata,
workspace, wkspSize, writeLitEntropy, writeSeqEntropy);
if (cBlockSizeEstimate > targetCBlockSize || lastSequence) {
int litEntropyWritten = 0;
int seqEntropyWritten = 0;
const size_t decompressedSize = ZSTD_seqDecompressedSize(seqStorePtr, sp, seqCount, litSize, lastSequence);
const size_t cSize = ZSTD_compressSubBlock(&nextCBlock->entropy, entropyMetadata,
sp, seqCount,
lp, litSize,
llCodePtr, mlCodePtr, ofCodePtr,
cctxParams,
op, oend-op,
bmi2, writeLitEntropy, writeSeqEntropy,
&litEntropyWritten, &seqEntropyWritten,
lastBlock && lastSequence);
FORWARD_IF_ERROR(cSize, "ZSTD_compressSubBlock failed");
if (cSize > 0 && cSize < decompressedSize) {
DEBUGLOG(5, "Committed the sub-block");
assert(ip + decompressedSize <= iend);
ip += decompressedSize;
sp += seqCount;
lp += litSize;
op += cSize;
llCodePtr += seqCount;
mlCodePtr += seqCount;
ofCodePtr += seqCount;
litSize = 0;
seqCount = 0;
/* Entropy only needs to be written once */
if (litEntropyWritten) {
writeLitEntropy = 0;
}
if (seqEntropyWritten) {
writeSeqEntropy = 0;
}
}
}
} while (!lastSequence);
if (writeLitEntropy) {
DEBUGLOG(5, "ZSTD_compressSubBlock_multi has literal entropy tables unwritten");
ZSTD_memcpy(&nextCBlock->entropy.huf, &prevCBlock->entropy.huf, sizeof(prevCBlock->entropy.huf));
}
if (writeSeqEntropy && ZSTD_needSequenceEntropyTables(&entropyMetadata->fseMetadata)) {
/* If we haven't written our entropy tables, then we've violated our contract and
* must emit an uncompressed block.
*/
DEBUGLOG(5, "ZSTD_compressSubBlock_multi has sequence entropy tables unwritten");
return 0;
}
if (ip < iend) {
size_t const cSize = ZSTD_noCompressBlock(op, oend - op, ip, iend - ip, lastBlock);
DEBUGLOG(5, "ZSTD_compressSubBlock_multi last sub-block uncompressed, %zu bytes", (size_t)(iend - ip));
FORWARD_IF_ERROR(cSize, "ZSTD_noCompressBlock failed");
assert(cSize != 0);
op += cSize;
/* We have to regenerate the repcodes because we've skipped some sequences */
if (sp < send) {
seqDef const* seq;
repcodes_t rep;
ZSTD_memcpy(&rep, prevCBlock->rep, sizeof(rep));
for (seq = sstart; seq < sp; ++seq) {
ZSTD_updateRep(rep.rep, seq->offBase - 1, ZSTD_getSequenceLength(seqStorePtr, seq).litLength == 0);
}
ZSTD_memcpy(nextCBlock->rep, &rep, sizeof(rep));
}
}
DEBUGLOG(5, "ZSTD_compressSubBlock_multi compressed");
return op-ostart;
}
size_t ZSTD_compressSuperBlock(ZSTD_CCtx* zc,
void* dst, size_t dstCapacity,
void const* src, size_t srcSize,
unsigned lastBlock) {
ZSTD_entropyCTablesMetadata_t entropyMetadata;
FORWARD_IF_ERROR(ZSTD_buildBlockEntropyStats(&zc->seqStore,
&zc->blockState.prevCBlock->entropy,
&zc->blockState.nextCBlock->entropy,
&zc->appliedParams,
&entropyMetadata,
zc->entropyWorkspace, ENTROPY_WORKSPACE_SIZE /* statically allocated in resetCCtx */), "");
return ZSTD_compressSubBlock_multi(&zc->seqStore,
zc->blockState.prevCBlock,
zc->blockState.nextCBlock,
&entropyMetadata,
&zc->appliedParams,
dst, dstCapacity,
src, srcSize,
zc->bmi2, lastBlock,
zc->entropyWorkspace, ENTROPY_WORKSPACE_SIZE /* statically allocated in resetCCtx */);
}